Federal Aviation Administration December 2017 – Federal Register Recent Federal Regulation Documents

This action proposes to amend Class E airspace designated as a surface area and amend Class E airspace extending upward from 700 feet above the surface at Muscatine Municipal Airport, Muscatine, IA. The FAA is proposing this action due to the decommissioning of the Port City VHF omnidirectional range (VOR) facility, which provided navigation guidance for the instrument procedures to this airport. The VOR has been decommissioned as part of the VOR Minimum Operational Network (MON) Program.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments concerning our intention to request the Office of Management and Budget (OMB) approval of a new generic information collection. As part of a Federal Government-wide effort to streamline the process to seek feedback from the public, FAA is requesting approval of a New Generic Information Collection Request: ``Generic Clearance for Customer Interactions''.

The FAA is issuing this notice to advise the public of a meeting of Fifty Fourth RTCA SC-224 Standards for Airport Security Access Control Systems Plenary.

These special conditions are issued for the Light Helicopter Turbine Engine Company (LHTEC), CTS800-4AT turboshaft engine model. This engine model will have a novel or unusual design feature associated with a 30-minute all engines operating (AEO) power rating. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We propose to adopt a new airworthiness directive (AD) for certain Zodiac Seats France, 536 Series Cabin Attendant Seats. This proposed AD was prompted by cracks found in a highly concentrated stress area of the seat pan hinges. This proposed AD would require repetitive inspections and replacement of the seat pan. We are proposing this AD to correct the unsafe condition on these products.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The FAA is considering a request from the State of Montana to release certain deed restrictions at the Yellowstone Airport, MT.

We are adopting a new airworthiness directive (AD) for the Enstrom Helicopter Corporation (Enstrom) Model F-28, F-28A, F-28C, F- 28C-2, F-28C-2R, F-28F, F-28F-R, TH-28, 280, 280C, 280F, 280FX, 480, and 480B helicopters. This AD requires inspecting certain rod end bearing assemblies. This AD is prompted by an accident. The actions of this AD are intended to prevent an unsafe condition on these helicopters.

This action announces changes in ADS-B services, including Traffic Information ServiceBroadcast (TIS-B), for a small number of aircraft. The FAA is implementing a filter for certain ADS-B equipped aircraft broadcasting erroneous or improper information when the broadcast information could affect the safe provision of air traffic services. Any aircraft subject to the filter will not have its ADS-B information sent to an air traffic control (ATC) facility nor will the aircraft be a client for TIS-B services. Affected aircraft will continue to receive ATC services within radar coverage using secondary radar information.

We are adopting a new airworthiness directive (AD) for certain General Electric Company (GE) GEnx-1B64/P2, -1B67/P2, -1B70/P2, -1B70/ 75/P2, -1B70C/P2, and -1B74/75/P2 turbofan engines. This AD was prompted by a report of the failure of the high-pressure turbine (HPT) stage 1 blade retainer and subsequent in-flight shutdown of the engine. This AD requires inspection of the HPT stage 1 blade retainer. We are issuing this AD to address the unsafe condition on these products.

This action proposes to amend controlled airspace at Pocatello Regional Airport, Pocatello, ID, by amending Class D airspace and Class E airspace designated as a surface area; removing Class E airspace designated as an extension to a Class D or E surface area; and amending Class E airspace extending upward from 700 feet above the surface. Also, this action would update the airport's geographic coordinates for the associated Class D and E airspace areas to reflect the FAA's current aeronautical database. Additionally, reference to the Pocatello VHF Omnidirectional Range/Tactical Air Navigation (VORTAC) would be removed from the Class E airspace extending upward from 700 feet above the surface description. This proposal would enhance the safety and management of instrument flight rules (IFR) operations at the airport.

This action removes Class E airspace extending upward from 700 feet above the surface at Skyway Estates Airport, Eaton Rapids, MI. The cancellation of the standard instrument approach procedures at the airport has resulted in the airspace no longer being required.

We propose to supersede Airworthiness Directive (AD) 2013-19- 12 for GA 8 Airvan (Pty) Ltd Models GA8 and GA8-TC320 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the fuel system integral sump tank does not meet FAA regulations. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

We are adopting a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 2000EX airplanes. This AD was prompted by a quality review of delivered airplanes, which identified a manufacturing deficiency of some engine air inlet anti-ice ``piccolo'' tubes. This AD requires inspecting each anti-ice ``piccolo'' tube assembly of certain engine air inlets for discrepancies, and doing corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of cracking in the webs of the stub beams at certain fuselage stations. These cracks are the result of fatigue caused by cyclical loading from pressurization, wing loads, and landing loads. This AD requires repetitive inspections for cracking of the webs of the stub beams at certain fuselage stations, and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.

The FAA is issuing this notice to advise the public of a meeting of Thirteenth RTCA SC-230 Airborne Weather Detection Systems Plenary.

We propose to supersede airworthiness directive (AD) 2016-03- 03 that applies to all Rolls-Royce plc (RR) Viper Mk. 521, Viper Mk. 522, and Viper Mk. 601-22 turbojet engines. AD 2016-03-03 requires reducing the life of certain critical parts. Since we issued AD 2016- 03-03, RR determined that additional parts for these RR Viper engine models are affected. This proposed AD would add additional engine parts to the applicability. We are proposing this AD to address the unsafe condition on these products.

This action amends the Special Federal Aviation Regulation (SFAR) that prohibits certain flights in specified areas of the Sanaa (OYSC) Flight Information Region (FIR) by all: United States (U.S.) air carriers; U.S. commercial operators; persons exercising the privileges of an airman certificate issued by the FAA, except when such persons are operating U.S.-registered aircraft for a foreign air carrier; and operators of U.S.-registered civil aircraft, except where the operator of such aircraft is a foreign air carrier. There has been a reduction in the level of risk to U.S. civil aviation operations in limited portions of the specified areas of the Sanaa (OYSC) Flight Information region (FIR) where the FAA had prohibited flight operations under the SFAR. As a result, the FAA is reducing the amount of airspace in the Sanaa (OYSC) FIR in which U.S. civil aviation operations are prohibited. However, there continues to be an unacceptable level of risk to U.S. civil aviation operations in the remainder of the specified areas of the Sanaa (OYSC) FIR, as described in this rule, resulting from terrorist and militant activity. Consequently, the FAA is also amending this SFAR to extend its expiration date. The FAA is also republishing, with minor revisions, the approval process and exemption information for this SFAR.

We are adopting a new airworthiness directive (AD) for Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. This AD was prompted by a report of an engine multiple fan blade-off (MFBO) event, caused by engine fan flutter. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Alexander Schleicher GmbH & Co. Segelflugzeugbau Models ASH 25M and ASH 26E gliders. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as fatigue cracks found on the exhaust silencer. We are issuing this AD to require actions to address the unsafe condition on these products.

We propose to supersede Airworthiness Directive (AD) 2015-15- 13, which applies to certain Airbus Model A319 series airplanes; Model A320-211, -212, -214, -231, -232, and -233 airplanes; and Model A321- 111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2015- 15-13 requires modification of the potable water service panel and waste water service panel, including doing applicable related investigative and corrective actions. Since we issued AD 2015-15-13, further investigations linked to widespread fatigue damage (WFD) analysis highlighted that, to meet the WFD requirements, it is necessary that the affected modification not be accomplished before reaching a certain threshold. This proposed AD would require modification of the waste water and potable water service panels with new compliance times. This proposed AD would also remove certain airplanes from the applicability and add Model A320-216 airplanes to the applicability. We are proposing this AD to address the unsafe condition on these products.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.