Additional Requirements for Special Dipping and Coating Operations (Dip Tanks); Extension of the Office of Management and Budget's (OMB) Approval of the Information Collection (Paperwork) Requirement, 60454-60455 [2019-24373]
Download as PDF
<![CDATA[
60454
Federal Register / Vol. 84, No. 217 / Friday, November 8, 2019 / Notices
personnel,2 solely for cybersecurity
purposes. All nonconfidential written
submissions will be available for public
inspection at the Office of the Secretary
and on EDIS.
The authority for the Commission’s
determination is contained in section
337 of the Tariff Act of 1930, as
amended (19 U.S.C. 1337), and in Part
210 of the Commission’s Rules of
Practice and Procedure (19 CFR part
210).
By order of the Commission.
Issued: November 4, 2019.
Lisa Barton,
Secretary to the Commission.
Suzanne Morris,
Chief, Premerger and Division Statistics Unit,
Antitrust Division.
[FR Doc. 2019–24437 Filed 11–7–19; 8:45 am]
BILLING CODE 4410–11–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2010–0020]
DEPARTMENT OF JUSTICE
Additional Requirements for Special
Dipping and Coating Operations (Dip
Tanks); Extension of the Office of
Management and Budget’s (OMB)
Approval of the Information Collection
(Paperwork) Requirement
Antitrust Division
AGENCY:
[FR Doc. 2019–24369 Filed 11–7–19; 8:45 am]
BILLING CODE 7020–02–P
Notice Pursuant to the National
Cooperative Research and Production
Act of 1993—Cooperative Research
Group on Numerical Propulsion
System Simulation
khammond on DSKJM1Z7X2PROD with NOTICES
Register pursuant to Section 6(b) of the
Act on March 9, 2016 (81 FR 12528).
Notice is hereby given that, on
September 11, 2019, pursuant to Section
6(a) of the National Cooperative
Research and Production Act of 1993,
15 U.S.C. 4301 et seq. (‘‘the Act’’),
Southwest Research Institute
—Cooperative Research Group on
Numerical Propulsion System
Simulation (‘‘NPSS’’) has filed written
notifications simultaneously with the
Attorney General and the Federal Trade
Commission disclosing changes in its
membership. The notifications were
filed for the purpose of extending the
Act’s provisions limiting the recovery of
antitrust plaintiffs to actual damages
under specified circumstances.
Specifically, Honda R&D Co., Ltd.,
Saitama, JAPAN, has been added as a
party to this venture.
No other changes have been made in
either the membership or planned
activity of the group research project.
Membership in this group research
project remains open, and NPSS intends
to file additional written notifications
disclosing all changes in membership.
On December 11, 2013, NPSS filed its
original notification pursuant to Section
6(a) of the Act. The Department of
Justice published a notice in the Federal
Register pursuant to Section 6(b) of the
Act on February 20, 2014 (79 FR 9767).
The last notification was filed with
the Department on January 27, 2016. A
notice was published in the Federal
2 All contract personnel will sign appropriate
nondisclosure agreements.
VerDate Sep<11>2014
16:45 Nov 07, 2019
Jkt 250001
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
OSHA solicits public
comments concerning the proposal to
extend the Office of Management and
Budget (OMB) approval of the
information collection requirement
specified in the Standard on Dipping
and Coating Operations (Dip Tanks).
DATES: Comments must be submitted
(postmarked, sent, or received) by
January 7, 2020.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, OSHA
Docket No. OSHA–2010–0020,
Occupational Safety and Health
Administration, U.S. Department of
Labor, Room N–3653, 200 Constitution
Avenue NW, Washington, DC 20210.
Deliveries (hand, express mail,
messenger, and courier service) are
accepted during the OSHA Docket
Office’s normal business hours, 10:00
a.m. to 3:00 p.m., ET.
Instructions: All submissions must
include the agency name and the OSHA
docket number (OSHA–2010–0020) for
the Information Collection Request
(ICR). All comments, including any
SUMMARY:
PO 00000
Frm 00082
Fmt 4703
Sfmt 4703
personal information you provide, such
as social security number and date of
birth are placed in the public docket
without change, and may be made
available online at https://
www.regulations.gov. For further
information on submitting comments,
see the ‘‘Public Participation’’ heading
in the section of this notice titled
SUPPLEMENTARY INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the above
address. All documents in the docket
(including this Federal Register notice)
are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the website. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney or
Seleda Perryman at (202) 693–2222 to
obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Seleda Perryman,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor,
telephone: (202) 693–2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of a
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (PRA)
(44 U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, the reporting burden
(time and costs) is minimal, the
collection instruments are clearly
understood, and OSHA’s estimate of the
information collection burden is
accurate. The Occupational Safety and
Health Act of 1970 (OSH Act) (29 U.S.C.
651 et seq.) authorizes information
collection by employers as necessary or
appropriate for enforcement of the Act
or for developing information regarding
the causes and prevention of
occupational injuries, illnesses, and
accidents (see 29 U.S.C. 657). The OSH
Act also requires OSHA to obtain such
information with a minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of effort in
obtaining said information (see 29
U.S.C. 657).
E:\FR\FM\08NON1.SGM
08NON1
Federal Register / Vol. 84, No. 217 / Friday, November 8, 2019 / Notices
The Standard on Dipping and Coating
Operations (29 CFR 1910.126(g)(4))
requires employers to post a
conspicuous sign near each piece of
electrostatic detearing equipment that
notifies employees of the minimum safe
distance they must maintain between
goods undergoing electrostatic detearing
and the electrodes or conductors of the
equipment used in the process. Doing so
reduces the likelihood of igniting the
explosive chemicals used in
electrostatic detearing operations.
khammond on DSKJM1Z7X2PROD with NOTICES
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirement is necessary for
the proper performance of the agency’s
functions to protect workers, including
whether the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirement,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
The agency is requesting to retain the
previous burden hour estimate of one
(1) hour. There are no program changes
or adjustments associated with the
information collection requirement in
the Standard. The agency has
correspondingly adjusted the per
response burden to maintain a time
burden as close as is possible to the
actual time of no hours (1 hour). OSHA
is requesting that OMB extend approval
of the information collection
requirement contained in the Standard
on Additional Requirements for Special
Dipping and Coating Operations (Dip
Tanks) (29 CFR 1910.126(g)(4)). This
provision requires the employer to
determine how far away goods being
electrostatically deteared should be
separated from electrodes or conductors,
is called the ‘‘safe distance.’’ This
minimum distance must be displayed
conspicuously on a sign located near the
equipment.
OSHA has determined that where
electrostatic equipment is being used,
the information has already been
ascertained and that the ‘‘safe distance’’
has been displayed on a sign in a
permanent manner. The agency will
summarize the comments submitted in
response to this notice, and will include
this summary in the request to OMB.
VerDate Sep<11>2014
16:45 Nov 07, 2019
Jkt 250001
60455
Type of Review: Extension of a
currently approved information
collection.
Title: Additional Requirements for
Special Dipping and Coating Operations
(Dip Tanks) (29 CFR 1910.126(g)(4)).
OMB Control Number: 1218–0237.
Affected Public: Business or other forprofits; Federal Government; State,
Local, or Tribal Government.
Number of Respondents: 10.
Frequency of Recordkeeping: On
occasion.
Total Responses: 10.
Average Time per Response: 0.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and
Maintenance). $0.
https://www.regulations.gov website to
submit comments and access the docket
is available at the website’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the website, and for
assistance in using the internet to locate
docket submissions.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
Signed at Washington, DC, on November 1,
2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor
for Occupational Safety and Health.
You may submit comments in
response to this document as follows:
(1) Electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
material must identify the agency name
and the OSHA docket number (Docket
No. OSHA–2010–0020) for the ICR. You
may supplement electronic submissions
by uploading document files
electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify
electronic comments by your name,
date, and the docket number so the
agency can attach them to your
comments.
Due to security procedures, the use of
regular mail may cause a significant
delay in the receipt of comments. For
information about security procedures
concerning the delivery of materials by
hand, express delivery, messenger, or
courier service, please contact the
OSHA Docket Office at (202) 693–2350,
(TTY (877) 889–5627).
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and dates of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this website.
All submissions, including
copyrighted material, are available for
inspection and copying at the OSHA
Docket Office. Information on using the
PO 00000
Frm 00083
Fmt 4703
Sfmt 4703
V. Authority and Signature
Loren Sweatt, Principal Deputy
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
[FR Doc. 2019–24373 Filed 11–7–19; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2011–0862]
Hazardous Wastes Operations and
Emergency Response (HAZWOPER)
Standard; Extension of the Office of
Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning the proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
specified in the Hazardous Waste
Operations and Emergency Response
(HAZWOPER) Standard.
DATES: Comments must be submitted
(postmarked, sent, or received) by
January 7, 2020.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
SUMMARY:
E:\FR\FM\08NON1.SGM
08NON1
]]>Agencies
[Federal Register Volume 84, Number 217 (Friday, November 8, 2019)]
[Notices]
[Pages 60454-60455]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-24373]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2010-0020]
Additional Requirements for Special Dipping and Coating
Operations (Dip Tanks); Extension of the Office of Management and
Budget's (OMB) Approval of the Information Collection (Paperwork)
Requirement
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning the proposal to
extend the Office of Management and Budget (OMB) approval of the
information collection requirement specified in the Standard on Dipping
and Coating Operations (Dip Tanks).
DATES: Comments must be submitted (postmarked, sent, or received) by
January 7, 2020.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit a copy of your comments and
attachments to the OSHA Docket Office, OSHA Docket No. OSHA-2010-0020,
Occupational Safety and Health Administration, U.S. Department of
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210.
Deliveries (hand, express mail, messenger, and courier service) are
accepted during the OSHA Docket Office's normal business hours, 10:00
a.m. to 3:00 p.m., ET.
Instructions: All submissions must include the agency name and the
OSHA docket number (OSHA-2010-0020) for the Information Collection
Request (ICR). All comments, including any personal information you
provide, such as social security number and date of birth are placed in
the public docket without change, and may be made available online at
https://www.regulations.gov. For further information on submitting
comments, see the ``Public Participation'' heading in the section of
this notice titled SUPPLEMENTARY INFORMATION.
Docket: To read or download comments or other material in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the above address. All documents in the docket (including this Federal
Register notice) are listed in the https://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download from the website. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may also contact Theda Kenney or
Seleda Perryman at (202) 693-2222 to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Seleda Perryman,
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor,
telephone: (202) 693-2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of a continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accordance with the Paperwork Reduction Act
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, the reporting burden (time and
costs) is minimal, the collection instruments are clearly understood,
and OSHA's estimate of the information collection burden is accurate.
The Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the Act or for developing information
regarding the causes and prevention of occupational injuries,
illnesses, and accidents (see 29 U.S.C. 657). The OSH Act also requires
OSHA to obtain such information with a minimum burden upon employers,
especially those operating small businesses, and to reduce to the
maximum extent feasible unnecessary duplication of effort in obtaining
said information (see 29 U.S.C. 657).
[[Page 60455]]
The Standard on Dipping and Coating Operations (29 CFR
1910.126(g)(4)) requires employers to post a conspicuous sign near each
piece of electrostatic detearing equipment that notifies employees of
the minimum safe distance they must maintain between goods undergoing
electrostatic detearing and the electrodes or conductors of the
equipment used in the process. Doing so reduces the likelihood of
igniting the explosive chemicals used in electrostatic detearing
operations.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirement is
necessary for the proper performance of the agency's functions to
protect workers, including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirement, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
The agency is requesting to retain the previous burden hour
estimate of one (1) hour. There are no program changes or adjustments
associated with the information collection requirement in the Standard.
The agency has correspondingly adjusted the per response burden to
maintain a time burden as close as is possible to the actual time of no
hours (1 hour). OSHA is requesting that OMB extend approval of the
information collection requirement contained in the Standard on
Additional Requirements for Special Dipping and Coating Operations (Dip
Tanks) (29 CFR 1910.126(g)(4)). This provision requires the employer to
determine how far away goods being electrostatically deteared should be
separated from electrodes or conductors, is called the ``safe
distance.'' This minimum distance must be displayed conspicuously on a
sign located near the equipment.
OSHA has determined that where electrostatic equipment is being
used, the information has already been ascertained and that the ``safe
distance'' has been displayed on a sign in a permanent manner. The
agency will summarize the comments submitted in response to this
notice, and will include this summary in the request to OMB.
Type of Review: Extension of a currently approved information
collection.
Title: Additional Requirements for Special Dipping and Coating
Operations (Dip Tanks) (29 CFR 1910.126(g)(4)).
OMB Control Number: 1218-0237.
Affected Public: Business or other for-profits; Federal Government;
State, Local, or Tribal Government.
Number of Respondents: 10.
Frequency of Recordkeeping: On occasion.
Total Responses: 10.
Average Time per Response: 0.
Estimated Total Burden Hours: 1.
Estimated Cost (Operation and Maintenance). $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other material must identify the agency name
and the OSHA docket number (Docket No. OSHA-2010-0020) for the ICR. You
may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify electronic comments by
your name, date, and the docket number so the agency can attach them to
your comments.
Due to security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as social security numbers and
dates of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted
material) is not publicly available to read or download from this
website.
All submissions, including copyrighted material, are available for
inspection and copying at the OSHA Docket Office. Information on using
the https://www.regulations.gov website to submit comments and access
the docket is available at the website's ``User Tips'' link. Contact
the OSHA Docket Office for information about materials not available
from the website, and for assistance in using the internet to locate
docket submissions.
V. Authority and Signature
Loren Sweatt, Principal Deputy Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012
(77 FR 3912).
Signed at Washington, DC, on November 1, 2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety
and Health.
[FR Doc. 2019-24373 Filed 11-7-19; 8:45 am]
BILLING CODE 4510-26-P
