Federal Aviation Administration 2010 – Federal Register Recent Federal Regulation Documents

This action corrects an error in the notice of meetings published in the Federal Register on Tuesday, November 30, 2010, concerning a proposal to revise Class B airspace at Philadelphia, PA. The name and phone number of the person to contact for further information has changed from that published in the notice.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 22, 2010, vol. 75, no. 183, page 57829. The respondents to this information collection are CFR Part 135 and Part 121 operators. The FAA uses the information to ensure compliance and adherence to the regulations.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 22, 2010, vol. 75, no. 183, pages 57827-57828. The information collected is needed to determine applicant eligibility and compliance for certification of Civil Aviation mechanics and operation of aviation mechanic schools.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

We are adopting a new airworthiness directive (AD) for the Kaman Model K-1200 helicopters. This AD requires revising the Limitations section of the Instructions for Continued Airworthiness (ICA) by establishing a life limit of 8,000 hours time-in-service (TIS) for each main rotor blade (blade) set. Also, this AD requires removing each blade set from service if it has accumulated 8,000 or more hours time-in-service (TIS). This AD also requires replacing certain blade sets with airworthy blade sets at specified intervals based on the blade set serial number (S/N). This AD was prompted by an accident and the subsequent discovery of cracks in multiple blade spars. We are issuing this AD to prevent blade failure and subsequent loss of control of the helicopter.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This notice announces the availability of and request for public comments on the proposed new delegation programs (2) that will allow organizations to perform additional functions under the Federal Aviation Administration (FAA) Organization Designation Authorization (ODA) program. These two proposed ODA programs will provide: (1) Certification functions for rotorcraft-external load operator certificates under 14 CFR part 133 and (2) the delivery of written airman knowledge tests.

This action amends Class E surface airspace, and airspace extending upward from 700 feet above the surface, and removes Class E airspace designated as an extension to Class D surface area at Vero Beach Municipal Airport, Vero Beach, FL. The Vero Beach Non-Directional Beacon (NDB) has been decommissioned and new Standard Instrument Approach Procedures (SIAPs) have been developed for the airport. This action also updates the geographic coordinates of the St. Lucie County International Airport to aid in the navigation of our National Airspace System.

This action establishes Class E Airspace at Crewe, VA, to accommodate the additional airspace needed for the Standard Instrument Approach Procedures (SIAPs) developed for Crewe Municipal Airport. This action enhances the safety and airspace management of Instrument Flight Rules (IFR) operations at the airport.

This supplemental NPRM revises an earlier proposed airworthiness directive (AD), for Honeywell International LTS101-600A series and LTS101-700D-2 turboshaft engines, and LTP101-600A-1A and LTP101-700A-1A turboprop engines with power turbine blades, part number (P/N) 4-141-084-06, installed. That proposed AD would have required removing power turbine blades, P/N 4-141-084-06 from service, using a drawdown schedule specified in that proposed AD. That proposal was prompted by reports of fatigue cracks in the airfoil of the power turbine blade. This action revises the proposed rule by expanding and clarifying the applicability to include more engine models and power turbine blade P/Ns that could have the unsafe condition, and by clarifying the applicability by specifying power turbine rotor P/Ns instead of the blade P/Ns. The actions specified by this proposed AD are intended to prevent fracture of the power turbine blade airfoil, which could result in sudden loss of engine power and prevent continued safe flight or safe landing.

The FAA proposes to rule and invites public comment on the release of land at New Century AirCenter under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21).

This action proposes to amend Class E airspace at Kenton, OH. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAP) at Hardin County Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.

The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program submitted by the city of Fort Worth, Texas under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR Part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). On September 7, 2006, the FAA determined that the noise exposure maps submitted by the city of Fort Worth, Texas under Part 150 were in compliance with applicable requirements. Subsequent to this determination, the future condition noise exposure map was revised to reflect additional military operations proposed by the Department of Defense. This revision delayed acceptance of the future condition noise exposure map until May 5, 2009. On December 1, 2010, the FAA approved the Fort Worth Alliance Airport noise compatibility program. Most of the recommendations of the program were approved. No program elements relating to new or revised flight procedures for noise abatement were proposed by the city of Fort Worth.

We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires adding two new indicator lights on a certain panel to inform the captain and first officer of a low pressure condition in the left and right override/jettison pumps of the center wing tanks. This AD also requires replacing the left and right override/jettison switches on the M154 fuel control module on the P4 panel with improved switches and doing the associated wiring changes. This AD also requires, for certain airplanes, installation of a mounting bracket for the new indicator lights. This AD also requires a revision to the maintenance program to incorporate airworthiness limitation No. 28-AWL-22. This AD also requires a revision to the airplane flight manual to advise the flightcrew what to do in the event that the pump low pressure light on the flight engineer's panel does not illuminate when the pump is selected off. This AD was prompted by fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent uncommanded operation of the override/jettison pumps of the center wing tanks, and failure to manually shut off the override/ jettison pumps at the correct time, either of which could lead to an ignition source inside the center wing tank. This condition, in combination with flammable fuel vapors, could result in a center fuel tank explosion and consequent loss of the airplane.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD would require installing a full authority digital engine control (FADEC) backup battery, replacing the supplement pilot's operating handbook and FAA approved airplane flight manual, and replacing the FADEC backup battery every 12 calendar months. This proposed AD was prompted by an incident where an airplane experienced an in-flight engine shutdown caused by a momentary loss of electrical power to the FADEC. We are proposing this AD to prevent interruption of electrical power to the FADEC, which could result in an uncommanded engine shutdown. This failure could lead to a loss of engine power.

The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Model 747 airplanes. The existing AD currently requires repetitive inspections to detect damage of the sleeving and wire bundles of the boost pumps of the numbers 1 and 4 main fuel tanks, and of the auxiliary tank jettison pumps (if installed); replacement of any damaged sleeving with new sleeving; and repair or replacement of any damaged wires with new wires. For airplanes on which any burned wires are found, the existing AD also requires an inspection to detect damage of the conduit, and replacement of any damaged conduit with a serviceable conduit. This proposed AD would reduce the initial compliance time and repetitive inspection interval in the existing AD. This proposed AD results from fleet information indicating that the repetitive inspection interval in the existing AD is too long because excessive chafing of the sleeving continues to occur much earlier than expected between scheduled inspections. We are proposing this AD to detect and correct abrasion of the Teflon sleeving and wires in the bundles of the fuel boost pumps for the numbers 1 and 4 main fuel tanks and of the auxiliary tank jettison pumps (if installed), which could result in electrical arcing between the wires and aluminum conduit and consequent fire or explosion of the fuel tank.

The FAA hereby provides notice of intent to release certain airport properties 2.71 acres at the Orlando Executive Airport, Orlando, FL from the conditions, reservations, and restrictions as contained in a Quitclaim Deed agreement between the FAA and the City of Orlando, dated September 30, 1955. The release of property will allow the Greater Orlando Aviation Authority to dispose of the property for other than aeronautical purposes. The property is located adjacent to Crystal Lake Drive in Orange County, Florida. The parcel is currently designated as non-aeronautical use. The property will be released of its federal obligations to swap the land for another City-owned parcel. The 1.71 acre parcels to be acquired is also located adjacent to Crystal Lake Drive in Orange County, Florida. This parcel is adjacent to airport property. The fair market value of the airport-obligated parcels has been determined by appraisal to be 1,843,400. The fair market value of the non-obligated parcels has been determined by appraisal to be 2,155,110. Documents reflecting the Sponsor's request are available, by appointment only, for inspection at the offices of the Greater Orlando Aviation Authority at Orlando International Airport, and the FAA Airports District Office.

These special conditions are issued for the Sikorsky Aircraft Corporation (Sikorsky) model S-92A helicopter. This helicopter, as modified by Sikorsky, will have novel or unusual design features associated with installing an optional SAR AFCS. The applicable airworthiness standards do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards the Administrator considers necessary to show a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes to revise Class E airspace at Platinum AK. The creation of a new Standard Instrument Approach Procedure (SIAP) at the Platinum Airport has made this action necessary to enhance safety and management of Instrument Flight Rules (IFR) operations.

The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps for Manchester-Boston Regional Airport, as submitted by the City of Manchester, New Hampshire, under the provisions of Title I of the Aviation Safety and Noise Abatement Act of 1979 (Pub. L. 96-193) and 14 CFR part 150, are in compliance with applicable requirements.

The FAA proposes to supersede an existing airworthiness directive (AD) for General Electric (GE) CF6-45/-50 series and CF6-80A series turbofan engines with certain part number (P/N) side links of the five-link forward mount assembly installed. That AD currently requires an initial and repetitive visual inspection of the side links for cracks, and stripping and reapplying the Sermetel W coating on the side link at every exposure of the side link. That AD also requires replacing the side links and pylon attachment bolts, and inspecting the fail-safe bolt and platform lug if the side links are cracked. This proposed AD would continue to require those same inspections and stripping and reapplying the Sermetel W coating, and would add two part numbers to the applicability. This proposed AD results from a review of the inspection program, which revealed that GE had omitted two affected part numbers from the applicability. We are proposing this AD to prevent failure of the side links and possible engine separation from the airplane.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This action proposes to establish six High Altitude Area Navigation (RNAV) routes in the Western United States (U.S.). These new routes would provide pilots and air traffic controllers with efficient direct routes enhancing safety and improving the efficient use of the National Airspace System (NAS).