Department of Transportation September 27, 2018 – Federal Register Recent Federal Regulation Documents
Results 1 - 8 of 8
Hours of Service
The FMCSA announces two additional public listening sessions on potential changes to its hours-of-service (HOS) rules for truck drivers. On August 23, 2018, FMCSA published an Advance Notice of Proposed Rulemaking (ANPRM) seeking public comment on four specific aspects of the HOS rules for which the Agency is considering changes: The short-haul HOS limit; the HOS exception for adverse driving conditions; the 30-minute rest break provision; and the sleeper berth rule to allow drivers to split their required time in the sleeper berth. In addition, the Agency requested public comment on petitions for rulemaking from the Owner-Operator Independent Drivers Association (OOIDA) and TruckerNation.org (TruckerNation). The Agency encourages vendors of electronic logging devices (ELDs) to participate to address potential implementation issues should changes to the HOS rules be made. The listening sessions will be held in Orlando, FL, and in Joplin, MO, and will be webcast for the benefit of those not able to attend in person. The listening sessions will allow interested persons to present comments, views, and relevant research on topics mentioned above. All comments will be transcribed and placed in the rulemaking docket for the FMCSA's consideration.
General Technical, Organizational, Conforming, and Correcting Amendments to the Federal Motor Carrier Safety Regulations
FMCSA amends its regulations by making technical corrections throughout the Federal Motor Carrier Safety Regulations. The Agency makes minor changes to correct inadvertent errors and omissions, remove or update obsolete references, and improve the clarity and consistency of certain regulatory provisions.
Broker and Freight Forwarder Financial Responsibility
FMCSA announces that it is initiating rulemaking action pertaining to the implementation of the Moving Ahead for Progress in the 21st Century Act (MAP-21). MAP-21 raised the financial security amount for brokers to $75,000 and, for the first time, established financial security requirements for freight forwarders. In this ANPRM, the Agency is considering eight separate areas: Group surety bonds/ trust funds, assets readily available, immediate suspension of broker/ freight forwarder operating authority, surety or trust responsibilities in cases of broker/freight forwarder financial failure or insolvency, enforcement authority, entities eligible to provide trust funds for form BMC-85 trust fund filings, Form BMC-84 and BMC-85 trust fund revisions, and household goods (HHG). The Agency seeks comments and data in response to this ANPRM.
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Rolls-Royce plc (RR) RB211-Trent 875-17, RB211-Trent 877-17, RB211- Trent 884-17, RB211-Trent 884B-17, RB211-Trent 892-17, RB211-Trent 892B-17, and RB211-Trent 895-17 turbofan engines. This AD was prompted by low-pressure compressor (LPC) case A-frame hollow locating pins that may have reduced integrity due to incorrect heat treatment. This AD requires replacement of the LPC case A-frame hollow locating pins. We are issuing this AD to address the unsafe condition on these products.
Proposed Amendment and Establishment of Multiple Air Traffic Service (ATS) Routes in the Vicinity of Houston, TX
This action proposes to modify 3 jet routes, 2 high altitude area navigation (RNAV) Q-routes, and 8 VHF Omnidirectional Range (VOR) Federal airways, and establish 4 low altitude RNAV T-routes in the vicinity of Houston, TX, due to the planned decommissioning of the Hobby, TX, VOR/Distance Measuring Equipment (VOR/DME) navigation aid (NAVAID), which provides navigation guidance for portions of the affected ATS routes
FAA Order 2150.3C, Compliance and Enforcement Program
This notice announces the availability of FAA Order 2150.3C, Compliance and Enforcement Program. The order contains the policies and procedures relevant to the Federal Aviation Administration's compliance and enforcement program. The order applies to the compliance and enforcement programs and activities of all FAA offices that have statutory and regulatory compliance and enforcement responsibilities. It includes policies and procedures the FAA has developed since the last comprehensive revision of the order in 2007. Expired and out-of- date policies and procedures have been removed. FAA Order 2150.3C provides a written statement of the Administrator's policy guidance for imposing sanctions for violations of statutory and regulatory requirements.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 707 airplanes, and Model 720 and 720B series airplanes. This AD was prompted by fuel system reviews conducted by the manufacturer. This AD requires revising the maintenance or inspection program to include new airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 2000 and FALCON 2000EX airplanes. This AD was prompted by reports of metallic debris found in the wing slat piccolo tubes; investigation revealed that the debris originated from the flow guide of the ball joint of the wing anti-ice valve. This AD requires repetitive inspections for metallic debris and damage of the flow guide of the ball joint of the wing anti-ice valve, and related investigative and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
