July 1, 2010 – Federal Register Recent Federal Regulation Documents

The National Highway Traffic Safety Administration (NHTSA) published a document in the Federal Register of June 21, 2010, announcing NHTSA's determination that there were no new model year (MY) 2011 light-duty truck lines subject to the requirements of the Federal motor vehicle theft prevention standard. The final rule also identified those vehicle lines that had been granted an exemption from the parts- marking requirements for the 2011 model year and those vehicle lines the agency removed because certain vehicle lines had been discontinued more than 5 years ago. This document corrects certain information published in the SUPPLEMENTARY INFORMATION section and Appendix A-I listing of the final rule. All previous information associated with the published notice remains the same.

Each applicant, a closed-end investment company, seeks an order declaring that it has ceased to be an investment company. Applicants have never made a public offering of their securities and do not propose to make a public offering or engage in business of any kind.

We, the U.S. Fish and Wildlife Service, invite the public to comment on the following applications to conduct certain activities with endangered species. With some exceptions, the Endangered Species Act (ESA) prohibits activities with listed species unless a Federal permit is issued that allows such activities. The ESA laws require that we invite public comment before issuing these permits.

The FAA proposes to supersede an existing airworthiness directive (AD) for Pratt & Whitney (PW) JT8D-209, -217, -217A, -217C, and -219 series turbofan engines. That AD requires initial and repetitive torque inspections of the 3rd stage and 4th stage low- pressure turbine (LPT) blades for shroud notch wear and replacement of the blade if wear limits are exceeded. That AD also requires replacing LPT-to-exhaust case bolts and nuts with bolts and nuts made of Tinidur material. This proposed AD would require the same actions but would require replacement of the LPT-to-exhaust case bolts and nuts with longer bolts made of Tinidur material, with nuts made of Tinidur material, and installation of crushable sleeve spacers on the bolts. This proposed AD results from nine reports of failure of Tinidur material LPT-to-exhaust case bolts since AD 2005-02-03 became effective. We are proposing this AD to prevent turbine blade failures that could result in uncontained engine debris and damage to the airplane.

In compliance with section 3506(c)(2)(A) of the Paperwork Reduction Act of 1995, the Office of the Under Secretary of Defense (Personnel and Readiness) announces the following proposed public information collection and seeks public comment on the provisions thereof. Comments are invited on: Whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility; the accuracy of the agency's estimate of burden of the proposed information collection; ways to enhance the quality, utility, and clarity of the information to be collected; and ways to minimize the burden of the information collection on respondents, including the use of automated collection techniques or other forms of information technology.

In compliance with section 3506(c)(2)(A) of the Paperwork Reduction Act of 1995, the Defense Finance and Accounting Service proposes to extend a public information collection and seeks public comment on the provisions thereof. Comments are invited on: Whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility; the accuracy of the agency's estimate of the burden of the proposed information collection; ways to enhance the quality, utility and clarity of the information to be collected; and ways to minimize the burden of the information collection on respondents, including through the use of automated collection techniques or other forms of information technology.

In compliance with section 3506(c)(2)(A) of the Paperwork Reduction Act of 1995, the Office of the Under Secretary of Defense (Personnel and Readiness) announces the following proposed reinstatement of a public information collection and seeks public comment on the provisions thereof. Comments are invited on: Whether the proposed collection of information is necessary for the proper performance of the functions of the agency, including whether the information shall have practical utility; the accuracy of the agency's estimate of burden of the proposed information collection; ways to enhance the quality, utility, and clarity of the information to be collected; and ways to minimize the burden of the information collection on respondents, including through the use of automated collection techniques or other forms of information technology.

Background. Notice is hereby given of the final approval of a proposed information collection by the Board of Governors of the Federal Reserve System (Board) under OMB delegated authority, as per 5 CFR 1320.16 (OMB Regulations on Controlling Paperwork Burdens on the Public). Board-approved collections of information are incorporated into the official OMB inventory of currently approved collections of information. Copies of the Paperwork Reduction Act Submission, supporting statements and approved collection of information instrument(s) are placed into OMB's public docket files. The Federal Reserve may not conduct or sponsor, and the respondent is not required to respond to, an information collection that has been extended, revised, or implemented on or after October 1, 1995, unless it displays a currently valid OMB control number.

This notice details the application requirements and procedures for obtaining funding for high-speed and intercity passenger rail Service Development Programs available under the Transportation, Housing and Urban Development, and Related Agencies Appropriations Act for 2010 (Div. A of the Consolidated Appropriations Act, 2010 (Pub. L. 111-117, Dec. 16, 2009)). The Federal Railroad Administration has issued a separate notice in today's edition of the Federal Register for Fiscal Year 2010 funding made available for Individual Projects.

The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain Model MD-90-30 airplanes. The existing AD currently requires a detailed inspection for certain defects of the upper fasteners of the aft mount support fittings of the left and right engines, and corrective actions if necessary. This proposed AD would instead require repetitive replacement of the upper row of fasteners of the support fittings of the engine aft mount with new fasteners; and perform repetitive general visual inspections for defects of the lower row fasteners (Row B) of the support fittings of the left and right engine aft mounts, and replacement of all clearance fit fasteners in the lower row if necessary. This proposed AD results from reports of loose, cracked, or missing fasteners in the aft mount support fitting of the left and right engines. We are proposing this AD to prevent loose, cracked, or missing fasteners in the engine aft mount support fittings, which could lead to separation of the support fittings from the pylon, and could result in separation of the engine from the airplane.

The Department of the Treasury, as part of its continuing effort to reduce paperwork and respondent burden, invites the general public and other Federal agencies to take this opportunity to comment on proposed and/or continuing information collections, as required by the Paperwork Reduction Act of 1995, Public Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently, the IRS is soliciting comments concerning Revenue Procedure 2004-35, Late Spousal S Corp Consents in Community Property States.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: