Department of Transportation February 2009 – Federal Register Recent Federal Regulation Documents

This action proposes to amend Class E airspace at Coleman, TX. Controlled airspace is necessary to accommodate Standard Instrument Approach Procedures (SIAPs) at Coleman Municipal Airport, Coleman, TX. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) aircraft operations at Coleman Municipal Airport.

We are adopting a new airworthiness directive (AD) for certain McDonnell Douglas airplanes listed above. This AD requires installing a dam assembly for the container of the fuel boost pump of the center tank located in the right main tank, and doing the related investigative actions, and corrective actions if necessary. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent the center tank fuel boost pump from operating in a fuel vapor zone and becoming a potential ignition source in the right main tank, potentially resulting in a fuel tank explosion and consequent loss of the airplane.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2009-0016 at https:// www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.- flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We propose to adopt a new Airworthiness Directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is superseding an existing airworthiness directive (AD) for General Electric Company (GE) CF6-80A, CF6-80C2, and CF6-80E1 series turbofan engines. That AD required revisions to the Airworthiness Limitations Section (ALS) of the manufacturer's Instructions for Continued Airworthiness (ICA) to include required inspection of selected critical life-limited parts at each piece-part exposure. This AD requires revisions to the CF6-80A, CF6-80C2, and CF6- 80E1 series engines ALS sections of the manufacturer's manuals and an air carrier's approved continuous airworthiness maintenance program to incorporate additional inspection requirements, and to update certain Engine Manual Inspection Task and Sub Task Number references. This AD results from the need to require enhanced inspection of selected critical life-limited parts of CF6-80A, CF6-80C2, and CF6-80E1 series engines. We are issuing this AD to prevent critical life-limited rotating engine part failure, which could result in an uncontained engine failure and damage to the airplane.

This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

In accordance with the Paperwork Reduction Act of 1995, PHMSA invites comments on certain information collections pertaining to pipeline safety for which PHMSA intends to request renewal from the Office of Management and Budget (OMB).

We are revising an earlier proposed airworthiness directive (AD) for all Boeing Model 747 airplanes. The original NPRM would have required inspecting for cracks in the left- and right-side Stringer 11 longeron adjacent to the horizontal stabilizer pivot bulkhead, and related investigative and corrective actions if necessary. The original NPRM resulted from a report of a crack found in the right-side Stringer 11 longeron horizontal flange, adjacent to the horizontal stabilizer pivot bulkhead, during a routine maintenance inspection. This action revises the original NPRM by reducing the compliance times for certain airplanes. We are proposing this supplemental NPRM to detect and correct fatigue cracking of the longeron, which can propagate and cause damage to the adjacent horizontal stabilizer pivot bulkhead. This damage could result in loss of structural integrity and consequent inability of the bulkhead to carry flight loads, which could adversely affect controllability of the airplane.

The FAA proposes to adopt a new airworthiness directive (AD) for Hamilton Sundstrand Propellers model 247F propeller assemblies with certain part number (P/N) and serial number (SN) blades. This proposed AD would require removing affected propeller blades from service. This proposed AD results from reports of blades with corrosion pits in the tulip area of the blades. We are proposing this AD to prevent cracks from developing in the tulip area of the blade, which could result in separation of the blade and possible loss of airplane control.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Models 182Q and 182R airplanes that are equipped with Societ[eacute] de Motorisations A[eacute]ronautiques (SMA) Aircraft Diesel Engine (ADE) Model SR305-230-1 or Model SR305-230 converted to Model SR305-230-1 installed under Supplemental Type Certificate (STC) SA03302AT. This AD requires you to remove the intercooler and the intercooler inlet and outlet hoses, install a reworked intercooler and new intercooler inlet and outlet hoses, inspect hoses and clamp torques, repetitively inspect installation of the intercooler outlet and inlet hose assemblies for any displacement or damage of clamps or hoses, and, if necessary, replace any damaged clamps or hoses. This AD results from a report of two instances of induction hose disconnection occurring while in service, resulting in a loss of turbo boost and a significant loss of engine power. We are issuing this AD to detect and correct improper intercooler outlet and intercooler inlet hose assembly installations, which could result in loss of turbo boost and a significant loss of engine power. This failure could lead to an inability to maintain constant altitude in flight.

This notice announces a public meeting of the FAA's Aviation Rulemaking Advisory Committee (ARAC) to discuss transport airplane and engine (TAE) issues.

The FAA is issuing this notice to advise the public of a meeting of the NextGen Mid-Term Implementation Task Force.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2009 0012 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.

Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatements of previously approved collections. This document describes one collection of information for which NHTSA intends to seek OMB approval.

This action establishes Class D airspace at Branson Airport, Branson, MO. The establishment of an air traffic control tower has made this action necessary for the safety of Instrument Flight Rule (IFR) operations at the airport.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2009-XXXX at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.