Federal Aviation Administration December 2018 – Federal Register Recent Federal Regulation Documents
Results 1 - 50 of 122
Airworthiness Directives; Airbus SAS Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus SAS Model A320-214, A320-232, A320-233, A321-211 and A321-231 airplanes. This AD was prompted by an investigation that revealed that the outer cylinder of a certain ram air turbine (RAT) actuator was not properly deburred in accordance with manufacturing specifications. This AD requires a replacement of affected RAT actuators. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of thrust reverser actuators (TRAs) jamming. This AD requires repetitive greasing of the TRAs, dispatch restrictions and maintenance procedure revisions. We are issuing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace for the Following Alaska Towns; Barrow, AK; Chevak, AK; Clarks Point, AK; Elim, AK; and Golovin, AK
This action modifies Class E airspace extending upward from 1,200 feet above the surface in Alaska at Wiley Post/Will Rogers Memorial Airport, Barrow; Chevak Airport; Clarks Point Airport; Elim Airport; and Golovin Airport. This action adds exclusionary language to the legal descriptions of these airports to exclude Class E airspace extending beyond 12 miles from the shoreline, and ensures the safety and management of aircraft within the National Airspace System. Also, an editorial change is made in the associated airspace designation for Chevak Airport.
Amendment of Class E Airspace; Badami, AK
This action modifies Class E airspace extending upward from 1,200 feet above the surface at Badami Airport, AK, and adds exclusionary language to the legal description of the airport to ensure the safety and management of aircraft within the National Airspace System. Also, the geographic coordinates of the airport are updated.
Proposed Removal of Jet Route J-147; Eastern United States
This action proposes to remove jet route J-147 which currently extends between Beckley, WV, and Casanova, VA. This action is necessary due to the planned decommissioning of the Greenbrier, WV, VOR/DME navigation aid which provides navigation guidance for segments of the route. The Greenbrier VOR/DME is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Amendment of VOR Federal Airways V-170 and V-219 in the Vicinity of Fairmont, MN
This action modifies VHF Omnidirectional Range (VOR) Federal airways V-170 and V-219 in the vicinity of Fairmont, MN. The FAA is taking this action due to the planned decommissioning of the Fairmont, MN, VOR navigation aid (NAVAID), which provides navigation guidance for portions of the affected air traffic service (ATS) routes. The Fairmont VOR is being decommissioned as part of the VOR Minimum Operational Network (MON) program.
Proposed Amendment of VOR Federal Airway V-18 in the Vicinity of Talladega, AL
This action proposes to modify VHF Omnidirectional Range (VOR) Federal airway V-18, in the Vicinity of Talladega, AL. This action is necessary due to the planned decommissioning of the Talladega, AL, VOR/ DME navigation aid which provides navigation guidance for segments of the route.
Proposed Amendment of Area Navigation (RNAV) Route T-299, and Establishment of T-318 and T-360; Eastern United States.
This action proposes to modify low altitude RNAV route T-299, and establish routes T-318 and T-360 in the eastern United States. The proposal would expand the availability of RNAV routing in support of transitioning the National Airspace System (NAS) from ground-based to satellite-based navigation.
Proposed Amendment of VOR Federal Airways V-115, V-184, V-188, and V-542 in the Vicinity of Tidioute, PA
This action proposes to modify VHF Omnidirectional Range (VOR) Federal airways V-115, V-184, V-188, and V-542 due to planned decommissioning of the Tidioute, PA, VORTAC navigation aid which provides navigation guidance for segments of the routes.
Establishment of Class E Airspace and Amendment of Class D and Class E Airspace; Olympia, WA
This action establishes Class E airspace extending upward from 700 feet above the surface and modifies Class E airspace designated as an extension at Olympia Regional Airport (formerly Olympia Airport). This action removes the Notice to Airmen (NOTAM) part-time status for Class E airspace designated as an extension, and updates the airport name and geographic coordinates in the associated Class D and E airspace areas to match the FAA's aeronautical database. These changes are necessary to accommodate airspace redesign for the safety and management of instrument flight rules (IFR) operations at the airport within the National Airspace System. Also, an editorial change is made to the Class D and Class E airspace legal descriptions replacing Airport/Facility Directory with the term Chart Supplement.
Establishment of Class E Airspace; Engelhard, NC
This action establishes Class E airspace extending upward from 700 feet above the surface at Hyde County Airport, Engelhard, NC, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures serving this airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Amendment of Class E Airspace; Atqasuk, AK
This action modifies Class E airspace extending upward from 1,200 feet above the surface at Atqasuk Edward Burnell Sr. Memorial Airport, Atqasuk, AK. This action adds exclusionary language to the legal description of the airport to ensure the safety and management of aircraft within the National Airspace System. Also, the geographic coordinates of the airport are updated.
Amendment of Class E Airspace for the following Alaska Towns; Nuiqsut, AK; Perryville, AK; Pilot Point, AK; and Point Lay, AK
This action modifies Class E airspace extending upward from 1,200 feet above the surface in Alaska at Nuiqsut Airport; Oooguruk Island Heliport, Nuiqsut; Pioneer Heliport, Nuiqsut; Perryville Airport; Pilot Point Airport; and Point Lay Airport. This action adds exclusionary language to the legal descriptions of these airports to exclude Class E airspace extending beyond 12 miles from the shoreline, and ensures the safety and management of aircraft within the National Airspace System. Also, this action removes the heliport name from the airspace designation of Oooguruk Island Heliport and Pioneer Heliport.
Airworthiness Directives; Airbus SAS Airplanes
We propose to adopt a new airworthiness directive (AD) for all Airbus SAS Model A330-223, A330-223F, A330-321, A330-322, and A330-323 airplanes. This proposed AD was prompted by a report of fatigue cracking in the latch beam gussets on a certain thrust reverser (T/R). This proposed AD would require a one-time special detailed inspection of certain latch beam gussets of certain T/Rs for cracks, and modifying the latch beam gussets of the T/Rs, if necessary. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by reports of loose, worn, or missing attachment bolts for the main landing gear (MLG) center door assemblies. This AD requires repetitive detailed inspections of the forward and aft MLG center door assembly attachments for loose, missing, damaged, or bottomed-out attachment bolts, and any wear to the retention clip assemblies as applicable; and applicable on-condition actions. This AD also provides an optional terminating action for the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777 airplanes. This AD was prompted by reports of latently failed engine fuel shutoff spar valves discovered during fuel filter replacement. This AD requires inspecting to determine the part numbers (P/Ns) of the motor-operated valve (MOV) actuators at the engine fuel shutoff spar valve positions, installing MOV actuators having a certain acceptable part number or software if necessary, and revising the maintenance or inspection program to add a new airworthiness limitation. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by a report that due to an issue with the flight warning system (FWS) logic, it is possible that the ``AIR Auxiliary Power Unit (APU) BLEED LEAK'' electronic centralized aircraft monitoring (ECAM) alert can trigger several times. This AD requires revising the airplane flight manual (AFM) to incorporate procedures related to an APU bleed leak. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
We propose to remove Airworthiness Directive (AD) 2012-02-18, which applies to all Dassault Aviation Model MYSTERE-FALCON 50 airplanes. AD 2012-02-18 requires revising the maintenance program to include revised airworthiness limitations. AD 2012-02-18 is no longer necessary because we have since issued AD 2017-09-03 to address the unsafe condition. Accordingly, we propose to remove AD 2012-02-18.
Airworthiness Directives; Airbus SAS Airplanes
We propose to remove Airworthiness Directive (AD) 2007-22-05 and AD 2013-13-13 (referred to after this as ``the affected ADs''), which apply to Airbus SAS Model A300-600 and A310 series airplanes. The affected ADs require certain actions to address various unsafe conditions. The affected ADs are no longer necessary because we have since issued other ADs that address these unsafe conditions. Accordingly, we propose to remove the affected ADs.
Airworthiness Directives; Airbus SAS Airplanes
We are superseding Airworthiness Directive (AD) 2017-22-07, which applied to certain Airbus SAS Model A319 series airplanes; Model A320-211,-212, -214, -231, -232, and -233 airplanes; and Model A321- 111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2017- 22-07 required repetitive inspections of the frame forks, and corrective actions if necessary. AD 2017-22-07 also included optional modifications that constituted terminating action. This AD requires modifying certain forward and aft cargo compartment doors, and related investigative and corrective actions. This AD was prompted by an evaluation done by the design approval holder indicating that certain areas of certain cargo compartment doors are subject to widespread fatigue damage, and a determination was made that a modification of the frame forks must be done. We are issuing this AD to address the unsafe condition on these products.
Special Conditions: Innovative Solutions & Support, Inc.; Textron Aviation, Inc. Model B200-Series Airplanes; Autothrust Functions
These special conditions are issued for Textron Aviation, Inc. B200-series airplanes. These airplanes as modified by Innovative Solutions & Support, Inc., will have a novel or unusual design feature associated with an autothrust system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Notice of Public Workshops for the Draft Written Re-Evaluation of the O'Hare Modernization Environmental Impact Statement for the Interim Fly Quiet Runway Rotation Plan
The Federal Aviation Administration (FAA) announces its intent to host Public Workshops for the Draft Written Re-Evaluation of the O'Hare Modernization Environmental Impact Statement (Draft Re- Evaluation) for the Interim Fly Quiet Runway Rotation Plan for Chicago O'Hare International Airport, Chicago, Illinois. The Draft Re-Evaluation will identify the potential environmental impacts associated with the Proposed Interim Fly Quiet at O'Hare International Airport pursuant to the National Environmental Policy Act. The FAA will host Public Workshops on the Draft Re-Evaluation. The Public Workshops on the Draft Re-Evaluation will be held on the following dates: Monday, February 4, 2019, at Belvedere Events and Banquets, 1170 West Devon Avenue, Elk Grove Village, Illinois 60007; Tuesday, February 5, 2019, at White Eagle Banquets, 6839 North Milwaukee Avenue, Niles, Illinois 60714; Wednesday, February 6, 2019, at Hanging Gardens Banquet Rooms, 8301 West Belmont Avenue, River Grove, Illinois 60171; and Thursday, February 7, 2019, at The Diplomat West, 681 West North Avenue, Elmhurst, Illinois 60126. Each Public Workshop will start at 2 p.m. (Central Standard Time), and registration to participate in the Public Workshops will conclude by 8 p.m. (Central Standard Time). Representatives of FAA and its consultants will be available to provide information about the Draft Re-Evaluation. Spanish language translators will be available at the Public Workshops. If you need the assistance of a translator, other than Spanish, please call Ms. Amy Hanson at (847) 294-7354 by January 18, 2019. The Draft Re-Evaluation will be available for review on line at (https://www.faa.gov/airports/airport_evelopment/omp/ifq_re_ev al/) and at libraries around O'Hare International Airport. The FAA will issue a separate notice at the time the Draft Re-Evaluation is available.
Proposed Modification of the Miami, FL, Class B Airspace; and the Fort Lauderdale, FL, Class C Airspace Areas; Public Meeting
This notice announces a fact-finding informal airspace meeting regarding a plan to modify the Miami, FL, Class B Airspace, and the Fort Lauderdale, FL, Class C Airspace areas. The purpose of the meeting is to provide interested parties an opportunity to present views, recommendations, and comments on any proposed change to the airspace. All comments received during the meeting will be considered prior to any revision or issuance of a notice of proposed rulemaking.
Petition for Exemption; Summary of Petition Received; Southwest Airlines Company
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; The Boeing Company
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Department of the Air Force
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Engine Alliance Turbofan Engines
We are adopting a new airworthiness directive (AD) for all Engine Alliance (EA) GP7270, GP7272, and GP7277 model turbofan engines. This AD requires inspection of the stage 6 seal ring for correct installation and inspection of the high-pressure compressor (HPC) stages 2-5 spool for cracks. This AD also requires replacement of the HPC stages 2-5 spool if the stage 6 seal ring is incorrectly installed or if the HPC stages 2-5 spool is found cracked. This AD was prompted by a shop finding of axial cracks in the interstage 5-6 seal teeth of the HPC stages 2-5 spool spacer arm, due to an incorrectly installed stage 6 seal ring. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 757-200 series airplanes. This AD was prompted by reports of uncommanded movement of the captain's and first officer's seats. This AD requires, for the captain's and first officer's seats, repetitive horizontal actuator identifications, repetitive checks of the horizontal movement system (HMS), a detailed inspection of the HMS, as applicable, and applicable on-condition actions. This AD also requires a general visual inspection to determine the seat part numbers of the captain's and first officer's seats, a cable adjustment check on seats with certain seat part numbers, and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; CFM International S.A. Turbofan Engines
We are superseding Airworthiness Directive (AD) 2018-18-01 for all CFM International S.A. (CFM) Model CFM56-7B turbofan engines. AD 2018-18-01 required initial and repetitive inspections of certain fan blades and, if they fail the inspection, their replacement with parts eligible for installation. This AD requires the same initial and repetitive inspections but revises the compliance time for the initial inspections and revises the installation prohibition based on the updated compliance time. This AD was prompted by further analysis by the manufacturer that indicated a need to reduce the initial fan blade inspection interval based on an ongoing root cause investigation of an April 2018 engine failure. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 777 airplanes. This proposed AD was prompted by reports of uncommanded movements of the Captain's and First Officer's seats. This proposed AD would require an identification of the part number, and if applicable the serial number, of the Captain's and First Officer's seats, and do applicable on-condition actions for affected seats. This proposed AD would also require a one-time detailed inspection and repetitive checks of the horizontal movement system of the Captain's and First Officer's seats and applicable on-condition actions. This proposed AD would also provide an optional terminating action for the repetitive checks of the horizontal movement system. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
We propose to adopt a new airworthiness directive (AD) for Pilatus Aircraft Ltd. Model PC-6, PC-6/350, PC-6/350-H1, PC-6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/ B2-H4, PC-6/C-H2, PC-6/C1-H2, PC-6-H1, and PC-6-H2 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as sheared or missing rivets on the horizontal stabilizer hinge bracket assemblies. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes. This proposed AD was prompted by reports of uncommanded movements of the Captain's and First Officer's seats. This proposed AD would require an identification of the part number, and if applicable the serial number, of the Captain's and First Officer's seats, and applicable on-condition actions. This proposed AD would also require a one-time detailed inspection and repetitive checks of the horizontal movement system of the Captain's and First Officer's seats, and applicable on-condition actions. This proposed AD would also provide an optional terminating action for the repetitive checks of the horizontal movement system for certain airplanes. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Zodiac Aero Evacuation Systems (Also Known as Air Cruisers Company) Airplanes
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to Zodiac Aero Evacuation Systems (also known as Air Cruisers Company) fusible plugs installed on emergency evacuation equipment for various transport category airplanes. As published, the email address for requesting service information specified in the preamble and regulatory text is incorrect. This document corrects that error. In all other respects, the original document remains the same.
Special Conditions: Airbus Model A330-200, A330-200F, A330-300 and A330-900 Series Airplanes; Electronic System Security Protection From Unauthorized Internal Access
These special conditions are issued for the Airbus Model A330- 200, A330-200F, A330-300, and A330-900 series airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is airplane electronic systems and networks that allow access, from aircraft internal sources (e.g., wireless devices, internet connectivity), to the airplane's previously isolated, internal, electronic components. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Airbus Model A330-200, A330-200F, A330-300 and A330-900 Series Airplanes; Electronic System Security Protection From Unauthorized External Access
These special conditions are issued for the Airbus Model A330- 200, A330-200F, A330-300, and A330-900 series airplanes. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is airplane electronic systems and networks that allow access from external sources (e.g., wireless devices, internet connectivity) to the airplane's internal electronic components. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Airbus Helicopters (Previously Eurocopter France) Helicopters
We are superseding Airworthiness Directive (AD) 2016-25-19 for Airbus Helicopters (previously Eurocopter France) Model AS350B3 and EC130B4 helicopters. AD 2016-25-19 required inspecting the pilot's and co-pilot's throttle twist for proper operation. This new AD retains the requirements of AD 2016-25-19 and adds certain model helicopters to the applicability. The actions of this AD are intended to address an unsafe condition on these products.
Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters
We are revising an earlier proposal for Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters. This action revises the notice of proposed rulemaking (NPRM) by increasing the estimated costs of compliance and removing the daily inspection requirements. We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional economic burden over that proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on this change.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Establishment of Class E Airspace; Glen Ullin, ND
This action corrects a final rule published in the Federal Register of September 26, 2018, that established Class E airspace extending upward from 700 feet above the surface at Glen Ullin Regional Airport, Glen Ullin, ND. The state identifier ``WI'' was inadvertently, included in the header of the legal description instead of ``ND''.
Airworthiness Directives; Piper Aircraft, Inc. Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Piper Aircraft, Inc. (Piper) Model PA-28-140, PA-28-150, PA-28- 151, PA-28-160, PA-28-161, PA-28-180, PA-28-181, PA-28-235, PA-28R-180, PA-28R-200, PA-28R-201, PA-28R-201T, PA-28RT-201, PA-28RT-201T, PA-32- 260, and PA-32-300 airplanes. This proposed AD was prompted by a report of a fatigue crack found in a visually inaccessible area of the lower main wing spar cap. This proposed AD would require calculating the factored service hours for each main wing spar to determine when an inspection is required, inspecting the lower main wing spar bolt holes for cracks, and replacing any cracked main wing spar. We are proposing this AD to address the unsafe condition on these products.
Primary Category Airworthiness Design Standards; Vertical Aviation Technologies (VAT) Model S-52L Rotorcraft
These airworthiness design standards are issued to Vertical Aviation Technologies (VAT) for certification of the Model S-52L rotorcraft under the regulations for primary category aircraft.
Establishment of Class E Airspace; Maurice, IA
This action establishes Class E airspace extending upward from 700 feet above the surface at Sioux County Regional Airport, Maurice, IA. Controlled airspace is necessary to accommodate new standard instrument approach procedures developed at Sioux County Regional Airport, for the safety and management of instrument flight rules (IFR) operations at this airport.
Use of Automatic Dependent Surveillance-Broadcast (ADS-B) Out in Support of Reduced Vertical Separation Minimum (RVSM) Operations
This action revises the FAA's requirements for application to operate in RVSM airspace. The amendment eliminates the requirement for operators to apply for an RVSM authorization when their aircraft are equipped with qualified ADS-B Out systems and meet specific altitude keeping equipment requirements for operations in RVSM airspace. This action recognizes the enhancements in aircraft monitoring resulting from the use of ADS-B Out systems and responds to requests from operators to eliminate the burden and expense of the current RVSM application process for aircraft equipped with qualified ADS-B Out systems.
Solicitation of Nominations for Appointment to the Drone Advisory Committee (DAC)
The FAA is issuing this notice to solicit nominations for qualified candidates to serve on the DAC. This notice seeks to fill vacancies on the DAC and does not affect the status of current DAC members. The DAC is an advisory committee established under DOT's authority, in accordance with the provisions of the Federal Advisory Committee Act (FACA) as amended. The objective of the DAC is to provide independent advice and recommendations to the FAA and to respond to specific taskings received directly from the FAA. The advice, recommendations, and taskings relate to improving the efficiency and safety of integrating Unmanned Aircraft Systems (UAS) into the National Airspace System. In response to FAA requests, the DAC may provide the FAA with information that may be used for tactical and strategic planning purposes.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Air Carrier Contract Maintenance Requirements
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. This information collection requires air carriers to report monthly to the FAA, all maintenance providers with whom they have contracted with to perform maintenance on their aircraft. This is necessary to ensure that maintenance provider data is current, and in a format readily accessible to the FAA. This will enable the FAA to adequately target its inspection resources for surveillance, and make accurate risk assessments.
Removal of Training Requirements for an Airline Transport Pilot Certificate Issued Concurrently With a Single-Engine Airplane Type Rating
This notice of proposed rulemaking (NPRM) would remove an unnecessary multiengine training requirement for pilots seeking to obtain an initial airline transport pilot (ATP) certificate concurrently with a single-engine airplane type rating. This action also proposes to revise several pilot certification regulations by removing the July 31, 2014 date, which served as the compliance date for the multiengine ATP training requirements, because the date is no longer necessary.
Proposed Establishment of Class E Airspace; Coushatta, LA
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at The Red River Airport, Coushatta, LA. Controlled airspace is necessary to accommodate new standard instrument approach procedures developed at The Red River Airport, for the safety and management of instrument flight rules (IFR) operations.
Establishment of Class E Airspace; Hardinsburg, KY
This action establishes Class E airspace extending upward from 700 feet above the surface at Breckinridge County Airport, Hardinsburg, KY, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures serving the airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.