Occupational Safety and Health Administration – Federal Register Recent Federal Regulation Documents
Results 551 - 600 of 1,810
Department of Labor Federal Civil Penalties Inflation Adjustment Act Annual Adjustments for 2020
The U.S. Department of Labor (Department) is publishing this final rule to adjust for inflation the civil monetary penalties assessed or enforced by the Department, pursuant to the Federal Civil Penalties Inflation Adjustment Act of 1990 as amended by the Federal Civil Penalties Inflation Adjustment Act Improvements Act of 2015 (Inflation Adjustment Act). The Inflation Adjustment Act requires the Department to annually adjust its civil money penalty levels for inflation no later than January 15 of each year. The Inflation Adjustment Act provides that agencies shall adjust civil monetary penalties notwithstanding Section 553 of the Administrative Procedure Act (APA). Additionally, the Inflation Adjustment Act provides a cost- of-living formula for adjustment of the civil penalties. Accordingly, this final rule sets forth the Department's 2020 annual adjustments for inflation to its civil monetary penalties.
Student Data Form; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements contained in the Student Data Form.
The 1,3-Butadiene Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the 1,3-Butadiene (BD) Standard.
OSHA's Conflict of Interest and Disclosure Form; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements contained in the proposed Conflict of Interest (COI) and Disclosure Form, which will be used to determine whether or not a conflict of interest exists for a potential peer review panel member.
Walking-Working Surfaces, Personal Protective Equipment (Fall Protection Systems), and Special Industries (Electric Power Generation, Transmission, and Distribution); Corrections
OSHA is issuing corrections to the Walking-Working Surfaces, Personal Protective Equipment, and Special Industries standards.
State Plans: Coverage of the Aircrews in Aircraft Regulated by the Federal Aviation Administration-Changes to Level of Federal Enforcement for Alaska, Arizona, California, Hawaii, Indiana, Iowa, Kentucky, Maryland, Michigan, Minnesota, Nevada, New Mexico, North Carolina, Oregon, Puerto Rico, South Carolina, Tennessee, Utah, Vermont, Virginia, Washington, and Wyoming
This document provides notice of the declination of coverage over the working conditions of aircraft cabin crewmembers onboard aircraft in operation by all twenty-two (22) OSHA-approved State Plans which cover the private sector. On March 26, 2014, OSHA began applying three safety and health standards to the working conditions of aircraft cabin crewmembers on aircraft in operation. Section 18 of the Occupational Safety and Health Act of 1970, 29 U.S.C. 667 (OSH Act) grants the OSHA-approved State Plans the authority to regulate the working conditions of these employees to the extent consistent with the Federal Aviation Act. Subsequently, OSHA required the State Plans to either elect to amend their State Plans to cover aircraft cabin crewmembers on aircraft in operation, or to decline to exercise such authority, in which case coverage would remain a Federal OSHA responsibility. All affected State Plans declined. OSHA is hereby amending the State Plans' coverage in all of the twenty-two (22) OSHA- approved State Plans covering the private sector to reflect the declination of State Plan coverage, and the continuation of Federal OSHA enforcement authority over the working conditions of aircraft cabin crewmembers while they are onboard aircraft in operation, and notifying affected employers and employees of this action.
Regulations Containing Procedures for Handling of Retaliation Complaints; Revision of Approved Information Collection (Paperwork) Requirements for Office of Management and Budget (OMB) Approval
OSHA solicits public comments concerning the proposal to extend and revise the collection of information currently approved by the Office of Management and Budget (OMB) for handling of retaliation complaints filed with OSHA under various whistleblower protection statutes and the procedural regulations described in this notice. These regulations contain procedures employees must use to file a complaint with OSHA alleging that their employer violated a whistleblower protection provision contained in certain statutes that generally prohibit retaliatory action by employers against employees who engage in activities protected by the statutes. This collection of information includes revisions to the electronic form for employees to submit retaliation complaints to OSHA.
The Asbestos in Shipyards Standard; Extension of the Office of Management and Budget's Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Asbestos in Shipyards Standard.
The Cadmium in Construction Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Cadmium in Construction Standard.
The Benzene Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Benzene Standard.
Occupational Exposure to Noise Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the collection of information contained in the Occupational Exposure to Noise Standard.
Standard for Welding, Cutting, and Brazing; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Standard for Welding, Cutting, and Brazing.
National Advisory Committee on Occupational Safety and Health (NACOSH): Notice of Membership Meeting
NACOSH will meet on December 12, 2019, in Washington, DC.
The Standard on 4,4′-Methylenedianiline for General Industry; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Standard on 4,4'- Methylenedianiline (MDA) for General Industry.
Hazardous Wastes Operations and Emergency Response (HAZWOPER) Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Hazardous Waste Operations and Emergency Response (HAZWOPER) Standard.
Additional Requirements for Special Dipping and Coating Operations (Dip Tanks); Extension of the Office of Management and Budget's (OMB) Approval of the Information Collection (Paperwork) Requirement
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget (OMB) approval of the information collection requirement specified in the Standard on Dipping and Coating Operations (Dip Tanks).
SGS North America, Inc.: Applications for Expansion of Recognition and Proposed Modification to the NRTL Program's List of Appropriate Test Standards
In this notice, OSHA announces the application of SGS North America, Inc., for expansion of the scope of recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the agency's preliminary finding to grant the application. Additionally, OSHA proposes to add three test standards to the NRTL Program's list of appropriate test standards.
Modification to the List of Appropriate NRTL Program Test Standards and the Scopes of Recognition of Several NRTLs
In this notice, OSHA announces the final decision to: (1) Add a new test standard to the Nationally Recognized Testing Laboratories (NRTL) Program's list of appropriate test standards and (2) update the scopes of recognition of several NRTLs.
Preparations for the 38th Session of the UN Sub-Committee of Experts on the Globally Harmonized System of Classification and Labelling of Chemicals (UNSCEGHS)
This notice is to advise interested persons that on Tuesday, November 12, 2019, OSHA will conduct a public meeting to discuss proposals in preparation for the 38th session of the United Nations Sub-Committee of Experts on the Globally Harmonized System of Classification and Labelling of Chemicals (UNSCEGHS) to be held December 11 through December 13, 2019, in Geneva, Switzerland. OSHA, along with the U.S. Interagency Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Coordinating Group, plans to consider the comments and information gathered at this public meeting when developing the U.S. Government positions for the UNSCEGHS meeting. OSHA also will give an update on the Regulatory Cooperation Council (RCC).
Cadmium in General Industry Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend OMB approval of the information collection requirements specified in the Cadmium in General Industry Standard.
TUV Rheinland of North America, Inc.: Application for Expansion of Recognition
In this notice, OSHA announces the application of TUV Rheinland of North America, Inc. (TUVRNA) for expansion of recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the agency's preliminary finding to grant the application.
Maritime Advisory Committee for Occupational Safety and Health (MACOSH): Notice of Meeting
This Federal Register notice announces meetings of the Maritime Advisory Committee for Occupational Safety and Health (MACOSH) workgroups and full Committee on November 19 and 20, 2019 in Washington, DC.
Agency Information Collection Activities: Announcement of the Office of Management and Budget (OMB) Control Numbers Under the Paperwork Reduction Act
The Occupational Safety and Health Administration announces that OMB extended approval for information collection requirements found in OSHA's standards and regulations outlined in this notice. OSHA sought approval of these requirements under the Paperwork Reduction Act of 1995 (PRA), and, as required by that Act, is announcing the approval numbers and expiration dates for these requirements and regulations.
Hexavalent Chromium Standards; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend OMB approval of the information collection requirements specified in the Hexavalent Chromium standards for General Industry, Shipyard Employment, and Construction.
Agency Information Collection Activities: Announcement of the Office of Management and Budget (OMB) Control Numbers Under the Paperwork Reduction Act
Comporting with Executive Order 13563, ``Improving Regulations and Regulatory Review,'' and consistent with Executive Order 13777, ``Enforcing the Regulatory Reform Agenda,'' OSHA removed or revised outdated, duplicative, unnecessary, and inconsistent requirements in safety and health standards. Standards Improvement ProjectPhase IV (SIP-IV) was published May 14, 2019 (84 FR 21416, Docket Number OSHA- 2012-0007). This final rule reduces regulatory burden while maintaining or enhancing worker safety and health, and improving privacy protections. The Occupational Safety and Health Administration announces an OMB extension of approval for a number of information collection requirements found in the final rule. OSHA sought approval of these requirements under the Paperwork Reduction Act of 1995 (PRA), and, as required by that Act, is announcing the approval numbers and expiration dates for these requirements.
Online Delivery of OSHA's Outreach Training Program 10- and 30-Hour Courses
OSHA requests information, comments, and documents that would assist the agency in determining whether to adopt a new online delivery model for OSHA's Outreach Training Program. The OSHA Outreach Training Program is a hazard awareness training program that educates participants on the recognition, abatement, and prevention of job- related hazards in the construction, general, and maritime industries, and at disaster sites. The potential new model would be limited to OSHA's 10- and 30-hour Outreach courses for the construction, general, and maritime industries. The new model would not include the disaster site worker training program. OSHA plans to use the information collected from this request to determine whether the new model would address issues associated with the existing model. If the new model were implemented, the agency would develop policies and procedures for the online Outreach Training Program courses to ensure that online providers meet OSHA's expectations for program quality and consistency.
Occupational Exposure to Beryllium and Beryllium Compounds in Construction and Shipyard Sectors
OSHA is proposing to revise the standards for occupational exposure to beryllium and beryllium compounds in the construction and shipyards industries. These proposed changes are designed to accomplish three goals: To more appropriately tailor the requirements of the construction and shipyards standards to the particular exposures in these industries in light of partial overlap between the beryllium standards' requirements and other OSHA standards; to aid compliance and enforcement across the beryllium standards by avoiding inconsistency, where appropriate, between the shipyards and construction standards and proposed revisions to the general industry standard; and to clarify certain requirements with respect to materials containing only trace amounts of beryllium. This proposal would lead to total annualized cost savings of $2.5 million at a 3 percent discount rate over 10 years; at a discount rate of 7 percent over 10 years, the annualized cost savings would be $2.5 million. OSHA has preliminarily determined that these proposed changes would maintain safety and health protections for workers, while facilitating compliance with the standards and yielding some cost savings. This proposal does not affect the general industry beryllium standard.
Underwriters Laboratories, Inc.: Grant of Expansion of Recognition
In this notice, OSHA announces the final decision to expand the scope of recognition for Underwriters Laboratories, Inc. as a Nationally Recognized Testing Laboratory (NRTL).
TUV Rheinland of North America, Inc.: Grant of Expansion of Recognition
In this notice, OSHA announces the final decision to expand the scope of recognition for TUV Rheinland of North America, Inc. as a Nationally Recognized Testing Laboratory (NRTL).
Respirable Crystalline Silica Standards for General Industry, Maritime and Construction; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend OMB approval of the information collection requirements specified in the Respirable Crystalline Silica Standards for General Industry, Maritime, and Construction.
MET Laboratories, Inc.: Grant of Expansion of Recognition
In this notice, OSHA announces the final decision to expand the scope of recognition for MET Laboratories, Inc., as a Nationally Recognized Testing Laboratory (NRTL).
Derricks; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements contained in its Standard on Derricks.
Bay Area Compliance Laboratories Corp.: Grant of Expansion of Recognition
In this notice, OSHA announces the final decision to expand the scope of recognition for Bay Area Compliance Laboratories Corp. as a Nationally Recognized Testing Laboratory (NRTL).
Stakeholder Meeting on Using Leading Indicators To Improve Safety and Health Outcomes
OSHA invites interested parties to participate in a stakeholder meeting to share information on their use of leading indicators to improve safety and health outcomes in the workplace. OSHA plans to use the information to create additional tools that may help employers with developing and using leading indicators. Participants are invited to provide responses to the questions included in this notice and share examples of leading indicators that they use to improve safety or health performance in their workplaces. This information can also be submitted to OSHA in writing. The meeting will take place at the Frances Perkins Building (See Address).
Occupational Exposure to Beryllium and Beryllium Compounds in Construction and Shipyard Sectors
OSHA is finalizing the proposed rule on occupational exposure to beryllium and beryllium compounds in construction and shipyards by delaying the compliance deadlines for nearly all provisions of the standards to September 30, 2020. The one exception to the September 30, 2020 compliance deadline is for the permissible exposure limit (PEL) and the short-term exposure limit (STEL), which OSHA has been enforcing since May 11, 2018. This rule confirms that the exposure limits remain in effect. OSHA is not adopting the portion of the proposed rule that would have revised OSHA's existing beryllium standards for construction and shipyards to revoke the ancillary provisions. OSHA finds that other OSHA standards do not duplicate the requirements of the ancillary provisions in the beryllium standards for construction and shipyards in their entirety. Thus revoking all of the ancillary provisions and leaving only the PEL and STEL would be inconsistent with OSHA's statutory mandate to protect workers from the demonstrated significant risks of material impairment of health resulting from exposure to beryllium and beryllium compounds. OSHA will publish a new proposal for the construction and shipyards beryllium standards, to seek comment on different changes OSHA is considering.
Additional Ambient Aerosol CNC Quantitative Fit Testing Protocols: Respiratory Protection Standard
OSHA is approving two additional quantitative fit testing protocols for inclusion in appendix A of the Respiratory Protection Standard. These protocols are: The modified ambient aerosol condensation nuclei counter (CNC) quantitative fit testing protocol for full-facepiece and half-mask elastomeric respirators and the modified ambient aerosol CNC quantitative fit testing protocol for filtering facepiece respirators. The protocols apply to employers in general industry, shipyard employment, and the construction industry. Both protocols are abbreviated variations of the original OSHA-approved ambient aerosol CNC quantitative fit testing protocol (often referred to as the PortaCount[supreg] protocol), but differ from the test by the exercise sets, exercise duration, and sampling sequence. These protocols will serve as alternatives to the four existing quantitative fit testing protocols already listed in appendix A of the Respiratory Protection Standard and will maintain safety and health protections for workers while providing additional flexibility and reducing compliance burdens.
Nationally Recognized Testing Laboratories; Revised Fee Schedule and Adoption of New Application Acceptance and Review Procedures
In this notice, OSHA revises the schedule of fees that the agency charges to Nationally Recognized Testing Laboratories (NRTLs) and NRTL applicants. In addition, OSHA adopts new streamlined procedures for accepting and reviewing applications of organizations seeking to obtain, renew, or expand NRTL recognition.
QAI Laboratories, Ltd.: Grant of Expansion of Recognition
In this notice, OSHA announces the final decision to expand the scope of recognition for QAI Laboratories, Ltd., as a Nationally Recognized Testing Laboratory (NRTL).
MET Laboratories, Inc.: Grant of Expansion of Recognition and Modification to the NRTL Program's List of Appropriate Test Standards
In this notice, OSHA announces the final decision to expand the scope of recognition for MET Laboratories, Inc., as a Nationally Recognized Testing Laboratory (NRTL). Additionally, OSHA announces the addition of one test standard to the NRTL Program's List of Appropriate Test Standards.
Personal Protective Equipment for General Industry; Extension for the Office of Management and Budget's (OMB) Approval of the Information Collection (Paperwork) Requirements
OSHA solicits comments concerning this proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements contained in the Personal Protective Equipment Standard for General Industry.
Salini-Impregilo/Healy Joint Venture; Application for Permanent Variance and Interim Order; Grant of Interim Order; Request for Comments
In this notice, OSHA announces the application of Salini- Impregilo/Healy Joint Venture for a Permanent Variance and Interim Order from provisions of OSHA standards that regulate work in compressed air environments and presents the agency's preliminary finding to grant the Permanent Variance. OSHA also announces the granting of an Interim Order. OSHA invites the public to submit comments on the variance application to assist the agency in determining whether to grant the applicant a Permanent Variance based on the conditions specified in this application.
Lead in General Industry Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend OMB approval of the information collection requirements specified in the Lead in General Industry Standard.
Aviation Industry Whistleblower Stakeholder Meeting
The Occupational Safety and Health Administration (OSHA) is announcing a public meeting to solicit comments and suggestions from stakeholders on issues facing the agency in the administration of the whistleblower protection provisions under the Wendell H. Ford Aviation Investment and Reform Act for the 21st Century (AIR21).
Advisory Committee on Construction Safety and Health (ACCSH): Notice of Meeting
ACCSH will hold a teleconference/WebEx meeting September 9, 2019, to consider a proposed rule on occupational exposure to beryllium and beryllium compounds in the construction industry.
Recording and Reporting Occupational Injuries and Illnesses; Approval of Information Collection Requirements
This document announces Office of Management and Budget (OMB) approval for the information collection requirements in the Recording and Reporting Occupational Injuries and Illnesses regulation as revised by the Tracking of Injuries and Illnesses final rule. OSHA sought OMB approval of these requirements under the Paperwork Reduction Act of 1995 (the PRA), and, as required by that Act, is announcing the approval for these requirements. The OMB approval number is 1218-0176.
Arizona State Plan for Occupational Safety and Health
OSHA is withdrawing its proposed reconsideration of the Arizona State Plan's final approval status.
Walking and Working Surfaces Standard for General Industry; Extension of the Office of Management and Budget's (OMB) Approval of the Information Collection (Paperwork) Requirements
OSHA solicits public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements contained in the Walking and Working Surfaces Standard for General Industry.
Modification to the List of Appropriate NRTL Program Test Standards
In this notice, OSHA announces the final decision to add a new test standard to the Nationally Recognized Testing Laboratories (NRTL) Program's list of appropriate test standards.
TUV SUD America, Inc.: Application for Expansion of Recognition
In this notice, OSHA announces the application of TUV SUD America, Inc., for expansion of the scope of recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the agency's preliminary finding to grant the application.
Cranes and Derricks in Construction: Operator Qualification; Approval of Information Collection Requirements
This rule is a technical amendment announcing Office of Management and Budget (OMB) approval for the information collection requirements in the Cranes and Derricks in Construction: Operator Qualification final rule. OSHA sought OMB approval of these requirements under the Paperwork Reduction Act of 1995 (the PRA), and is announcing the approval for these requirements. OSHA is also amending its regulations to display the new OMB control number, which is 1218-0270.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.