Department of Transportation September 2018 – Federal Register Recent Federal Regulation Documents

This rule allows, but does not require, State Driver Licensing Agencies (SDLAs) to waive requirements for the commercial learner's permit (CLP) knowledge test for certain individuals who are, or were, regularly employed within the last year in a military position that requires, or required, the operation of a commercial motor vehicle (CMV). This rule includes the option for an SDLA to waive the tests required for a passenger carrier (P) endorsement, tank vehicle (N) endorsement, or hazardous material (H) endorsement, with proof of training and experience.

The FAA is considering a proposal to change 97.507 acres of airport land from aeronautical use to non-aeronautical use and to authorize the sale of airport property located at Indianapolis International Airport, Indianapolis, Indiana. The aforementioned land is not needed for aeronautical use. The land consists of 155 original airport acquired parcels. The parcels were acquired under grants 6-18-0038-14, 3-18-0038-17, 3-18- 0038-18, 3-18-0038-23, 3-18-0038-24, 3-18-0038-43, 3-18-0038-45, 3-18- 0038-47, 3-18-0038-51, 3-18-0038-54, 3-18-0038-67, 3-18-0038-78, 3-18- 0038-81, 3-18-0038-83, 3-18-0038-88, 3-18-0038-96, 3-18-0038-112, Passenger Facility Charges, and local funding. There are no impacts to the airport by allowing the Indianapolis Airport Authority to dispose of the property. The land is not needed for future aeronautical development.

The Federal Aviation Administration (FAA) is hosting an industry day to introduce the Four-Dimensional Trajectory (4DT) Live Flight Demonstration Project to the aviation community. The FAA will present and discuss the 4DT Live Flight Demonstration Project vision, objectives, partnership requirements, and project timelines. The Industry Day will provide the initial platform for interested organizations to collaborate and strategize on project partnerships to execute the live flight demonstrations with the FAA.

As part of its continuing effort to reduce paperwork burdens, and as required by the Paperwork Reduction Act of 1995 (PRA), the Surface Transportation Board (Board) gives notice of its intent to request from the Office of Management and Budget (OMB) approval without change of the six existing collections described below. The Board previously published a notice about this collection in the Federal Register (July 11, 2018). That notice allowed for a 60-day public review and comment period. No comments were received.

We are superseding Airworthiness Directive (AD) 98-18-24, which applied to certain Airbus SAS Model A320 series airplanes. AD 98- 18-24 required repetitive inspections to detect cracking in the inner flange of a certain door frame, and corrective actions, if necessary. AD 98-18-24 also provided an optional terminating action for the repetitive inspections. This AD continues to require the repetitive inspections of the inner flange of a certain door frame, with reduced repetitive inspection intervals, and corrective action if necessary. This AD was prompted by a report of cracks on the inner flange of a certain door frame, and by the results of a full scale fatigue test that indicated the intervals for the repetitive inspections required by AD 98-18-24 must be reduced. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 190-100 STD, -100 LR, -100 ECJ, and -100 IGW airplanes; and Model ERJ 190-200 STD, -200 LR, and -200 IGW airplanes. This AD was prompted by reports of bushing migration and loss of nut torque on the engine pylon lower inboard and outboard link fittings. This AD requires modification of the attaching parts of the left-hand (LH) and right-hand (RH) pylon lower link fittings, inboard and outboard positions. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model 4101 airplanes. This AD was prompted by a report of an improperly installed spacer around the electrical pins in the cartridge connector for the fire bottle extinguisher cartridge. This AD requires repetitive inspections for excessive or missing spacers, and applicable corrective actions. We are issuing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 727 airplanes. This proposed AD was prompted by a report of cracking in the inboard lower flange and adjacent web near the forward attachment of the outboard flap track at a certain position on a Model 737-300 airplane. The flap tracks of Model 737-300 airplanes are similar to the flap tracks of Model 727 airplanes. This proposed AD would require repetitive detailed inspections and surface high frequency eddy current (HFEC) inspections of each outboard flap track at certain positions for any crack and discrepancy, and applicable on-condition actions. We are proposing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 707, 720, and 720B series airplanes. This AD was prompted by a report indicating that a fracture of the midspar fitting resulted in the separation of the inboard strut and engine from the airplane, and a determination that existing inspections are not sufficient for timely detection of cracking. This AD requires repetitive inspections of certain nacelle strut spar and overwing fittings, and diagonal braces and associated fittings; replacement of the diagonal brace assembly on certain airplanes; and applicable related investigative and corrective actions. We are issuing this AD to address the unsafe condition on these products.

The FMCSA announces two additional public listening sessions on potential changes to its hours-of-service (HOS) rules for truck drivers. On August 23, 2018, FMCSA published an Advance Notice of Proposed Rulemaking (ANPRM) seeking public comment on four specific aspects of the HOS rules for which the Agency is considering changes: The short-haul HOS limit; the HOS exception for adverse driving conditions; the 30-minute rest break provision; and the sleeper berth rule to allow drivers to split their required time in the sleeper berth. In addition, the Agency requested public comment on petitions for rulemaking from the Owner-Operator Independent Drivers Association (OOIDA) and TruckerNation.org (TruckerNation). The Agency encourages vendors of electronic logging devices (ELDs) to participate to address potential implementation issues should changes to the HOS rules be made. The listening sessions will be held in Orlando, FL, and in Joplin, MO, and will be webcast for the benefit of those not able to attend in person. The listening sessions will allow interested persons to present comments, views, and relevant research on topics mentioned above. All comments will be transcribed and placed in the rulemaking docket for the FMCSA's consideration.

FMCSA announces that it is initiating rulemaking action pertaining to the implementation of the Moving Ahead for Progress in the 21st Century Act (MAP-21). MAP-21 raised the financial security amount for brokers to $75,000 and, for the first time, established financial security requirements for freight forwarders. In this ANPRM, the Agency is considering eight separate areas: Group surety bonds/ trust funds, assets readily available, immediate suspension of broker/ freight forwarder operating authority, surety or trust responsibilities in cases of broker/freight forwarder financial failure or insolvency, enforcement authority, entities eligible to provide trust funds for form BMC-85 trust fund filings, Form BMC-84 and BMC-85 trust fund revisions, and household goods (HHG). The Agency seeks comments and data in response to this ANPRM.

This action proposes to modify 3 jet routes, 2 high altitude area navigation (RNAV) Q-routes, and 8 VHF Omnidirectional Range (VOR) Federal airways, and establish 4 low altitude RNAV T-routes in the vicinity of Houston, TX, due to the planned decommissioning of the Hobby, TX, VOR/Distance Measuring Equipment (VOR/DME) navigation aid (NAVAID), which provides navigation guidance for portions of the affected ATS routes

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 707 airplanes, and Model 720 and 720B series airplanes. This AD was prompted by fuel system reviews conducted by the manufacturer. This AD requires revising the maintenance or inspection program to include new airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.

This document extends the comment period for a proposed rule published in the August 24, 2018 issue of the Federal Register entitled The Safer Affordable Fuel-Efficient (SAFE) Vehicles Rule for Model Years 2021-2026 Passenger Cars and Light Trucks and also extends the comment period for NHTSA's Draft Environmental Impact Statement that accompanies it. This extension is shorter than that requested by several parties, and those requests are accordingly denied.

The FAA is considering a proposal to change 55.4 acres of airport land from aeronautical use to non-aeronautical use and to authorize the sale of airport property Rantoul National Aviation Center-Frank Elliott Field, Rantoul, Illinois. The aforementioned land is not needed for aeronautical use. The parcels are located east of Pacesetter Drive and Galaxy Drive on Rantoul National Aviation Center- Frank Elliott Field. The Village of Rantoul has determined that the parcels are no longer needed for the direct operations of the airport.

In accordance with the Paperwork Reduction Act of 1995, the Federal Aviation Administration (FAA) invites public comments about our intention to request Office of Management and Budget (OMB) approval to renew an information collection. The collection involves each passenger carrying air carrier operating under part 121 of title 14, Code of Federal Regulations, to post on the internet website of the air carrier the maximum dimensions of a child safety seat that can be used on those aircraft. The information to be collected will be used to facilitate the use of child restraint systems onboard airplanes and is required by section 412 of the FAA Modernization and Reform Act of 2012. The Federal Register Notice with a 60-Day comment period soliciting comments on the renewal of this previously approved information collection was published on July 25, 2018. No comments were received.

This action establishes Class E airspace extending upward from 700 feet above the surface at Glen Ullin Regional Airport, Glen Ullin, ND. Controlled airspace is necessary to accommodate new standard instrument approach procedures developed at Glen Ullin Regional Airport, for the safety and management of instrument flight rules (IFR) operations at this airport.

We are superseding Airworthiness Directive (AD) 2010-25-06, which applied to certain The Boeing Company Model 737-200, -300, -400, and -500 series airplanes. AD 2010-25-06 required repetitive inspections for cracking of certain fuselage frames and stub beams, and corrective actions if necessary. AD 2010-25-06 also provided for an optional repair, which terminated the repetitive inspections. For airplanes on which a certain repair was done, AD 2010-25-06 also required repetitive inspections for cracking of certain fuselage frames and stub beams, and corrective actions if necessary. This AD retains the actions required by AD 2010-25-06 and expands the inspection area. This AD was prompted by additional cracking found in areas not covered by the inspections in AD 2010-25-06. We are issuing this AD to address the unsafe condition on these products.

We are superseding Airworthiness Directive (AD) 2015-17-04, which applied to certain Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), Model CL-600-2D15 (Regional Jet Series 705), and Model CL-600-2D24 (Regional Jet Series 900) airplanes. AD 2015-17-04 required replacement of left and right fixed control rods and lever assemblies of the elevator control system. This AD adds a detailed visual inspection of the key washers and self-locking nuts of the elevator control linkages and corrective actions if necessary. This AD was prompted by reports of a disconnect between the elevator lever and control rod and a report indicating that certain revisions of the service information were missing instructions for proper installation of certain key washers. We are issuing this AD to address the unsafe condition on these products.

Under a notice published in the Federal Register, the FRA sought applications from eligible parties for the Fiscal Year 2018 Consolidated Rail Infrastructure and Safety Improvements program that will improve intercity passenger and freight rail transportation systems in terms of safety, efficiency, or reliability. Due to Hurricane Florence, the FRA is extending the application deadline to give applicants additional time to complete the application process and submit applications.

We are adopting a new airworthiness directive (AD) for all Viking Air Limited Models DHC-2 Mk. I, DHC-2 Mk. II, and DHC-2 Mk. III airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracking found in the wing rear spar web at the wing station where the flap outboard hinge is attached. We are issuing this AD to require actions to address the unsafe condition on these products.

In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on August 8, 2017. No comments were received.

We are superseding Airworthiness Directive (AD) 2017-14-03 for Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters. AD 2017-14-03 required an inspection and reduced the retirement lives of certain landing gear components. This new AD retains the requirements of AD 2017-14-03, reduces the retirement lives of additional landing gear components, and requires repeating the inspection. This AD was prompted by a revised analysis of the fatigue life of the landing gear. The actions of this AD are intended to prevent an unsafe condition on these products.