Department of Transportation 2013 – Federal Register Recent Federal Regulation Documents

We are adopting a new airworthiness directive (AD) for various aircraft equipped with Rotax Aircraft Engines 912 A Series Engine. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as oil leaks in the intake channel in the area of the valve guide on some cylinder heads could increase the oil consumption and result in engine stoppage. We are issuing this AD to require actions to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Eurocopter France (Eurocopter) Model AS350 and AS355 helicopters. This AD requires inspecting the tail rotor control stop screws to determine if they are correctly aligned and adjusting the screws if they are misaligned. This AD is prompted by the discovery of a loose nut on the tail rotor control stop and a misaligned tail rotor control stop screw. The actions of this AD are intended to detect a loose nut or a misaligned stop screw, which, if not corrected, could limit yaw authority, and consequently, result in a loss of helicopter control.

Notice is hereby given of a meeting of the Rail Energy Transportation Advisory Committee (RETAC), pursuant to the Federal Advisory Committee Act (FACA), 5 U.S.C. app. 2 10(a)(2).

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and approval. The nature of the information collection is described as well as its expected burden. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 3, 2013. No comments were received.

This document revises the list of vehicles not originally manufactured to conform to the Federal Motor Vehicle Safety Standards (FMVSS) that NHTSA has decided to be eligible for importation. This list is published in an appendix to the agency's regulations that prescribe procedures for import eligibility decisions. The list has been revised to add all vehicles that NHTSA has decided to be eligible for importation since October 1, 2012, and to remove all previously listed vehicles that are now more than 25 years old and need no longer comply with all applicable FMVSS to be lawfully imported. NHTSA is required by statute to publish this list annually in the Federal Register.

FMCSA announces that the Agency has begun using the Uniform Fine Assessment (UFA) Version 4.0 software to calculate the amounts of civil penalties for violations of the Federal Motor Carrier Safety Regulations (FMCSRs) and Hazardous Materials Regulations (HMRs). FMCSA is required to consider certain statutory factors when proposing civil penalties for violations of the FMCSRs and HMRs and since the mid- 1990's FMCSA has used its UFA software to consider those statutory factors. FMCSA has updated the UFA software to ensure that it adequately considers the statutory penalty factors for all statutes and regulations enforced by FMCSA; to implement the Agency's policy for consideration of the Small Business Regulatory Enforcement Fairness Act; and, to ensure uniformity in proposed civil penalties. UFA 4.0 software also considers the factors set forth in 49 U.S.C. 521(b)(2)(D) for violations of regulations where no statutory factors are otherwise specified by statute. To enhance transparency of the civil penalty calculation, UFA 4.0 generates a report detailing the calculations used to propose civil penalties. While UFA 4.0 is used to calculate the majority of civil penalties proposed by FMCSA, the Agency may propose a civil penalty outside of UFA 4.0 when the proposed civil penalty calculated by UFA 4.0 would not promote enhanced commercial motor vehicle safety or induce prompt and sustained compliance. In such cases, the Agency will nevertheless consider the applicable statutory factors to assess a penalty. This Federal Register Notice supersedes the Federal Register Notice issued by FMCSA entitled, ``Civil Penalty Calculation Methodology. '' 76 FR 71431, November 17, 2011.

We are superseding airworthiness directive (AD) 2012-10-12 for all RR RB211-Trent 553-61, 553A2-61, 556-61, 556A2-61, 556B-61, 556B2- 61, 560-61, 560A2-61, 768-60, 772-60, 772B-60, 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17, and 895-17 turbofan engines. AD 2012-10-12 required inspecting the intermediate-pressure (IP) compressor rotor shaft rear balance land for cracks. We are issuing this AD to require inspections of the IP compressor rotor shaft, as required by AD 2012- 10-12, to add on-wing inspections for the Trent 500 engines, and to add on-wing and in-shop inspections for the Trent 900 engines. This AD was prompted by detection of a crack in a Trent 500 IP compressor rotor shaft rear balance land during a shop visit. Further engineering evaluation, done by RR, concluded that the cracking may also exist in Trent 900 engines. We are issuing this AD to detect cracking on the IP compressor rotor shaft rear balance land, which could lead to uncontained engine failure and damage to the airplane.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a new information collection. This notice corrects a notice published in the Federal Register on July 31, 2013 (78 FR 46405) to change the word ``airplane'' to ``aircraft'' in the provided survey questions, and to extend the comment period. The collection involves an assessment of the number of ferry flights typically conducted by on-demand air carriers and the costs associated with those flights. The information to be collected will be used to conduct a benefit cost analysis in connection with rulemaking as required by Congress.

This NPRM provides interested parties with the opportunity to comment on proposed regulations that would govern the application requirements for the Surface Transportation Project Delivery Program (Program). The proposed regulations are prompted by enactment of the Moving Ahead for Progress in the 21st Century Act (MAP-21), which converted the Surface Transportation Project Delivery Pilot Program into a permanent program, allows any State to apply for the Program, expanded the scope of the Secretary's responsibilities that may be assigned and assumed under the Program, and created a renewal process for Program participation. The FHWA, FTA, and FRA, hereinafter referred to as the ``Agencies,'' seek comments on the proposals contained in this NPRM.

We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200 and -300 series airplanes; Model A340-200 and - 300 series airplanes; and Model A340-541 and -642 airplanes. This final rule was prompted by reports of wing tip brakes (WTBs) losing their braking function in service due to heavy wear on the brake discs. WTBs are designed to stop and hold the mechanical transmission of slats and flaps in certain failure cases. This final rule requires repetitive operational tests of certain WTB pressure-off-brakes (POBs) for performance on the flap and slat systems, and replacement of any affected WTB with a new or serviceable part if the test fails. This final rule also requires eventual replacement of all affected WTBs with a new part, which terminates the repetitive tests. We are issuing this final rule to prevent loss of the WTB braking function, and consequent inability of the flap or slat system to be stopped and held in position during operation, which could result in loss of control of the airplane.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by reports of advance pneumatic detectors (APDs) for engine fire/ overheat detector assemblies failing to reset after activation due to permanent deformation of the detector switch diaphragm after being exposed to high temperatures. This AD requires replacing all three APDs with new detector assemblies. We are issuing this AD to prevent a continued engine fire indication in the cockpit after the actual fire has been extinguished, which is misleading and might influence the pilot to conduct a potentially hazardous ``off-airport'' landing.

Pursuant to Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463, 5 U.S.C. App. 2), and 5 U.S.C. 552b(c), notice is hereby given of a special closed session of the Commercial Space Transportation Advisory Committee (COMSTAC). The special closed session will be an administrative session for the Committee members to review the provisions of the COMSTAC Charter; the Federal Advisory Committee Act (FACA); 41 CFR, Parts 101-6 and 102-3; and the Department of Transportation and FAA Orders concerning advisory committee management. The meeting will take place on Thursday, October 10, 2013, at the National Housing Center, 1201 15th Street NW., Washington, DC 20005, from 2:00 p.m. until 3:00 p.m.

This document denies a rulemaking petition submitted by BMW Group, BMW of North America, LLC, to amend the Federal motor vehicle safety standard on occupant crash protection to permit optional certification using a seat belt interlock for front seat occupants as an alternative to the unbelted crash test requirements. The agency is denying the petition because the supporting material provided by the petitioner is not sufficient for the agency to fully evaluate the safety need, benefits, effectiveness, and acceptability of seat belt interlock systems. Furthermore, in 2012, the agency initiated the development of a research program on seat belt interlocks in light of its newly-acquired statutory authority to allow consideration of seat belt interlocks as a compliance option. The agency believes that making a determination to amend its performance standards prior to the completion of its research is premature.

This document grants in full Fuji Heavy Industries U.S.A., Inc.'s (FUSA) petition for exemption of the Subaru [confidential] vehicle line in accordance with 49 CFR part 543, Exemption from the Theft Prevention Standard. This petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Theft Prevention Standard 49 CFR part 541, Federal Motor Vehicle Theft Prevention Standard. FUSA requested confidential treatment for specific information in its petition. The agency has addressed FUSA's request for confidential treatment by letter dated June 28, 2013. However, FUSA has stated that it will provide the agency with the nameplate of the vehicle prior to its introduction for sale into commerce in order to allow the agency to notify law enforcement agencies and the public of a new vehicle line exempted from the parts- marking requirements of the Theft Prevention Standard.

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), on January 23, 2013 (78 FR 4986), the agency published a notice in the Federal Register soliciting public comment on the proposed Information Collection Request (ICR) abstracted below. In further compliance, the agency now publishes this additional notice announcing that the information collection request has been forwarded to the Office of Management and Budget (OMB) for review and comment.

This action establishes two new low-altitude RNAV routes, designated T-287 and T-299, to enhance the flow of air traffic to the west of the Washington-Dulles International Airport. Also, there is a name change to one of the navigation fixes; an adjustment to the coordinates of another navigation fix, and a change from a waypoint to a fix for a navigation point.

The Federal Aviation Administration is requesting public comment on the Penn Yan Airport (PEO), Penn Yan, New York, Notice of Proposed Release from Aeronautical Use of approximately 0.069 +/- acres of airport property, to allow for non-aeronautical development. The parcel is located on the northwest corner of the Penn Yan Airport. The tract currently consists of 0.069 +/- acres of land and it is currently vacant. The requested release is for the purpose of permitting the airport owner (Yates County) to grant an easement of 0.069 +/-acres for ingress/egress to a boat storage and maintenance facility to be constructed by Land and Sea Properties on airports lands previously released. The proposed 50' +/- wide by 60.11' +/-easement is required to comply with the Town of Milo requirement to provide emergency equipment ingress/egress to the Land and Sea Properties boat storage and maintenance facility from the Penn Yan Airport access road. Documents reflecting the Sponsor's request are available, by appointment only, for inspection at the Office of the Yates County Legislature and the FAA New York Airport District Office.

The Federal Transit Administration (FTA) and the Metropolitan Atlanta Rapid Transit Authority (MARTA) issue this early scoping notice to advise other agencies and the public that they intend to explore potential alternatives for providing high-capacity transit in the GA 400 corridor in north Fulton County, GA from Dunwoody to Alpharetta that would improve transit linkages and coverage to communities within this corridor and would enhance mobility and accessibility to and within the corridor by providing a more robust transit network that offers an alternative to automobile travel. This notice invites the public and agency officials to help support the ongoing alternatives analysis and system planning effort by commenting on the project's purpose and need, the project study area, the alternatives being considered, the transportation problems that are being addressed by the alternatives analysis study, public participation and outreach methods, the relevant transportation and community impacts and benefits being considered, known environmental issues raised by public and agency coordination to date, and the projected capital and operating costs of this project. The early scoping process is intended to support the alternatives analysis and a future National Environmental Policy Act (NEPA) scoping process and will help streamline the future development of an environmental impact statement (EIS), if warranted. In addition, it supports FTA planning requirements associated with the New Starts (``Section 5309'') funding program for certain kinds of major capital investments. While recent legislation has led to changes in the New Starts process, MARTA will comply with all relevant FTA requirements relating to planning and project development to help analyze and screen alternatives in preparation for the NEPA process. Public meetings are described immediately below. A more detailed discussion of the project and this early scoping process is included in sections that follow.

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 series airplanes. This proposed AD was prompted by a report of a pilot commanding an in-flight engine shut down in response to a low oil pressure warning indication. Further investigation revealed the mounting studs in the engine mounted alternating current (AC) generator mounting plate were pulled out of position and the threaded interface in the plate was corroded. This proposed AD would require repetitive inspections for discrepancies on certain AC generator mounting adapters, and replacing discrepant adapters with serviceable ones. This proposed AD would also require revising the maintenance program to incorporate a repetitive task specified in certain temporary revisions. We are proposing this AD to detect and correct corrosion in the AC generator mounting plate, which could result in a gap between the AC generator and the generator mounting plate, and cause loss of engine oil and consequent engine failure.

The FAA is correcting a final rule published on July 15, 2013 (78 FR 42324). In that final rule, which became effective on the date of publication, the FAA amended its regulations to create new certification and qualification requirements for pilots in air carrier operations. The FAA inadvertently listed an incorrect amendment number for that final rule. This document corrects that error.

This notice contains a summary of a petition seeking relief from specified requirements of FAA'S regulations. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.