Department of Transportation July 1, 2010 – Federal Register Recent Federal Regulation Documents

The FAA, with National Park Service (NPS) as a cooperating agency, has initiated development of an Air Tour Management Plan (ATMP) for Petrified Forest National Park (Petrified Forest), pursuant to the National Parks Air Tour Management Act of 2000 (Pub. L. 106-181) and its implementing regulations (14 CFR Part 136, Subpart B, National Parks Air Tour Management). The objective of the ATMP is to develop acceptable and effective measures to mitigate or prevent the significant adverse impacts, if any, of commercial air tour operations on the natural resources, cultural resources, and visitor experiences of a national park unit and any Tribal lands within or abutting the park. It should be noted that the ATMP has no authorization over other non-air-tour operations such as military and general aviation operations. In compliance with the National Environmental Policy Act of 1969 (NEPA) and FAA Order 1050.1E, an Environmental Assessment (EA) is being prepared.

Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections. This document describes an existing collection of information for an existing regulation for the aftermarket modification of vehicles to accommodate people with disabilities, for which NHTSA intends to seek renewed OMB approval.

This notice details the application requirements and procedures for obtaining funding for individual high-speed and intercity passenger rail projects available under the Transportation, Housing and Urban Development, and Related Agencies Appropriations Act for 2010 (Div. A of the Consolidated Appropriations Act, 2010 (Pub. L. 111-117, Dec. 16, 2009)). The Federal Railroad Administration has issued a separate notice in today's edition of the Federal Register for Fiscal Year 2010 funding made available for Service Development Programs.

We propose to adopt a new airworthiness directive (AD) for all Model 727, 727C, 727-100, 727-100C, 727-200, and 727-200F series airplanes. This proposed AD would require repetitive detailed inspections of the aft pressure bulkhead web for cracking, and repair if necessary. For certain airplanes, this proposed AD also would provide for an optional preventative modification of the aft pressure bulkhead web, which would terminate certain repetitive detailed inspections. This proposed AD results from reports of cracks in the aft pressure bulkhead web. We are proposing this AD to detect and correct cracking in the aft pressure bulkhead web, which could adversely affect the structural integrity of the airplane, resulting in difficulty maintaining cabin pressurization or rapid decompression of the airplane.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Model 737-300, -400, and -500 series airplanes. That AD currently requires an inspection to determine the manufacturer and manufacture date of the oxygen masks in the passenger service unit and the lavatory and attendant box assemblies, corrective action if necessary, and other specified action. This new AD expands the applicability in the existing AD. This AD results from a determination indicating that additional airplanes may be subject to the identified unsafe condition. We are issuing this AD to prevent the in-line flow indicators of the passenger oxygen masks from fracturing and separating, which could inhibit oxygen flow to the masks and consequently result in exposure of the passengers and cabin attendants to hypoxia following a depressurization event.

This document publishes in the Federal Register an amendment adopting airworthiness directive (AD) 2009-15-16 that was sent previously to all known U.S. owners and operators of the McDonnell Douglas Corporation airplanes identified above by individual notices. This AD requires modifying the flight deck door. This AD is prompted by a report indicating that certain equipment of the flight deck door is defective. We are issuing this AD to prevent failure of this equipment, which could jeopardize flight safety.

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Model 747 airplanes. That AD currently requires repetitive inspections of the body station (BS) 2598 bulkhead, and corrective actions if necessary. That AD also currently requires a terminating modification for certain repetitive inspections and a post- modification inspection of the modified area. This new AD continues to require those actions using revised service information. For certain airplanes, this AD requires new repetitive inspections, an interim modification, and post-interim modification inspections. For certain airplanes, this AD requires replacing any previously repaired aft inner chord and reinstalling the terminating modification. For airplanes that are converted to the Model 747-400 large cargo freighter (LCF) configuration, this new AD reduces the threshold and repeat intervals of certain post-modification inspections. For all airplanes, this new AD also requires certain inspections of the upper aft outer chords and diagonal brace attachment fittings, flanges, and rods to continue after the terminating modification. This AD results from reports of cracked aft inner chords on airplanes after certain requirements of the existing AD were done. We are issuing this AD to prevent fatigue cracking of the BS 2598 bulkhead structure, which could result in inability of the structure to carry horizontal stabilizer flight loads, and loss of controllability of the airplane.

The FAA is adopting a new airworthiness directive (AD) for certain serial numbers (S/Ns) of Ontic Engineering and Manufacturing, Inc. propeller governors, part numbers (P/Ns) C210776, T210761, D210760, and J210761. This AD requires removal of the affected propeller governors from service. This AD results from three reports received of failed propeller governors. We are issuing this AD to prevent loss of propeller pitch control, damage to the propeller governor, and internal damage to the engine, which could prevent continued safe flight or safe landing.