Department of Transportation November 2018 – Federal Register Recent Federal Regulation Documents

This action modifies Class E airspace extending up to 700 feet above the surface at Lac Qui Parle County Airport, Madison, MN, to accommodate new standard instrument approach procedures for instrument flight rules (IFR) operations at the airport. The FAA is taking this action due to the decommissioning of the Madison non-directional radio beacon (NDB) and cancellation of the associated approach. This enhances the safety and management of IFR operations at the airport.

This action establishes Class E surface airspace at Dothan Regional Airport, Dothan, AL. The Class E surface airspace is established for the safety of aircraft landing and departing the airport when the air traffic control tower is closed. Also, this action amends Class D airspace by updating the airport's name and geographic coordinates, as well as replacing the outdated term `Airport/Facility Directory' with `Chart Supplement'. Additionally, the geographic coordinates of the airport and Wiregrass VORTAC are adjusted in the associated Class E airspace to match the FAA's aeronautical database; as well as removing the part-time status of the airspace for Class E airspace designated as an extension to a Class D surface area. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

We propose to adopt a new airworthiness directive (AD) for MDHI Model 369A, 369D, 369E, 369FF, 369H, 369HE, 369HM, 369HS, 500N, and 600N helicopters. This proposed AD would require inspecting each main rotor blade (MRB) for a crack. This proposed AD is prompted by reports of cracked MRBs. The actions of this proposed AD are intended to address an unsafe condition on these helicopters.

We are removing Airworthiness Directive (AD) 93-14-19, which applied to certain The Boeing Company Model 767-200 and -300 series airplanes. AD 93-14-19 required inspections for disbonding of the trailing edge wedge of the leading edge slat; and repair, if necessary. We issued AD 93-14-19 to prevent the loss of a trailing edge wedge, which could result in reduced maneuver margins, reduced speed margins to stall, and unexpected roll before stall warning, all of which would adversely affect the controllability of the airplane. Since we issued AD 93-14-19, an updated stability and control analysis showed that the worst-case scenario of a trailing edge wedge disbond in-flight would not adversely affect the controllability of the airplane. Accordingly, AD 93-14-19 is removed.

In response to a request from the public, NHTSA is announcing a two-week extension of the comment period on the ANPRM on a Pilot Program for Collaborative Research on Motor Vehicles with High or Full Driving Automation. The comment period for the ANPRM was originally scheduled to end on November 26, 2018. It will now end on December 10, 2018.

FMCSA announces its decision to renew exemptions for five individuals from the requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) that interstate commercial motor vehicle (CMV) drivers have ``no established medical history or clinical diagnosis of epilepsy or any other condition which is likely to cause loss of consciousness or any loss of ability to control a CMV.'' The exemptions enable these individuals who have had one or more seizures and are taking anti-seizure medication to continue to operate CMVs in interstate commerce.

In accordance with the Paperwork Reduction Act of 1995, PHMSA invites comments on this information collection pertaining to hazardous materials transportation for which PHMSA intends to request renewal from the Office of Management and Budget.

We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200 Freighter series airplanes, Model A330-200 and -300 series airplanes, and Model A340-200 and -300 series airplanes. This AD was prompted by defects found during production tests of ram air turbine (RAT) units; investigation revealed that the defects were due to certain RAT hydraulic pumps having an alternative manufacturing process of the pump pistons. This AD requires replacing any defective RAT hydraulic pump with a serviceable part and re- identifying the RAT module part number. We are issuing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain Dassault Aviation Model FAN JET FALCON, and FAN JET FALCON SERIES C, D, E, F, and G airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations and maintenance requirements are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations and maintenance requirements. We are proposing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A318 and A319 series airplanes; Model A320-211, A320- 212, A320-214, A320-216, A320-231, A320-232, and A320-233 airplanes; and Model A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, and A321-232 airplanes. This AD was prompted by reports of missing assembly hardware on the trimmable horizontal stabilizer actuator (THSA). This AD requires repetitive inspections and checks of the lower and upper THSA attachments and applicable related investigative and corrective actions; a one-time inspection of the THSA lower attachment and replacement as applicable; and, for certain airplanes, activation of the electrical load sensing device (ELSD) and concurrent modifications. We are issuing this AD to address the unsafe condition on these products.

This notice announces a meeting of the Department of Transportation Advisory Committee on Human Trafficking.

These special conditions are issued for the Textron Aviation Inc. (Textron) Model 560XL, formerly known as, prior to July 29, 2015, the Cessna Model 560XL. This airplane, as modified by Garmin International (Garmin), will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is Garmin G5000 avionics that allow internal connection to previously isolated data networks, which are connected to systems that perform functions required for the safe operation of the airplane. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on July 31, 2018. The collection involves FAA Form 5280-1, Application for Airport Operating Certificate. Every airport that wants to become a certificated airport must complete this form, as well as provide a draft Airport Certification Manual (ACM). In addition, currently certificated airports must maintain their ACM, as well as keep and maintain records related to training, self-inspection, and other requirements. These records allow the FAA to verify compliance with regulation safety and operational requirements to ensure that the airports meet the minimum safety requirements, which in turn enhances the safety of the flying public.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 19, 2018. Airworthiness Directives are regulations issued to require corrective action to resolve an unsafe condition in aircraft, engines, propellers, and appliances. Reports of inspections are often needed when emergency corrective action is taken to determine if the action was adequate to correct the unsafe condition. The respondents are aircraft owners and operators.

This action establishes Class E surface airspace at Tyndall Air Force Base, (AFB), FL, for the safety of aircraft landing and departing the airport when the air traffic control tower is closed. Also, this action amends Class D airspace by updating the geographic coordinates of this airport, as well as replacing the outdated term ``Airport/Facility Directory'' with ``Chart Supplement''. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), Council on Environmental Quality NEPA implementing regulations, and Federal Aviation Administration (FAA) Order 1050.1F, Environmental Impacts: Policies and Procedures, the FAA is announcing the availability of the Final Environmental Assessment and Finding of No Significant Impact/Record of Decision for the Shuttle Landing Facility (SLF) Launch Site Operator License (Final EA and FONSI/ROD).

PHMSA is issuing an emergency waiver order to persons conducting operations under the direction of Environmental Protection Agency (EPA) Region 9 or United States Coast Guard (USCG) Eleventh District within the California Wildfire emergency area. The Waiver is granted to support the EPA and USCG in taking appropriate actions to prepare for, respond to, and recover from a threat to public health, welfare, or the environment caused by actual or potential oil and hazardous materials incidents resulting from the California Wildfires. This Waiver Order is effective immediately and shall remain in effect for 30 days from the date of issuance.

The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to certain Bombardier, Inc., Model DHC-8-300 series airplanes. As published, a service information citation is incorrect. This document corrects the error. In all other respects, the original document remains the same.

We propose to adopt a new airworthiness directive (AD) for Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model MBB-BK 117 C-2 helicopters. This proposed AD would require establishing or reducing the life limit of various parts. This proposed AD is prompted by recalculations. The actions of this proposed AD are intended to address an unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain Pratt & Whitney Division (PW) PW4158 turbofan engines. This proposed AD was prompted by several reports of high cycle fatigue (HCF) cracks found in the fuel nozzle supply manifold. This proposed AD would require replacement of the affected fuel nozzles and fuel nozzle manifold supply assemblies with parts eligible for installation. This proposed AD would also require installation of new brackets and clamps on the fuel supply manifold assemblies. We are proposing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on October 9, 2018. The collection involves return to the Civil Aviation Aircraft Registry of information relating to the release of a lien that has been recorded with the Registry. Regulations provide for establishing and maintaining a system for the recording of security conveyances affecting title to, or interest in U.S. civil aircraft, as well as certain specifically identified engines, propellers, or spare parts locations, and for recording of releases relating to those conveyances. Federal Aviation Regulations establish procedures for implementation. Regulations describe what information must be contained in a security conveyance in order for it to be recorded with FAA. The convention on the International Recognition signatory, prevents, by treaty, the export of an aircraft and cancellation of its nationality marks if there is an outstanding lien recorded. The Civil Aviation Registry must have consent or release of lien from the lienholder prior to confirmation/cancellation for export.

The Regulatory and Deregulatory Agenda is a semiannual summary of all current and projected rulemakings, reviews of existing regulations, and completed actions of the Department. The intent of the Agenda is to provide the public with information about the Department of Transportation's regulatory activity planned for the next 12 months. It is expected that this information will enable the public to more effectively participate in the Department's regulatory process. The public is also invited to submit comments on any aspect of this Agenda.