Bay Area Compliance Laboratories Corp.: Grant of Expansion of Recognition, 52138-52139 [2019-21231]
Download as PDF
<![CDATA[
52138
Federal Register / Vol. 84, No. 190 / Tuesday, October 1, 2019 / Notices
To submit
comments:
Send them to:
By email .......
pubcomment-ees.enrd@
usdoj.gov.
Assistant Attorney General,
U.S. DOJ—ENRD, P.O.
Box 7611, Washington, DC
20044–7611.
By mail .........
During the public comment period,
the Consent Decree may be examined
and downloaded at this Justice
Department website: https://
www.justice.gov/enrd/consent-decrees.
We will provide a paper copy of the
Consent Decree upon written request
and payment of reproduction costs.
Please mail your request and payment
to: Consent Decree Library, U.S. DOJ—
ENRD, P.O. Box 7611, Washington, DC
20044–7611.
Please enclose a check or money order
for $9.50 (25 cents per page
reproduction cost), payable to the
United States Treasury.
Jeffrey Sands,
Assistant Section Chief, Environmental
Enforcement Section, Environment & Natural
Resources Division.
[FR Doc. 2019–21208 Filed 9–30–19; 8:45 am]
BILLING CODE 4410–15–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2016–0022]
Bay Area Compliance Laboratories
Corp.: Grant of Expansion of
Recognition
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Notice.
AGENCY:
SUMMARY: In this notice, OSHA
announces the final decision to expand
the scope of recognition for Bay Area
Compliance Laboratories Corp. as a
Nationally Recognized Testing
Laboratory (NRTL).
DATES: The expansion of the scope of
recognition becomes effective on
October 1, 2019.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank
Meilinger, Director, OSHA Office of
Communications, U.S. Department of
Labor; telephone: (202) 693–1999;
email: meilinger.francis2@dol.gov.
General and technical information:
Contact Mr. Kevin Robinson, Director,
Office of Technical Programs and
Coordination Activities, Directorate of
Technical Support and Emergency
Management, Occupational Safety and
Health Administration, U.S. Department
of Labor; telephone: (202) 693–2110;
email: robinson.kevin@dol.gov. OSHA’s
website includes information about the
NRTL Program (see https://
www.osha.gov/dts/otpca/nrtl/
index.html).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the
expansion of the scope of recognition of
Bay Area Compliance Laboratories Corp.
(BACL) as a NRTL. BACL’s expansion
covers the addition of two recognized
testing standards to the NRTL scope of
recognition.
OSHA recognition of a NRTL signifies
that the organization meets the
requirements specified in 29 CFR
1910.7. Recognition is an
acknowledgment that the organization
can perform independent safety testing
and certification of the specific products
covered within the scope of recognition,
and is not a delegation or grant of
government authority. As a result of
recognition, employers may use
products properly approved by the
NRTL to meet OSHA standards that
require testing and certification.
The agency processes applications by
a NRTL for initial recognition, or for
expansion or renewal of this
recognition, following requirements in
Appendix A to 29 CFR 1910.7. This
appendix requires that the agency
publish two notices in the Federal
Register in processing an application. In
the first notice, OSHA announces the
application and provides the
preliminary finding and, in the second
notice, the agency provides the final
decision on the application. These
notices set forth the NRTL’s scope of
recognition or modifications of that
scope. OSHA maintains an
informational web page for each NRTL
that details the scope of recognition.
These pages are available from the
agency’s website at https://
www.osha.gov/dts/otpca/nrtl/
index.html.
BACL submitted an application, dated
December 4, 2017 (OSHA–2016–0022–
0006), to expand its scope of recognition
to include two additional test standards.
OSHA performed a detailed analysis of
the application packet and reviewed
other pertinent information. OSHA did
not perform any on-site reviews in
relation to this application.
OSHA published the preliminary
notice announcing BACL’s expansion
application in the Federal Register on
May 15, 2019 (84 FR 21834). The agency
requested comments by May 30, 2019,
and the agency received one comment
(OSHA–2016–0022–0007) about the
application. The comment did not
require a response from the agency.
OSHA now is proceeding with this final
notice to grant expansion of BACL’s
scope of recognition.
To obtain or review copies of all
public documents pertaining to BACL’s
application, go to www.regulations.gov
or contact the Docket Office,
Occupational Safety and Health
Administration, U.S. Department of
Labor, 200 Constitution Avenue NW,
Room N–3655, Washington, DC 20210;
telephone: (202) 693–2350. Docket No.
OSHA–2016–0022 contains all materials
in the record concerning BACL’s
recognition.
II. Final Decision and Order
OSHA staff examined BACL’s
expansion application and examined
other pertinent information. Based on a
review of this evidence, OSHA finds
that BACL meets the requirements of 29
CFR 1910.7 for expansion of
recognition, subject to the limitation
and conditions listed below. OSHA,
therefore, is proceeding with this final
notice to grant expansion of BACL’s
scope of recognition. OSHA limits the
expansion of BACL’s scope of
recognition to testing and certification
of products for demonstration of
conformance to the test standards listed
in Table 1.
jbell on DSK3GLQ082PROD with NOTICES
TABLE 1—LIST OF APPROPRIATE TEST STANDARDS FOR INCLUSION IN BACL’S NRTL SCOPE OF RECOGNITION
Test standard
Test standard title
UL 61010–1 ..........................
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use: Part 1—General
Requirements.
Audio/Video, Information and Communication Technology Equipment: Part 1—Safety Requirement.
UL 62368–1 ..........................
VerDate Sep<11>2014
18:10 Sep 30, 2019
Jkt 250001
PO 00000
Frm 00079
Fmt 4703
Sfmt 4703
E:\FR\FM\01OCN1.SGM
01OCN1
Federal Register / Vol. 84, No. 190 / Tuesday, October 1, 2019 / Notices
OSHA’s recognition of any NRTL for
a particular test standard is limited to
equipment or materials for which OSHA
standards require third-party testing and
certification before using them in the
workplace. Consequently, if a test
standard also covers any products for
which OSHA does not require such
testing and certification, a NRTL’s scope
of recognition does not include these
products.
The American National Standards
Institute (ANSI) may approve the test
standards listed above as American
National Standards. However, for
convenience, the use of the designation
of the standards-developing
organization for the standard as opposed
to the ANSI designation may occur.
Under the NRTL Program’s policy (see
OSHA Instruction CPL 1–0.3, Appendix
C, paragraph XIV), any NRTL
recognized for a particular test standard
may use either the proprietary version
of the test standard or the ANSI version
of that standard. Contact ANSI to
determine whether a test standard is
currently ANSI-approved.
A. Conditions
In addition to those conditions
already required by 29 CFR 1910.7,
BACL must abide by the following
conditions of the recognition:
1. BACL must inform OSHA as soon
as possible, in writing, of any change of
ownership, facilities, or key personnel,
and of any major change in its
operations as a NRTL, and provide
details of the change(s);
2. BACL must meet all the terms of
the recognition and comply with all
OSHA policies pertaining to this
recognition; and
3. BACL must continue to meet the
requirements for recognition, including
all previously published conditions on
BACL’s scope of recognition, in all areas
for which it has recognition.
Pursuant to the authority in 29 CFR
1910.7, OSHA hereby expands the scope
of recognition of BACL, subject to the
limitation and conditions specified
above.
jbell on DSK3GLQ082PROD with NOTICES
III. Authority and Signature
Loren Sweatt, Principal Deputy
Assistant Secretary of Labor for
Occupational Safety and Health,
authorized the preparation of this
notice. Accordingly, the agency is
issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor’s Order No.
1–2012 (77 FR 3912, Jan. 25, 2012), and
29 CFR 1910.7.
VerDate Sep<11>2014
18:10 Sep 30, 2019
Jkt 250001
Signed at Washington, DC, on September
25, 2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor
for Occupational Safety and Health.
[FR Doc. 2019–21231 Filed 9–30–19; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2009–0025]
Underwriters Laboratories, Inc.: Grant
of Expansion of Recognition
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Notice.
AGENCY:
SUMMARY: In this notice, OSHA
announces the final decision to expand
the scope of recognition for
Underwriters Laboratories, Inc. as a
Nationally Recognized Testing
Laboratory (NRTL).
DATES: The expansion of the scope of
recognition becomes effective on
October 1, 2019.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank
Meilinger, Director, OSHA Office of
Communications, U.S. Department of
Labor; telephone: (202) 693–1999;
email: meilinger.francis2@dol.gov.
General and technical information:
Contact Mr. Kevin Robinson, Director,
Office of Technical Programs and
Coordination Activities, Directorate of
Technical Support and Emergency
Management, Occupational Safety and
Health Administration, U.S. Department
of Labor; telephone: (202) 693–2110;
email: robinson.kevin@dol.gov. OSHA’s
website includes information about the
NRTL Program (see https://
www.osha.gov/dts/otpca/nrtl/
index.html).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the
expansion of the scope of recognition of
Underwriters Laboratories, Inc. (UL) as
a NRTL. UL’s expansion covers the
addition of three recognized testing
standards to the NRTL scope of
recognition.
OSHA recognition of a NRTL signifies
that the organization meets the
requirements specified in 29 CFR
1910.7. Recognition is an
acknowledgment that the organization
can perform independent safety testing
PO 00000
Frm 00080
Fmt 4703
Sfmt 4703
52139
and certification of the specific products
covered within the scope of recognition,
and is not a delegation or grant of
government authority. As a result of
recognition, employers may use
products properly approved by the
NRTL to meet OSHA standards that
require testing and certification.
The agency processes applications by
a NRTL for initial recognition, or for
expansion or renewal of this
recognition, following requirements in
Appendix A to 29 CFR 1910.7. This
appendix requires that the agency
publish two notices in the Federal
Register in processing an application. In
the first notice, OSHA announces the
application and provides the
preliminary finding and, in the second
notice, the agency provides the final
decision on the application. These
notices set forth the NRTL’s scope of
recognition or modifications of that
scope. OSHA maintains an
informational web page for each NRTL
that details the scope of recognition.
These pages are available from the
agency’s website at https://
www.osha.gov/dts/otpca/nrtl/
index.html.
UL submitted an application, dated
August 24, 2016 (OSHA–2009–0025–
0024), to expand recognition to include
three additional test standards. This
application was revised on July 24,
2018, to note the titles of the standards
requested in the original application
(OSHA–2009–0025–0025). OSHA staff
performed detailed analyses of the
application packets and other pertinent
information. OSHA did not perform any
on-site reviews in relation to this
application.
OSHA published the preliminary
notice announcing UL’s expansion
application in the Federal Register on
April 10, 2019 (84 FR 14402). The
agency requested comments by April 25,
2019, and the agency received one
comment (OSHA–2009–0025–0028)
about the application, but the comment
did not require a response from the
agency. OSHA now is proceeding with
this final notice to grant expansion of
UL’s scope of recognition.
To obtain or review copies of all
public documents pertaining to UL’s
application, go to www.regulations.gov
or contact the Docket Office,
Occupational Safety and Health
Administration, U.S. Department of
Labor, 200 Constitution Avenue NW,
Room N–3655, Washington, DC 2021;
telephone: (202) 693–2350. Docket No.
OSHA–2009–0025 contains all materials
in the record concerning UL’s
recognition.
E:\FR\FM\01OCN1.SGM
01OCN1
]]>Agencies
[Federal Register Volume 84, Number 190 (Tuesday, October 1, 2019)]
[Notices]
[Pages 52138-52139]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-21231]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2016-0022]
Bay Area Compliance Laboratories Corp.: Grant of Expansion of
Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the final decision to expand
the scope of recognition for Bay Area Compliance Laboratories Corp. as
a Nationally Recognized Testing Laboratory (NRTL).
DATES: The expansion of the scope of recognition becomes effective on
October 1, 2019.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor; telephone: (202) 693-1999;
email: [email protected].
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor; telephone:
(202) 693-2110; email: [email protected]. OSHA's website includes
information about the NRTL Program (see https://www.osha.gov/dts/otpca/nrtl/).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of
recognition of Bay Area Compliance Laboratories Corp. (BACL) as a NRTL.
BACL's expansion covers the addition of two recognized testing
standards to the NRTL scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified in 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within the
scope of recognition, and is not a delegation or grant of government
authority. As a result of recognition, employers may use products
properly approved by the NRTL to meet OSHA standards that require
testing and certification.
The agency processes applications by a NRTL for initial
recognition, or for expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the agency publish two notices in the Federal Register in
processing an application. In the first notice, OSHA announces the
application and provides the preliminary finding and, in the second
notice, the agency provides the final decision on the application.
These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational web page
for each NRTL that details the scope of recognition. These pages are
available from the agency's website at https://www.osha.gov/dts/otpca/nrtl/.
BACL submitted an application, dated December 4, 2017 (OSHA-2016-
0022-0006), to expand its scope of recognition to include two
additional test standards. OSHA performed a detailed analysis of the
application packet and reviewed other pertinent information. OSHA did
not perform any on-site reviews in relation to this application.
OSHA published the preliminary notice announcing BACL's expansion
application in the Federal Register on May 15, 2019 (84 FR 21834). The
agency requested comments by May 30, 2019, and the agency received one
comment (OSHA-2016-0022-0007) about the application. The comment did
not require a response from the agency. OSHA now is proceeding with
this final notice to grant expansion of BACL's scope of recognition.
To obtain or review copies of all public documents pertaining to
BACL's application, go to www.regulations.gov or contact the Docket
Office, Occupational Safety and Health Administration, U.S. Department
of Labor, 200 Constitution Avenue NW, Room N-3655, Washington, DC
20210; telephone: (202) 693-2350. Docket No. OSHA-2016-0022 contains
all materials in the record concerning BACL's recognition.
II. Final Decision and Order
OSHA staff examined BACL's expansion application and examined other
pertinent information. Based on a review of this evidence, OSHA finds
that BACL meets the requirements of 29 CFR 1910.7 for expansion of
recognition, subject to the limitation and conditions listed below.
OSHA, therefore, is proceeding with this final notice to grant
expansion of BACL's scope of recognition. OSHA limits the expansion of
BACL's scope of recognition to testing and certification of products
for demonstration of conformance to the test standards listed in Table
1.
Table 1--List of Appropriate Test Standards for Inclusion in BACL's NRTL
Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
UL 61010-1................... Safety Requirements for Electrical
Equipment for Measurement, Control and
Laboratory Use: Part 1--General
Requirements.
UL 62368-1................... Audio/Video, Information and
Communication Technology Equipment: Part
1--Safety Requirement.
------------------------------------------------------------------------
[[Page 52139]]
OSHA's recognition of any NRTL for a particular test standard is
limited to equipment or materials for which OSHA standards require
third-party testing and certification before using them in the
workplace. Consequently, if a test standard also covers any products
for which OSHA does not require such testing and certification, a
NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the
test standards listed above as American National Standards. However,
for convenience, the use of the designation of the standards-developing
organization for the standard as opposed to the ANSI designation may
occur. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3,
Appendix C, paragraph XIV), any NRTL recognized for a particular test
standard may use either the proprietary version of the test standard or
the ANSI version of that standard. Contact ANSI to determine whether a
test standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7,
BACL must abide by the following conditions of the recognition:
1. BACL must inform OSHA as soon as possible, in writing, of any
change of ownership, facilities, or key personnel, and of any major
change in its operations as a NRTL, and provide details of the
change(s);
2. BACL must meet all the terms of the recognition and comply with
all OSHA policies pertaining to this recognition; and
3. BACL must continue to meet the requirements for recognition,
including all previously published conditions on BACL's scope of
recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the
scope of recognition of BACL, subject to the limitation and conditions
specified above.
III. Authority and Signature
Loren Sweatt, Principal Deputy Assistant Secretary of Labor for
Occupational Safety and Health, authorized the preparation of this
notice. Accordingly, the agency is issuing this notice pursuant to 29
U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912,
Jan. 25, 2012), and 29 CFR 1910.7.
Signed at Washington, DC, on September 25, 2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety
and Health.
[FR Doc. 2019-21231 Filed 9-30-19; 8:45 am]
BILLING CODE 4510-26-P
