Department of Transportation September 12, 2018 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Pilot Program for Expedited Project Delivery
The Federal Transit Administration (FTA) is soliciting expressions of interest for the Expedited Project Delivery Pilot Program (Pilot Program) authorized by the Fixing America's Surface Transportation Act (FAST). The Pilot Program is aimed at expediting delivery of new fixed guideway capital projects, small starts projects, or core capacity improvement projects that utilize public-private partnerships, are planned to be operated and maintained by employees of an existing public transportation provider, and have a Federal share not exceeding 25 percent of the project cost. It is also aimed at increasing innovation, improving efficiency and timeliness of project implementation, and encouraging new revenue streams. The law specifies that not more than eight projects can be awarded grants under the Pilot Program. FTA intends to work with selected project sponsors to further define the steps that must be completed before a construction grant can be awarded under the Pilot Program, including expedited FTA reviews of technical capacity, local financial commitment, and project justification. This announcement is available on the FTA's website at: www.transit.dot.gov/funding/grants/expedited-project-delivery -capital- investment-grants-pilot-3005b.
Reports, Forms, and Recordkeeping Requirements
The National Highway Traffic Safety Administration (NHTSA) is announcing an opportunity for public comment on the proposed collection of certain information by the Agency. Under the Paperwork Reduction Act of 1995 (the PRA), Federal Agencies are required to publish a notice in the Federal Register concerning each proposed collection of information and to allow 60 days for public comment in response to the notice. This notice solicits comments on an information collection supporting the development of improved child-size crash test dummies.
Petition for Exemption; Summary of Petition Received; The Boeing Company
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Special Conditions: The Boeing Company (Boeing), Model 787-8, 787-9, and 787-10 Series Airplanes; Dynamic Test Requirements for Single-Occupant, Oblique (Side-Facing) Seats With or Without Airbag Devices or 3-Point Restraints
These amended special conditions are issued for the Boeing Model 787-8, 787-9, and 787-10 series airplanes. This amendment states that the Boeing Model 787-8, 787-9, and 787-10 series airplanes oblique (side-facing) seats may be installed at an angle of 18 to 45 degrees to the airplane centerline and may include a 3-point or airbag restraint system, or both, for occupant restraint and injury protection. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features are oblique (side- facing) single-occupant seats equipped with airbag devices or 3-point restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: The Boeing Company (Boeing), Model 777 Series Airplanes; Dynamic Test Requirements for Single Occupant Oblique Seats, With or Without Airbag Devices or 3-Point Restraints
These amended special conditions are issued for the Boeing Model 777 series airplanes. This amendment states that the Boeing Model 777 series airplanes oblique (side-facing) seats may be installed at an angle of 18 to 45 degrees to the airplane centerline and may include a 3-point or airbag restraint system, or both, for occupant restraint and injury protection. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features are oblique (side-facing) single-occupant passenger seats equipped with or without airbag devices or 3-point restraints. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Notice of Funding Opportunity for Positive Train Control Systems Grants Under the Consolidated Rail Infrastructure and Safety Improvements Program
This NOFO details the application procedures and requirements to obtain remaining grant funding for eligible positive train control (PTC) system projects of the Consolidated Rail Infrastructure and Safety Improvements (CRISI) Program as provided by the Consolidated Appropriations Act, 2018, (2018 Appropriation). The funding in this NOFO remains from the 2018 Appropriation after DOT selected applications submitted in response to an initial NOFO for PTC systems deployment published on May 18, 2018. The opportunity described in this notice is made available under Catalog of Federal Domestic Assistance (CFDA) number 20.325, ``Consolidated Rail Infrastructure and Safety Improvements.''
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
