Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters, 58191-58193 [2018-24995]
Download as PDF
58191
Proposed Rules
Federal Register
Vol. 83, No. 223
Monday, November 19, 2018
This section of the FEDERAL REGISTER
contains notices to the public of the proposed
issuance of rules and regulations. The
purpose of these notices is to give interested
persons an opportunity to participate in the
rule making prior to the adoption of the final
rules.
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA–2018–0980; Product
Identifier 2017–SW–123–AD]
RIN 2120–AA64
Airworthiness Directives; Airbus
Helicopters Deutschland GmbH
Helicopters
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking
(NPRM).
AGENCY:
We propose to adopt a new
airworthiness directive (AD) for Airbus
Helicopters Deutschland GmbH (Airbus
Helicopters) Model MBB–BK 117 C–2
helicopters. This proposed AD would
require establishing or reducing the life
limit of various parts. This proposed AD
is prompted by recalculations. The
actions of this proposed AD are
intended to address an unsafe condition
on these products.
DATES: We must receive comments on
this proposed AD by January 18, 2019.
ADDRESSES: You may send comments by
any of the following methods:
• Federal eRulemaking Docket: Go to
https://www.regulations.gov. Follow the
online instructions for sending your
comments electronically.
• Fax: 202–493–2251.
• Mail: Send comments to the U.S.
Department of Transportation, Docket
Operations, M–30, West Building
Ground Floor, Room W12–140, 1200
New Jersey Avenue SE, Washington, DC
20590–0001.
• Hand Delivery: Deliver to the
‘‘Mail’’ address between 9 a.m. and 5
p.m., Monday through Friday, except
Federal holidays.
khammond on DSK30JT082PROD with PROPOSAL
SUMMARY:
Examining the AD Docket
You may examine the AD docket on
the internet at https://
www.regulations.gov by searching for
and locating Docket No. FAA–2018–
VerDate Sep<11>2014
16:52 Nov 16, 2018
Jkt 247001
0980; or in person at Docket Operations
between 9 a.m. and 5 p.m., Monday
through Friday, except Federal holidays.
The AD docket contains this proposed
AD, the European Aviation Safety
Agency (EASA) AD, the economic
evaluation, any comments received, and
other information. The street address for
Docket Operations (telephone 800–647–
5527) is in the ADDRESSES section.
Comments will be available in the AD
docket shortly after receipt.
For service information identified in
this proposed rule, contact Airbus
Helicopters, 2701 N Forum Drive, Grand
Prairie, TX 75052; telephone (972) 641–
0000 or (800) 232–0323; fax (972) 641–
3775; or at https://
www.helicopters.airbus.com/website/
en/ref/Technical-Support_73.html. You
may review the referenced service
information at the FAA, Office of the
Regional Counsel, Southwest Region,
10101 Hillwood Pkwy., Room 6N–321,
Fort Worth, TX 76177.
FOR FURTHER INFORMATION CONTACT: Matt
Fuller, Senior Aviation Safety Engineer,
Safety Management Section, Rotorcraft
Standards Branch, FAA, 10101
Hillwood Pkwy., Fort Worth, TX 76177;
telephone (817) 222–5110; email
matthew.fuller@faa.gov.
SUPPLEMENTARY INFORMATION:
Comments Invited
We invite you to participate in this
rulemaking by submitting written
comments, data, or views. We also
invite comments relating to the
economic, environmental, energy, or
federalism impacts that might result
from adopting the proposals in this
document. The most helpful comments
reference a specific portion of the
proposal, explain the reason for any
recommended change, and include
supporting data. To ensure the docket
does not contain duplicate comments,
commenters should send only one copy
of written comments, or if comments are
filed electronically, commenters should
submit only one time.
We will file in the docket all
comments that we receive, as well as a
report summarizing each substantive
public contact with FAA personnel
concerning this proposed rulemaking.
Before acting on this proposal, we will
consider all comments we receive on or
before the closing date for comments.
We will consider comments filed after
the comment period has closed if it is
PO 00000
Frm 00001
Fmt 4702
Sfmt 4702
possible to do so without incurring
expense or delay. We may change this
proposal in light of the comments we
receive.
Discussion
EASA, which is the Technical Agent
for the Member States of the European
Union, has issued EASA AD No. 2017–
0174, dated September 12, 2017 (EASA
AD 2017–0174), to correct an unsafe
condition for Airbus Helicopters Model
MBB–BK 117 C–2 helicopters. EASA
advises that recalculation by Airbus
Helicopters has resulted in new or
reduced life limits for certain parts.
EASA AD 2017–0174 states the life
limits are mandatory for continued
airworthiness and failing to replace lifelimited parts as specified could result in
an unsafe condition. To address this
condition, EASA AD 2017–0174
requires replacing the affected parts
before exceeding their new or reduced
life limit.
FAA’s Determination
These helicopters have been approved
by the aviation authority of Germany
and are approved for operation in the
United States. Pursuant to our bilateral
agreement with Germany, EASA, its
technical representative, has notified us
of the unsafe condition described in its
AD. We are proposing this AD because
we evaluated all known relevant
information and determined that an
unsafe condition is likely to exist or
develop on other products of the same
type design.
Related Service Information
We reviewed Airbus Helicopters Alert
Service Bulletin ASB MBB–BK117 C–2–
04A–008, Revision 0, dated April 27,
2017, for Model MBB–BK 117 C–2 and
C–2e helicopters. This service
information specifies entering into the
helicopter records the reduced and new
airworthiness life limits for certain partnumbered main rotor head, swash plate,
rotor flight controls, cyclic controls, and
upper controls parts.
Proposed AD Requirements
This proposed AD would require
establishing and reducing the life limit
of the following parts: Main rotor
head—nut, upper and lower quadruple
nut, bolts, and inner sleeve; swash plate
control ring assembly; rotor flight
control collective bellcrank-K; cyclic
E:\FR\FM\19NOP1.SGM
19NOP1
58192
Federal Register / Vol. 83, No. 223 / Monday, November 19, 2018 / Proposed Rules
control rod tube; and upper control
forked lever.
Costs of Compliance
We estimate that this proposed AD
would affect 128 helicopters of U.S.
Registry. We estimate that operators
may incur the following costs in order
to comply with this AD. Labor costs are
estimated at $85 per work-hour.
Replacing a nut would take about 5
work-hours and parts would cost about
$3,352 for an estimated replacement
cost of $3,777.
Replacing a quadruple nut upper
would take about 5 work-hours and
parts would cost about $3,283 for an
estimated replacement cost of $3,708.
Replacing a quadruple nut lower
would take about 5 work-hours and
parts would cost about $3,405 for an
estimated replacement cost of $3,830.
Replacing a bolt would take about 2
work-hours and parts would cost about
$370 for an estimated replacement cost
of $540.
Replacing an inner sleeve would take
about 2 work-hours and parts would
cost about $20,073 for an estimated
replacement cost of $20,243.
Replacing a control ring assembly
would take about 5 work-hours and
parts would cost about $11,141 for an
estimated replacement cost of $11,566.
Replacing a bellcrank-K (collective)
would take about 4 work-hours and
parts would cost about $3,400 for an
estimated replacement cost of $3,740.
Replacing a control rod tube would
take about 4 work-hours and parts
would cost about $1,084 for an
estimated replacement cost of $1,424.
Replacing a forked lever would take
about 3 work-hours and parts would
cost about $6,049 for an estimated
replacement cost of $6,304.
Authority for This Rulemaking
khammond on DSK30JT082PROD with PROPOSAL
Title 49 of the United States Code
specifies the FAA’s authority to issue
rules on aviation safety. Subtitle I,
section 106, describes the authority of
the FAA Administrator. ‘‘Subtitle VII:
Aviation Programs,’’ describes in more
detail the scope of the Agency’s
authority.
VerDate Sep<11>2014
16:52 Nov 16, 2018
Jkt 247001
We are issuing this rulemaking under
the authority described in ‘‘Subtitle VII,
Part A, Subpart III, Section 44701:
General requirements.’’ Under that
section, Congress charges the FAA with
promoting safe flight of civil aircraft in
air commerce by prescribing regulations
for practices, methods, and procedures
the Administrator finds necessary for
safety in air commerce. This regulation
is within the scope of that authority
because it addresses an unsafe condition
that is likely to exist or develop on
products identified in this rulemaking
action.
Regulatory Findings
We determined that this proposed AD
would not have federalism implications
under Executive Order 13132. This
proposed AD would not have a
substantial direct effect on the States, on
the relationship between the national
Government and the States, or on the
distribution of power and
responsibilities among the various
levels of government.
For the reasons discussed, I certify
this proposed regulation:
1. Is not a ‘‘significant regulatory
action’’ under Executive Order 12866;
2. Is not a ‘‘significant rule’’ under the
DOT Regulatory Policies and Procedures
(44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in
Alaska to the extent that it justifies
making a regulatory distinction; and
4. Will not have a significant
economic impact, positive or negative,
on a substantial number of small entities
under the criteria of the Regulatory
Flexibility Act.
We prepared an economic evaluation
of the estimated costs to comply with
this proposed AD and placed it in the
AD docket.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation
safety, Incorporation by reference,
Safety.
The Proposed Amendment
Accordingly, under the authority
delegated to me by the Administrator,
PO 00000
Frm 00002
Fmt 4702
Sfmt 4702
the FAA proposes to amend 14 CFR part
39 as follows:
PART 39—AIRWORTHINESS
DIRECTIVES
1. The authority citation for part 39
continues to read as follows:
■
Authority: 49 U.S.C. 106(g), 40113, 44701.
§ 39.13
[Amended]
2. The FAA amends § 39.13 by adding
the following new airworthiness
directive (AD):
■
Airbus Helicopters Deutschland GmbH:
Docket No. FAA–2018–0980; Product
Identifier 2017–SW–123–AD.
(a) Applicability
This AD applies to Airbus Helicopters
Deutschland GmbH Model MBB–BK 117 C–
2 helicopters with a part listed in Table 1 to
paragraph (e) of this AD installed, certificated
in any category.
Note 1 to paragraph (a) of this AD:
Helicopters with an MBB–BK117 C–2e
designation are Model MBB–BK117 C–2
helicopters.
(b) Unsafe Condition
This AD defines the unsafe condition as a
part remaining in service beyond its fatigue
life. This condition could result in failure of
a part and loss of control of the helicopter.
(c) Comments Due Date
We must receive comments by January 18,
2019.
(d) Compliance
You are responsible for performing each
action required by this AD within the
specified compliance time unless it has
already been accomplished prior to that time.
(e) Required Actions
Before further flight, remove from service
any part that has reached or exceeded its new
or reduced life limit as listed in Table 1 to
paragraph (e) of this AD. Thereafter, remove
from service each part on or before reaching
its new or reduced life limit as listed in Table
1 to paragraph (e) of this AD. For purposes
of this AD, a ‘‘landing’’ is counted any time
the helicopter lifts off into the air and then
lands again regardless of the duration of the
landing and regardless of whether the engine
is shut down.
BILLING CODE 4910–13–P
E:\FR\FM\19NOP1.SGM
19NOP1
Federal Register / Vol. 83, No. 223 / Monday, November 19, 2018 / Proposed Rules
operating any aircraft complying with this
AD through an AMOC.
khammond on DSK30JT082PROD with PROPOSAL
(f) Alternative Methods of Compliance
(AMOCs)
(g) Additional Information
(1) The Manager, Safety Management
Section, Rotorcraft Standards Branch, FAA,
may approve AMOCs for this AD. Send your
proposal to: Matt Fuller, Senior Aviation
Safety Engineer, Safety Management Section,
Rotorcraft Standards Branch, FAA, 10101
Hillwood Pkwy., Fort Worth, TX 76177;
telephone (817) 222–5110; email 9-ASWFTW-AMOC-Requests@faa.gov.
(2) For operations conducted under a 14
CFR part 119 operating certificate or under
14 CFR part 91, subpart K, we suggest that
you notify your principal inspector, or
lacking a principal inspector, the manager of
the local flight standards district office or
certificate holding district office before
VerDate Sep<11>2014
16:52 Nov 16, 2018
Jkt 247001
(1) Airbus Helicopters Alert Service
Bulletin ASB MBB–BK117 C–2–04A–008,
Revision 0, dated April 27, 2017, which is
not incorporated by reference, contains
additional information about the subject of
this AD. For service information identified in
this AD, contact Airbus Helicopters, 2701 N
Forum Drive, Grand Prairie, TX 75052;
telephone (972) 641–0000 or (800) 232–0323;
fax (972) 641–3775; or at https://
www.helicopters.airbus.com/website/en/ref/
Technical-Support_73.html. You may review
the referenced service information at the
FAA, Office of the Regional Counsel,
Southwest Region, 10101 Hillwood Pkwy.,
Room 6N–321, Fort Worth, TX 76177.
PO 00000
Frm 00003
Fmt 4702
Sfmt 4702
(2) The subject of this AD is addressed in
European Aviation Safety Agency (EASA) AD
No. 2017–0174, dated September 12, 2017.
You may view the EASA AD on the internet
at https://www.regulations.gov in the AD
Docket.
(h) Subject
Joint Aircraft Service Component (JASC)
Code: 6220, Main Rotor Head; 6230 Main
Rotor Mast/Swashplate; and 6710, Main
Rotor Control.
Issued in Fort Worth, Texas, on November
6, 2018.
James A. Grigg,
Acting Director, Compliance & Airworthiness
Division, Aircraft Certification Service.
[FR Doc. 2018–24995 Filed 11–16–18; 8:45 am]
BILLING CODE 4910–13–P
E:\FR\FM\19NOP1.SGM
19NOP1
EP19NO18.001
BILLING CODE 4910–13–C
58193
Agencies
[Federal Register Volume 83, Number 223 (Monday, November 19, 2018)]
[Proposed Rules]
[Pages 58191-58193]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-24995]
========================================================================
Proposed Rules
Federal Register
________________________________________________________________________
This section of the FEDERAL REGISTER contains notices to the public of
the proposed issuance of rules and regulations. The purpose of these
notices is to give interested persons an opportunity to participate in
the rule making prior to the adoption of the final rules.
========================================================================
Federal Register / Vol. 83, No. 223 / Monday, November 19, 2018 /
Proposed Rules
[[Page 58191]]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2018-0980; Product Identifier 2017-SW-123-AD]
RIN 2120-AA64
Airworthiness Directives; Airbus Helicopters Deutschland GmbH
Helicopters
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: We propose to adopt a new airworthiness directive (AD) for
Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model MBB-BK
117 C-2 helicopters. This proposed AD would require establishing or
reducing the life limit of various parts. This proposed AD is prompted
by recalculations. The actions of this proposed AD are intended to
address an unsafe condition on these products.
DATES: We must receive comments on this proposed AD by January 18,
2019.
ADDRESSES: You may send comments by any of the following methods:
Federal eRulemaking Docket: Go to https://www.regulations.gov. Follow the online instructions for sending your
comments electronically.
Fax: 202-493-2251.
Mail: Send comments to the U.S. Department of
Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590-0001.
Hand Delivery: Deliver to the ``Mail'' address between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Examining the AD Docket
You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2018-
0980; or in person at Docket Operations between 9 a.m. and 5 p.m.,
Monday through Friday, except Federal holidays. The AD docket contains
this proposed AD, the European Aviation Safety Agency (EASA) AD, the
economic evaluation, any comments received, and other information. The
street address for Docket Operations (telephone 800-647-5527) is in the
ADDRESSES section. Comments will be available in the AD docket shortly
after receipt.
For service information identified in this proposed rule, contact
Airbus Helicopters, 2701 N Forum Drive, Grand Prairie, TX 75052;
telephone (972) 641-0000 or (800) 232-0323; fax (972) 641-3775; or at
https://www.helicopters.airbus.com/website/en/ref/Technical-Support_73.html. You may review the referenced service information at
the FAA, Office of the Regional Counsel, Southwest Region, 10101
Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177.
FOR FURTHER INFORMATION CONTACT: Matt Fuller, Senior Aviation Safety
Engineer, Safety Management Section, Rotorcraft Standards Branch, FAA,
10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-5110;
email [email protected].
SUPPLEMENTARY INFORMATION:
Comments Invited
We invite you to participate in this rulemaking by submitting
written comments, data, or views. We also invite comments relating to
the economic, environmental, energy, or federalism impacts that might
result from adopting the proposals in this document. The most helpful
comments reference a specific portion of the proposal, explain the
reason for any recommended change, and include supporting data. To
ensure the docket does not contain duplicate comments, commenters
should send only one copy of written comments, or if comments are filed
electronically, commenters should submit only one time.
We will file in the docket all comments that we receive, as well as
a report summarizing each substantive public contact with FAA personnel
concerning this proposed rulemaking. Before acting on this proposal, we
will consider all comments we receive on or before the closing date for
comments. We will consider comments filed after the comment period has
closed if it is possible to do so without incurring expense or delay.
We may change this proposal in light of the comments we receive.
Discussion
EASA, which is the Technical Agent for the Member States of the
European Union, has issued EASA AD No. 2017-0174, dated September 12,
2017 (EASA AD 2017-0174), to correct an unsafe condition for Airbus
Helicopters Model MBB-BK 117 C-2 helicopters. EASA advises that
recalculation by Airbus Helicopters has resulted in new or reduced life
limits for certain parts. EASA AD 2017-0174 states the life limits are
mandatory for continued airworthiness and failing to replace life-
limited parts as specified could result in an unsafe condition. To
address this condition, EASA AD 2017-0174 requires replacing the
affected parts before exceeding their new or reduced life limit.
FAA's Determination
These helicopters have been approved by the aviation authority of
Germany and are approved for operation in the United States. Pursuant
to our bilateral agreement with Germany, EASA, its technical
representative, has notified us of the unsafe condition described in
its AD. We are proposing this AD because we evaluated all known
relevant information and determined that an unsafe condition is likely
to exist or develop on other products of the same type design.
Related Service Information
We reviewed Airbus Helicopters Alert Service Bulletin ASB MBB-BK117
C-2-04A-008, Revision 0, dated April 27, 2017, for Model MBB-BK 117 C-2
and C-2e helicopters. This service information specifies entering into
the helicopter records the reduced and new airworthiness life limits
for certain part-numbered main rotor head, swash plate, rotor flight
controls, cyclic controls, and upper controls parts.
Proposed AD Requirements
This proposed AD would require establishing and reducing the life
limit of the following parts: Main rotor head--nut, upper and lower
quadruple nut, bolts, and inner sleeve; swash plate control ring
assembly; rotor flight control collective bellcrank-K; cyclic
[[Page 58192]]
control rod tube; and upper control forked lever.
Costs of Compliance
We estimate that this proposed AD would affect 128 helicopters of
U.S. Registry. We estimate that operators may incur the following costs
in order to comply with this AD. Labor costs are estimated at $85 per
work-hour.
Replacing a nut would take about 5 work-hours and parts would cost
about $3,352 for an estimated replacement cost of $3,777.
Replacing a quadruple nut upper would take about 5 work-hours and
parts would cost about $3,283 for an estimated replacement cost of
$3,708.
Replacing a quadruple nut lower would take about 5 work-hours and
parts would cost about $3,405 for an estimated replacement cost of
$3,830.
Replacing a bolt would take about 2 work-hours and parts would cost
about $370 for an estimated replacement cost of $540.
Replacing an inner sleeve would take about 2 work-hours and parts
would cost about $20,073 for an estimated replacement cost of $20,243.
Replacing a control ring assembly would take about 5 work-hours and
parts would cost about $11,141 for an estimated replacement cost of
$11,566.
Replacing a bellcrank-K (collective) would take about 4 work-hours
and parts would cost about $3,400 for an estimated replacement cost of
$3,740.
Replacing a control rod tube would take about 4 work-hours and
parts would cost about $1,084 for an estimated replacement cost of
$1,424.
Replacing a forked lever would take about 3 work-hours and parts
would cost about $6,049 for an estimated replacement cost of $6,304.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this proposed AD would not have federalism
implications under Executive Order 13132. This proposed AD would not
have a substantial direct effect on the States, on the relationship
between the national Government and the States, or on the distribution
of power and responsibilities among the various levels of government.
For the reasons discussed, I certify this proposed regulation:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska to the extent that
it justifies making a regulatory distinction; and
4. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared an economic evaluation of the estimated costs to comply
with this proposed AD and placed it in the AD docket.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Proposed Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive (AD):
Airbus Helicopters Deutschland GmbH: Docket No. FAA-2018-0980;
Product Identifier 2017-SW-123-AD.
(a) Applicability
This AD applies to Airbus Helicopters Deutschland GmbH Model
MBB-BK 117 C-2 helicopters with a part listed in Table 1 to
paragraph (e) of this AD installed, certificated in any category.
Note 1 to paragraph (a) of this AD: Helicopters with an MBB-
BK117 C-2e designation are Model MBB-BK117 C-2 helicopters.
(b) Unsafe Condition
This AD defines the unsafe condition as a part remaining in
service beyond its fatigue life. This condition could result in
failure of a part and loss of control of the helicopter.
(c) Comments Due Date
We must receive comments by January 18, 2019.
(d) Compliance
You are responsible for performing each action required by this
AD within the specified compliance time unless it has already been
accomplished prior to that time.
(e) Required Actions
Before further flight, remove from service any part that has
reached or exceeded its new or reduced life limit as listed in Table
1 to paragraph (e) of this AD. Thereafter, remove from service each
part on or before reaching its new or reduced life limit as listed
in Table 1 to paragraph (e) of this AD. For purposes of this AD, a
``landing'' is counted any time the helicopter lifts off into the
air and then lands again regardless of the duration of the landing
and regardless of whether the engine is shut down.
BILLING CODE 4910-13-P
[[Page 58193]]
[GRAPHIC] [TIFF OMITTED] TP19NO18.001
BILLING CODE 4910-13-C
(f) Alternative Methods of Compliance (AMOCs)
(1) The Manager, Safety Management Section, Rotorcraft Standards
Branch, FAA, may approve AMOCs for this AD. Send your proposal to:
Matt Fuller, Senior Aviation Safety Engineer, Safety Management
Section, Rotorcraft Standards Branch, FAA, 10101 Hillwood Pkwy.,
Fort Worth, TX 76177; telephone (817) 222-5110; email [email protected].
(2) For operations conducted under a 14 CFR part 119 operating
certificate or under 14 CFR part 91, subpart K, we suggest that you
notify your principal inspector, or lacking a principal inspector,
the manager of the local flight standards district office or
certificate holding district office before operating any aircraft
complying with this AD through an AMOC.
(g) Additional Information
(1) Airbus Helicopters Alert Service Bulletin ASB MBB-BK117 C-2-
04A-008, Revision 0, dated April 27, 2017, which is not incorporated
by reference, contains additional information about the subject of
this AD. For service information identified in this AD, contact
Airbus Helicopters, 2701 N Forum Drive, Grand Prairie, TX 75052;
telephone (972) 641-0000 or (800) 232-0323; fax (972) 641-3775; or
at https://www.helicopters.airbus.com/website/en/ref/Technical-Support_73.html. You may review the referenced service information
at the FAA, Office of the Regional Counsel, Southwest Region, 10101
Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177.
(2) The subject of this AD is addressed in European Aviation
Safety Agency (EASA) AD No. 2017-0174, dated September 12, 2017. You
may view the EASA AD on the internet at https://www.regulations.gov
in the AD Docket.
(h) Subject
Joint Aircraft Service Component (JASC) Code: 6220, Main Rotor
Head; 6230 Main Rotor Mast/Swashplate; and 6710, Main Rotor Control.
Issued in Fort Worth, Texas, on November 6, 2018.
James A. Grigg,
Acting Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2018-24995 Filed 11-16-18; 8:45 am]
BILLING CODE 4910-13-P