Department of Transportation 2006 – Federal Register Recent Federal Regulation Documents

Results 551 - 600 of 3,043
Passenger Equipment Safety Standards; Miscellaneous Amendments and Attachment of Safety Appliances on Passenger Equipment
Document Number: 06-8611
Type: Rule
Date: 2006-10-19
Agency: Federal Railroad Administration, Department of Transportation
FRA is amending its existing regulations in an effort to address various mechanical issues relevant to the manufacture, efficient utilization, and safe operation of passenger equipment and trains that have arisen since FRA's original issuance of the Passenger Equipment Safety Standards. The miscellaneous amendments concentrate on the following five areas: Clarifying the terminology related to piston travel indicators; providing alternative design and additional inspection criteria for new passenger equipment not designed to allow inspection of the application and release of the brakes from outside the equipment; permitting some latitude in the use of passenger equipment with redundant air compressors when a limited number of the compressors become inoperative; recognizing current locomotive manufacturing techniques by permitting an alternative pneumatic pressure test for main reservoirs; and adding provisions to ensure the proper securement of unattended equipment. FRA is also clarifying the existing regulatory requirements related to the attachment of safety appliances and is mandating an identification and inspection protocol to address passenger equipment containing welded safety appliances or welded safety appliance brackets or supports. Finally, FRA is amending the regulations to permit railroads the ability to apply out-of-service credit to certain periodic maintenance requirements related to passenger equipment.
Interstate Oasis Program
Document Number: E6-17367
Type: Notice
Date: 2006-10-18
Agency: Federal Highway Administration, Department of Transportation
The FHWA is issuing this approved final Interstate Oasis Program policy document. Section 1310 of the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU) (Public Law 109-59, August 10, 2005) requires the Secretary of Transportation to develop standards for designating certain facilities as Interstate Oases and to design a uniform logo for such designated facilities. After consideration of public comments on a draft program and policy document, the FHWA has finalized the policies for the Interstate Oasis program.
Special Conditions: Boeing Commercial Airplane Group, Boeing Model 777-200 Series Airplane; Overhead Cross Aisle Stowage Compartments
Document Number: E6-17345
Type: Proposed Rule
Date: 2006-10-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes special conditions for the Boeing Model 777- 200 series airplanes. This airplane, modified by Boeing Commercial Airplane Group, will have novel or unusual design features associated with overhead cross aisle stowage compartments. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These proposed special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Pratt & Whitney JT8D-1, -1A, -1B, -7, -7A, -7B, -9, -9A, -11, -15, -15A, -17, -17A, -17R, -17AR, -209, -217, -217A, -217C, and -219 Turbofan Engines
Document Number: E6-17327
Type: Rule
Date: 2006-10-18
Agency: Federal Aviation Administration, Department of Transportation
The FAA is revising an existing airworthiness directive (AD) for Pratt & Whitney (PW) JT8D-1, -1A, -1B, -7, -7A, -7B, -9, -9A, -11, -15, -15A, -17, -17A, -17R, -17AR, -209, -217, -217A, -217C, and -219 turbofan engines. That AD currently requires either replacing high pressure compressor (HPC) front hubs and HPC disks that have operated at any time with PWA 110-21 coating and that operated in certain engine models, or, visually inspecting and fluorescent penetrant inspecting (FMPI) for cracking of those parts and re-plating them if they pass inspection. This AD requires the same actions, but makes necessary corrections to inadvertent reference errors and omissions found in AD 2006-17-07, and relaxes some of the compliance times in Table 5. This AD results from our finding reference errors and omissions in AD 2006- 17-07, from determining that the AD as drafted imposed an unnecessary burden on operators if they have to immediately remove engines, and from requests to clarify compliance paragraphs. We are issuing this AD to prevent a rupture of an HPC front hub or an HPC disk that could result in an uncontained engine failure and damage to the airplane.
Transfer of Federally Assisted Land or Facility
Document Number: E6-17264
Type: Notice
Date: 2006-10-18
Agency: Federal Transit Administration, Department of Transportation
Section 5334(g) of the Federal Transit Laws, as codified, 49 U.S.C. 5301 et seq., permits the Administrator of the Federal Transit Administration (FTA) to authorize a recipient of FTA funds to transfer land or a facility to a public body for any public purpose with no further obligation to the Federal Government if, among other things, no Federal agency is interested in acquiring the asset for Federal use. Accordingly, FTA is issuing this notice to advise Federal agencies that New Jersey Transit (NJT) intends to transfer the Union City Bus Maintenance Facility on New York Avenue in Union City, New Jersey, to the City of Union City. The property comprises one entire block and is bounded by Bergenline Avenue on the west, New York Avenue on the east, 29th Street on the north and 27th Street on the south. NJT no longer has a need for, and has not occupied the property for some time. Union City intends to use the property as a department of public works consolidated maintenance and storage facility for its fleet of vehicles, as well as create structured public parking and other uses.
Airworthiness Directives; Boeing Model 747-400, 777-200, and 777-300 Series Airplanes
Document Number: E6-17187
Type: Rule
Date: 2006-10-18
Agency: Federal Aviation Administration, Department of Transportation
This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 747-400, 777-200, and 777-300 series airplanes. This AD requires, for certain airplanes, replacing the cell stack of the flight deck humidifier with a supplier-tested cell stack, or replacing the cell stack with a blanking plate and subsequently deactivating the flight deck humidifier. For certain other airplanes, this AD requires an inspection of the flight deck humidifier to determine certain part numbers and replacing the cell stack if necessary. This AD also allows blanking plates to be replaced with cell stacks. The actions specified by this AD are intended to prevent an increased pressure drop across the humidifier and consequent reduced airflow to the flight deck, which could result in the inability to clear any smoke that might appear in the flight deck. This action is intended to address the identified unsafe condition.
Special Conditions: Dassault Aviation Model Falcon 7X Airplane; Interaction of Systems and Structures, Limit Pilot Forces, and High Intensity Radiated Fields (HIRF) Protection
Document Number: 06-8762
Type: Proposed Rule
Date: 2006-10-18
Agency: Federal Aviation Administration, Department of Transportation
This action proposes special conditions for the Dassault Aviation Model Falcon 7X airplane. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features include interaction of systems and structures, limit pilot forces, and electrical and electronic flight control systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Office of Hazardous Materials Safety; Notice of Application for Special Permits
Document Number: 06-8749
Type: Notice
Date: 2006-10-18
Agency: Pipeline and Hazardous Materials Safety Administration, Department of Transportation
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit
Document Number: 06-8748
Type: Notice
Date: 2006-10-18
Agency: Pipeline and Hazardous Materials Safety Administration, Department of Transportation
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Request of modifications of special permits (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix ``M'' denote a modification request. These applications have been separated from the new applications for special permits to facilitate processing.
Airworthiness Directives; Raytheon Aircraft Company Models 58 and G58 Airplanes
Document Number: E6-17188
Type: Proposed Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Raytheon Aircraft Company (RAC) Models 58 and G58 airplanes with optional propeller unfeathering accumulators installed. This proposed AD would require you to inspect the left propeller accumulator oil tube assembly for any chafing; replace the propeller accumulator oil tube assembly if any chafing is found; and reposition and secure with clamps both the left engine manifold pressure hose and its metal identification tags to avoid contact with other tubes, hoses, electrical wires, parts, components, and structure. This proposed AD results from several reports on the affected airplanes of chafing damage on the left propeller accumulator oil tube assembly. This includes an in-flight oil leak from the left engine on an RAC Model G58 airplane. We are proposing this AD to detect, correct, and prevent any chafing damage of the left propeller accumulator oil tube assembly, which could result in loss of engine oil. Loss of engine oil may lead to fire or smoke in the engine compartment, inability to unfeather the propeller, engine damage, or loss of engine power.
Airworthiness Directives; MD Helicopters, Inc. Model MD900 Series Helicopters
Document Number: E6-17186
Type: Proposed Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
This document proposes adopting a new airworthiness directive (AD) for MD Helicopters, Inc. (MDHI) Model MD900 series helicopters. The AD would require modifying the pilot and co-pilot dual-control directional pedal assemblies, or the pilot single-control directional pedal assembly (directional control pedal assembly). This proposal is prompted by an accident which has been attributed to loss of directional control due to failure of the welds in the directional control pedal assembly. The actions specified by the proposed AD are intended to prevent fatigue cracking in the welds that connect the directional control pedal to the pedal shaft, resulting in loss of directional control and subsequent loss of control of the helicopter.
Airworthiness Directives; Bell Helicopter Textron Model 206B Helicopters
Document Number: E6-17185
Type: Proposed Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
The FAA withdraws a notice of proposed rulemaking (NPRM) that proposed adopting a new airworthiness directive (AD) for Bell Helicopter Textron (Bell) Model 206B helicopters modified with Aeronautical Accessories, Inc. (AAI) Supplemental Type Certificate (STC) No. SH8435SW or SH8419SW with energy attenuating seat installation wire (energy attenuating wire). The proposed AD would have required replacing certain energy attenuating wire with airworthy energy attenuating wire. Since issuing the proposed AD, we have determined that no unsafe condition exists with respect to the STC installed energy attenuating wire. Accordingly, the proposed AD is withdrawn.
Petition for Waiver of Compliance
Document Number: E6-17165
Type: Notice
Date: 2006-10-17
Agency: Federal Railroad Administration, Department of Transportation
Petition for Waiver of Compliance
Document Number: E6-17164
Type: Notice
Date: 2006-10-17
Agency: Federal Railroad Administration, Department of Transportation
Rail Transportation of Grain
Document Number: E6-17151
Type: Notice
Date: 2006-10-17
Agency: Surface Transportation Board, Department of Transportation
The Surface Transportation Board will hold a public hearing beginning at 10 a.m. on Thursday, November 2, 2006, at its offices in Washington, DC. The purpose of the public hearing will be to examine issues related to the transportation of grain by rail. Persons wishing to speak at the hearing should notify the Board in writing.
Coast Belle Rail, LLC-Acquisition Exemption-Santa Maria Valley Railroad Company
Document Number: E6-17141
Type: Notice
Date: 2006-10-17
Agency: Surface Transportation Board, Department of Transportation
Comprehensive Safety Analysis 2010 Initiative
Document Number: 06-8723
Type: Notice
Date: 2006-10-17
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
The Federal Motor Carrier Safety Administration (FMCSA) is holding a public listening session to obtain feedback on the Agency's Comprehensive Safety Analysis 2010 initiative (CSA 2010), a comprehensive review and analysis of FMCSA's current commercial motor carrier safety and enforcement programs. FMCSA will use the upcoming listening session to inform the public on the conceptual direction and progress of CSA 2010, and obtain feedback from its partners and stakeholders. To facilitate the upcoming listening session, FMCSA has included in this notice a number of questions that commenters are invited to address.
Establishment of Class E Airspace; Sayre, PA
Document Number: 06-8687
Type: Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at Robert Packer Hospital, Sayre, Pennsylvania. The development of an Area Navigation (RNAV), Helicopter Point in Space Approach, for the Robert Packer Hospital, Sayre, PA, has made this action necessary. Controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain aircraft executing the approach to the Robert Packer Hospital.
Establishment of Class E Airspace; Ridgeway, PA
Document Number: 06-8685
Type: Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at Ridgeway Landing Zone, Ridgeway, PA. Development of an Area Navigation (RNAV), Helicopter Point in Space Approach, for the Ridgeway Landing Zone, Ridgeway, PA, has made this action necessary. Controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain aircraft executing the approach to the Ridgeway Landing Zone.
Establishment of Class E Airspace; Troy, PA
Document Number: 06-8684
Type: Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at Hill Top Heliport, Troy, Pennsylvania. The development of an Area Navigation (RNAV), Helicopter Point in Space Approach, for the Hill Top Heliport, Troy, PA, has made this action necessary. Controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain aircraft executing the approach to the Hill Top Heliport.
Establishment of Class E Airspace: Jersey Shore Airport, PA
Document Number: 06-8683
Type: Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at Jersey Shore Airport, PA. Development of an Area Navigation (RNAV), Helicopter Point in Space Approach, for the Jersey Shore Airport, Jersey Shore, PA, has made this action necessary. Controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain aircraft executing the approach to the Jersey Shore Airport.
Establishment of Class E Airspace; Wellsboro, PA
Document Number: 06-8682
Type: Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at Nessmuk Helipad, Wellsboro, Pennsylvania. The development of an Area Navigation (RNAV), Helicopter Point in Space Approach, for the Nessmuk Helipad, Wellsboro, PA, has made this action necessary. Controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain aircraft executing the approach to the Nessmuk Helipad.
Establishment of Class E Airspace; Wilkes Barre, PA
Document Number: 06-8681
Type: Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at Wyoming Valley Medical Center, Wilkes Barre, Pennsylvania. The development of an Area Navigation (RNAV), Helicopter Point in Space Approach, for the Wyoming Valley Medical Center, has made this action necessary. Controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain aircraft executing the approach to the Wyoming Valley Medical Center, Wilkes Barre, PA.
Establishment of Class E Airspace; Tunkhannock, PA
Document Number: 06-8680
Type: Rule
Date: 2006-10-17
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at Tyler Memorial Hospital, Tunkhannock, PA. Development of an Area Navigation (RNAV), Helicopter Point in Space Approach, for the Tyler Memorial Hospital Heliport, Tunkhannock, PA, has made this action necessary. Controlled airspace extending upward from 700 feet Above Ground Level (AGL) is needed to contain aircraft executing the approach to the Tyler Memorial Hospital Heliport.
Pipeline Safety: Request for Waiver; Key West Pipeline Company
Document Number: E6-17097
Type: Notice
Date: 2006-10-16
Agency: Pipeline and Hazardous Materials Safety Administration, Department of Transportation
PHMSA is seeking public comment on a waiver request from Key West Pipeline Company (KWPC) and Pipeline and Terminal Management Corporation (PTMC). KWPC and PTMC are requesting a waiver from the regulations governing the marking and depth of cover of burial requirements for underwater pipelines. Instead of marking and burying its pipeline as required under PHMSA regulations, KWPC and PTMC propose to post and maintain warning signs.
Petitions for Exemption; Summary of Petitions Received
Document Number: E6-17096
Type: Notice
Date: 2006-10-16
Agency: Federal Aviation Administration, Department of Transportation
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Petitions for Exemption; Summary of Petitions Received; Reopening of Comment Period
Document Number: E6-17095
Type: Notice
Date: 2006-10-16
Agency: Federal Aviation Administration, Department of Transportation
This action reopens the comment period for a petition for exemption that was published on September 6, 2006. Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Clean Fuels Grant Program
Document Number: E6-17071
Type: Proposed Rule
Date: 2006-10-16
Agency: Federal Transit Administration, Department of Transportation
Section 3010 of the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU), amended section 5308 of title 49 United States Code, commonly referred to as the Clean Fuels Grant Program. SAFETEA-LU changes the program from a formula-based to a discretionary grant program. The Federal Transit Administration (FTA) proposes to amend its clean fuels grant program regulations to comport with the provisions of SAFETEA-LU.
Airworthiness Directives; General Electric Company CF34-10E Series Turbofan Engines; Correction
Document Number: E6-17007
Type: Rule
Date: 2006-10-16
Agency: Federal Aviation Administration, Department of Transportation
This document makes a correction to Airworthiness Directive (AD) 2006-20-06. That AD applies to General Electric Company (GE) CF34- 10E series turbofan engines. We published AD 2006-20-06 in the Federal Register on September 29, 2006 (71 FR 57403). The issue date of the AD was inadvertently omitted. This document adds the AD issue date. In all other respects, the original document remains the same.
Notice of Opportunity To Participate, Criteria Requirements and Application Procedure for Participation in the Military Airport Program (MAP)
Document Number: 06-8686
Type: Notice
Date: 2006-10-16
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the criteria, application procedures, and schedule to be applied by the Secretary of Transportation in designating or redesignating, and funding capital development annually for up to 15 current (joint-use) or former military airports seeking designation or redesignation to participate in the Military Airport Program (MAP). The MAP allows the Secretary to designate current (joint-use) or former military airports to receive grants from the Airport Improvement Program (AIP). The Secretary is authorized to designate an airport (other than an airport designated before August 24, 1994) only if: (1) The airport is a former military installation closed or realigned under the Title 10 U.S.C. 2687 (announcement of closures of large Department of Defense installations after September 30, 1977), or under Section 201 or 2905 of the Defense Authorization Amendments and Base Closure and Realignment Acts; or (2) The airport is a military installation with both military and civil aircraft operations. The Secretary shall consider for designation only those current or former military airports, at least partly converted to civilian airports as part of the national air transportation system, that will reduce delays at airports with more than 20,000 hours of annual delays in commercial passenger aircraft takeoffs and landings, or will enhance airport and air traffic control system capacity in metropolitan areas or reduce current and projected flight delays (49 U.S.C. 47118(c)).
Qualification of Drivers; Exemption Requests; Epilepsy and Seizure Disorders
Document Number: E6-17032
Type: Notice
Date: 2006-10-13
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA announces receipt of applications from four individuals for exemptions from the prohibition against persons with a clinical diagnosis of epilepsy (or any other condition which is likely to cause a loss of consciousness or any loss of ability to control a commercial motor vehicle (CMV)), operating trucks and buses in interstate commerce. If granted, the exemptions would enable these individuals with seizure disorders to operate CMVs in interstate commerce. All records associated with these requests are available in the public docket.
Medical Review Board Meeting
Document Number: E6-17031
Type: Notice
Date: 2006-10-13
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA announces that its MRB will hold a public meeting. The MRB members will continue deliberations about current FMCSA medical standards, as well as consider recommendations for new science-based standards and guidelines to ensure that the physical condition of drivers is adequate to enable them to safely operate commercial motor vehicles (CMVs) in interstate commerce. In accordance with the Federal Advisory Committee Act (FACA), the meeting is open to the public.
Membership in the National Parks Overflights Advisory Group
Document Number: E6-17030
Type: Notice
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
By Federal Register notice (See 71 FR 16610; April 3, 2006), the National Park Service (NPS) and the Federal Aviation Administration (FAA), asked interested persons to apply to fill six vacant positions on the National Parks Overflights Advisory Group (NPOAG) Aviation Rulemaking Committee (ARC). The vacancies represent general aviation (one vacancy), commercial air tour operators (two vacancies), environmental concerns (two vacancies) and Native American tribes (one vacancy), and invited interested persons to apply to fill the vacancies due to completion (October 9, 2006) of a three-year term appointment. This notice informs the public of the persons selected to fill the vacancies on the NPOAG ARC.
Environmental Impact Statement: Polk County, IA
Document Number: E6-17015
Type: Notice
Date: 2006-10-13
Agency: Federal Highway Administration, Department of Transportation
The FHWA and Iowa DOT are issuing this notice to advise the public an EIS will be prepared for a proposed roadway project in Polk County, Iowa. The planned EIS will evaluate potential transportation improvement alternatives for serving northwest Des Moines and its neighboring communities between IA 415 and Euclid Avenue.
Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Airplanes
Document Number: E6-17006
Type: Proposed Rule
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.
Airworthiness Directives; Bombardier Model DHC-8-400 Series Airplanes
Document Number: E6-17005
Type: Proposed Rule
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain Bombardier Model DHC-8-400 series airplanes. The existing AD currently requires revising the airplane flight manual (AFM) to advise the flightcrew of appropriate procedures to follow in the event that a main landing gear (MLG) fails to extend following a gear-down selection. The existing AD also currently requires repetitive replacement of the left and right MLG uplock assemblies with new assemblies; and an inspection of the left and right MLG uplock rollers for the presence of an inner low friction liner, and corrective actions if necessary. This proposed AD would revise the requirement for replacing the left and right MLG uplock assemblies by allowing replacement with alternative parts. For a certain MLG uplock assembly, this proposed AD would require repetitive inspections of the uplock hatch lower jaw for the presence of a wear groove and replacement with an improved part if necessary. For a certain MLG uplock assembly, this proposed AD also would require repetitive inspections of the uplock roller to ensure that it rotates freely and replacement with a new part if necessary. This proposed AD would allow optional replacement of the left and right MLG uplock assemblies with improved parts, which ends the requirements of the AFM revision and repetitive replacement and inspections. This proposed AD would remove airplanes from the applicability. This proposed AD results from development of a terminating action. We are proposing this AD to ensure that the flightcrew has the procedures necessary to address failure of an MLG to extend following a gear-down selection; and to detect and correct such failure, which could result in a gear-up landing and possible injury to passengers and crew.
Airworthiness Directives; McDonnell Douglas Model 717-200 Airplanes
Document Number: E6-17004
Type: Proposed Rule
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain McDonnell Douglas Model 717-200 airplanes. This proposed AD would require replacing certain attaching hardware of the bulkhead nipple assemblies of the left and right wing vent boxes with new electrical bonding attaching hardware, doing resistance testing of the new electrical bonds, and doing fuel leakage testing of the reworked nipple assemblies. This proposed AD results from fuel system reviews conducted by the manufacturer. We are proposing this AD to provide a conductive path, from the bulkhead nipple assemblies of the left and right wing vent boxes to the airframe structure inside the wing fuel tanks, to dissipate high amperage lightning-induced currents which might otherwise create an ignition source for fuel vapors inside the wing vent boxes and lead to an explosion of the fuel tanks.
Airworthiness Directives; McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, and DC-10-30F (KC-10A and KDC-10) Airplanes; Model DC-10-40 and DC-10-40F Airplanes Equipped With Pratt & Whitney JT9-20 or JT9-20J Engines; and Model MD-10-10F and MD-10-30F Airplanes
Document Number: E6-17003
Type: Proposed Rule
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for the McDonnell Douglas airplanes previously described. This proposed AD would require replacing the control modules of the fire detection systems of the propulsion engines with new, improved control modules. This proposed AD results from a report of broken or severed wiring between engine fire detectors and the fire detection system control module, which caused the fire detection system to become non-functional without flightcrew awareness. We are proposing this AD to prevent unannunciated fire in a propulsion engine, which could cause injury to flightcrew and passengers or loss of the airplane.
Montana Rail Link, Inc.-Trackage Rights Exemption-BNSF Railway Company
Document Number: E6-16989
Type: Notice
Date: 2006-10-13
Agency: Surface Transportation Board, Department of Transportation
Montana Rail Link, Inc.-Trackage Rights Exemption-BNSF Railway Company
Document Number: E6-16949
Type: Notice
Date: 2006-10-13
Agency: Surface Transportation Board, Department of Transportation
Charter Service Negotiated Rulemaking Advisory Committee
Document Number: E6-16939
Type: Proposed Rule
Date: 2006-10-13
Agency: Federal Transit Administration, Department of Transportation, Federal Trade Commission, Agencies and Commissions
This notice lists the location and time of the next Charter Bus Negotiated Rulemaking Advisory Committee (CBNRAC) meeting.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ and EMB-145XR Airplanes
Document Number: E6-16895
Type: Rule
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
This amendment adopts a new airworthiness directive (AD), applicable to certain Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ and Model EMB-145XR airplanes. This AD requires, for all airplanes, installation of an additional indication device to the clear-ice indication system. For certain airplanes, this AD requires replacing the existing clear-ice indication lamp with a new, improved lamp. For certain other airplanes, this AD also requires modifying certain electrical connections to add an indication device to the clear-ice indication system, removing a certain placard, and re- activating the clear-ice additional indicator lamp. The actions specified by this AD are intended to prevent undetected build-up of clear ice on the wing surfaces, which could lead to reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
Airworthiness Directives; Cirrus Design Corporation Models SR20 and SR22 Airplanes
Document Number: E6-16741
Type: Rule
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA adopts a new airworthiness directive (AD) for certain Cirrus Design Corporation (CDC) Models SR20 and SR22 airplanes. This AD requires you to check the maintenance records to determine whether the brake caliper piston O-ring seals were replaced at the last annual or 100-hour inspection. If the O-rings were not replaced, this AD requires you to replace the O-ring seals with new seals or replace brake calipers. This AD also requires you to modify the main landing gear wheel fairings to add temperature indicator sticker inspection holes, trim the wheel fairings to prevent them from holding fluids, install temperature indicator stickers on the brake calipers, and insert Revision A6 (with revised preflight walk-around, a limitation on the engine speed used to taxi, and brake inspection/servicing intervals) into the Pilot's Operating Handbook (POH). This AD results from several reports of airplanes experiencing brake fires and two airplanes losing directional control. We are issuing this AD to detect, correct, and prevent overheating damage to the brake caliper piston O-ring seals, which could result in leakage of brake hydraulic fluid. Consequently, this could lead to the loss of braking with loss of airplane directional control or brake fire.
Modification of the Class B Airspace Area; Atlanta, GA
Document Number: 06-8688
Type: Rule
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
This action makes minor modifications to the floor of the Atlanta, GA, Class B airspace area in order to contain large, turbine- powered aircraft within Class B airspace during simultaneous triple instrument landing system (STILS) operations at the Hartsfield-Jackson Atlanta International Airport (ATL). In addition, this action makes two editorial changes to the Atlanta Class B airspace legal description. The FAA is taking this action to enhance safety and to prevent significant air traffic delays in the National Airspace System (NAS).
Ninth Meeting: RTCA Special Committee 207/Airport Security Access Control Systems
Document Number: 06-8666
Type: Notice
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 207, Airport Security Access Control Systems.
Operating Limitations at Chicago O'Hare International Airport; Notice of Order
Document Number: 06-8658
Type: Notice
Date: 2006-10-13
Agency: Federal Aviation Administration, Department of Transportation
On September 22, 2006, the FAA issued an order to show cause, which solicited written views on modifying the August 2004 Order temporarily limiting scheduled operations at O'Hare International Airport (O'Hare) to allow carriers to trade and transfer scheduled arrivals for consideration for the remaining duration of the Order. The FAA is issuing a final modification to the Order based on the proposal.
Amending the Congestion and Delay Reduction at Chicago O'Hare International Airport
Document Number: 06-8651
Type: Rule
Date: 2006-10-13
Agency: Department of Transportation, Federal Aviation Administration
The FAA published a final rule on August 29, 2006, (71 FR 51382), to address persistent flight delays from overscheduling at O'Hare International Airport (O'Hare). This amendment revises section 93.25, ``Initial assignment of Arrival Authorizations to U.S. and Canadian air carriers for domestic and U.S./Canada transborder service,'' to direct the FAA to assign each U.S. and Canadian conducting scheduled service at O'Hare by January 27, 2007, Arrival Authorizations based on their permanent holdings as of the 7-day period of October 22 through October 28, 2006, as evidenced by the FAA's records. While the FAA is making this rule effective without notice and comment, the FAA invites the public to comment on the amendment. The FAA will consider the comments to see whether the rule should be further modified.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.