QAI Laboratories, Ltd.: Grant of Expansion of Recognition, 48948-48949 [2019-20020]
Download as PDF
<![CDATA[
48948
Federal Register / Vol. 84, No. 180 / Tuesday, September 17, 2019 / Notices
TABLE 1—LIST OF APPROPRIATE TEST STANDARD FOR INCLUSION IN MET’S NRTL SCOPE OF RECOGNITION
Test standard
Test standard title
UL 61010–2–020 .............................
Safety Requirements for Electrical Equipment Measurement, Control and Laboratory Use—Part 2–020:
Particular Requirements for Laboratory Centrifuges.
In this notice, OSHA also announces
the addition of a new test standard to
the NRTL Program’s List of Appropriate
Test Standards. Table 2, below, lists the
test standard that is new to the NRTL
Program. OSHA has determined that
this test standard is an appropriate test
standard and will include it in the
NRTL Program’s List of Appropriate
Test Standards.
TABLE 2—TEST STANDARD OSHA IS ADDING TO THE NRTL PROGRAM’S LIST OF APPROPRIATE TEST STANDARDS
Test standard
Test standard title
UL 61010–2–020 .........................
Safety Requirements for Electrical Equipment Measurement, Control and Laboratory Use—Part 2–020: Particular Requirements for Laboratory Centrifuges.
OSHA’s recognition of any NRTL for
a particular test standard is limited to
equipment or materials for which OSHA
standards require third-party testing and
certification before using them in the
workplace. Consequently, if a test
standard also covers any products for
which OSHA does not require such
testing and certification, a NRTL’s scope
of recognition does not include these
products.
The American National Standards
Institute (ANSI) may approve the test
standards listed above as American
National Standards. However, for
convenience, the designation of the
standards-developing organization for
the standard as opposed to the ANSI
designation may be used. Under the
NRTL Program’s policy (see OSHA
Instruction CPL 1–0.3, Appendix C,
paragraph XIV), any NRTL recognized
for a particular test standard may use
either the proprietary version of the test
standard or the ANSI version of that
standard. Contact ANSI to determine
whether a test standard is currently
ANSI-approved.
jbell on DSK3GLQ082PROD with NOTICES
A. Conditions
17:05 Sep 16, 2019
III. Authority and Signature
Loren Sweatt, Principal Deputy
Assistant Secretary of Labor for
Occupational Safety and Health,
authorized the preparation of this
notice. Accordingly, the agency is
issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor’s Order No.
1–2012 (77 FR 3912, Jan. 25, 2012), and
29 CFR 1910.7.
Signed at Washington, DC, on September
11, 2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor
for Occupational Safety and Health.
Jkt 247001
The expansion of the scope of
recognition becomes effective on
September 17, 2019.
FOR FURTHER INFORMATION CONTACT:
Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank
Meilinger, Director, OSHA Office of
Communications, phone: (202) 693–
1999; email: meilinger.francis2@dol.gov.
General and technical information:
Contact Mr. Kevin Robinson, Director,
Office of Technical Programs and
Coordination Activities, Directorate of
Technical Support and Emergency
Management, Occupational Safety and
Health Administration, U.S. Department
of Labor, phone: (202) 693–2110; email:
robinson.kevin@dol.gov. OSHA’s web
page includes information about the
NRTL Program (see https://
www.osha.gov/dts/otpca/nrtl/
index.html).
DATES:
SUPPLEMENTARY INFORMATION:
[FR Doc. 2019–20019 Filed 9–16–19; 8:45 am]
I. Notice of Final Decision
BILLING CODE 4510–26–P
OSHA hereby gives notice of the
expansion of the scope of recognition of
QAI Laboratories, Ltd. (QAI), as a NRTL.
QAI’s expansion covers the addition of
ten test standards to its scope of
recognition.
OSHA recognition of a NRTL signifies
that the organization meets the
requirements specified by 29 CFR
1910.7. Recognition is an
acknowledgment that the organization
can perform independent safety testing
and certification of the specific products
covered within the scope of recognition
and is not a delegation or grant of
government authority. As a result of
recognition, employers may use
products properly approved by the
NRTL to meet OSHA standards that
require testing and certification of the
products.
DEPARTMENT OF LABOR
In addition to those conditions
already required by 29 CFR 1910.7, MET
must abide by the following conditions
of the recognition:
1. MET must inform OSHA as soon as
possible, in writing, of any change of
ownership, facilities, or key personnel,
and of any major change in the
operations as a NRTL, and provide
details of the change(s);
2. MET must meet all the terms of the
recognition and comply with all OSHA
policies pertaining to this recognition;
and
3. MET must continue to meet the
requirements for recognition, including
all previously published conditions on
VerDate Sep<11>2014
MET’s scope of recognition, in all areas
for which it has recognition.
Pursuant to the authority in 29 CFR
1910.7, OSHA hereby expands the scope
of recognition of MET, subject to the
limitation and conditions specified
above. OSHA also adds one new test
standard to the NRTL Program’s List of
Appropriate Test Standards.
Occupational Safety and Health
Administration
[Docket No. OSHA–2013–0017]
QAI Laboratories, Ltd.: Grant of
Expansion of Recognition
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Notice.
AGENCY:
In this notice, OSHA
announces the final decision to expand
the scope of recognition for QAI
Laboratories, Ltd., as a Nationally
Recognized Testing Laboratory (NRTL).
SUMMARY:
PO 00000
Frm 00044
Fmt 4703
Sfmt 4703
E:\FR\FM\17SEN1.SGM
17SEN1
Federal Register / Vol. 84, No. 180 / Tuesday, September 17, 2019 / Notices
The agency processes applications by
a NRTL for initial recognition, or for
expansion or renewal of this
recognition, following requirements in
Appendix A to 29 CFR 1910.7. This
appendix requires that the agency
publish two notices in the Federal
Registerin processing an application. In
the first notice, OSHA announces the
application and provides a preliminary
finding and, in the second notice, the
agency provides the final decision on
the application. These notices set forth
the NRTL’s scope of recognition or
modifications of that scope. OSHA
maintains an informational web page for
each NRTL that details the scope of
recognition. These pages are available
from the agency’s website at https://
www.osha.gov/dts/otpca/nrtl/
index.html.
QAI submitted an application, dated
August 4, 2017 (OSHA–2013–0017–
0009), to expand their scope of
recognition to include ten additional
test standards. OSHA staff performed a
detailed analysis of the application
packet and reviewed other pertinent
information. OSHA did not perform any
on-site reviews in relation to this
application. OSHA published the
preliminary notice announcing QAI’s
expansion application in the Federal
Register on May 15, 2019 (84 FR 21832).
The agency requested comments by May
30, 2019, but it received no comments
in response to this notice. OSHA now is
proceeding with this final notice to
grant expansion of QAI’s scope of
recognition.
To obtain or review copies of all
public documents pertaining to the
QAI’s application, go to
www.regulations.gov or contact the
Docket Office, Occupational Safety and
Health Administration. Docket No.
48949
OSHA–2013–0017 contains all materials
in the record concerning QAI’s
recognition.
II. Final Decision and Order
OSHA staff examined QAI’s
expansion application, the capability to
meet the requirements of the test
standards, and other pertinent
information. Based on a review of this
evidence, OSHA finds that QAI meets
the requirements of 29 CFR 1910.7 for
expansion of its recognition, subject to
the limitation and conditions listed
below. OSHA, therefore, is proceeding
with this final notice to grant the
expansion of QAI’s scope of recognition.
OSHA limits the expansion of QAI’s
scope of recognition to testing and
certification of products for
demonstration of conformance to the
test standards listed below in Table 1.
TABLE 1—LIST OF APPROPRIATE TEST STANDARDS FOR INCLUSION IN QAI’S NRTL SCOPE OF RECOGNITION
Test standard
jbell on DSK3GLQ082PROD with NOTICES
UL
UL
UL
UL
UL
UL
UL
UL
UL
UL
Test standard title
50 ...............................................
50E .............................................
467 .............................................
962A ...........................................
1012 ...........................................
1310 ...........................................
1573 ...........................................
1951 ...........................................
60950–21 ...................................
60950–23 ...................................
Enclosures for Electrical Equipment, Non-Environmental Considerations.
Enclosures for Electrical Equipment, Environmental Considerations.
Grounding and Bonding Equipment.
Standard for Furniture Power Distribution Units.
Standard for Power Units Other Than Class 2.
Standard for Class 2 Power Units.
Standard for Stage and Studio Luminaires and Connector Strips.
Standard for Electric Plumbing Accessories.
Information Technology Equipment—Safety—Part 21: Remote Power Feeding.
Information Technology Equipment—Safety—Part 23: Large Data Storage Equipment.
OSHA’s recognition of any NRTL for
a particular test standard is limited to
equipment or materials for which OSHA
standards require third-party testing and
certification before using them in the
workplace. Consequently, if a test
standard also covers any products for
which OSHA does not require such
testing and certification, a NRTL’s scope
of recognition does not include these
products.
The American National Standards
Institute (ANSI) may approve the test
standards listed above as American
National Standards. However, for
convenience, the designation of the
standards-developing organization for
the standard as opposed to the ANSI
designation may be used. Under the
NRTL Program’s policy (see OSHA
Instruction CPL 1–0.3, Appendix C,
paragraph XIV), any NRTL recognized
for a particular test standard may use
either the proprietary version of the test
standard or the ANSI version of that
standard. Contact ANSI to determine
whether a test standard is currently
ANSI-approved.
VerDate Sep<11>2014
17:05 Sep 16, 2019
Jkt 247001
A. Conditions
In addition to those conditions
already required by 29 CFR 1910.7, QAI
must abide by the following conditions
of the recognition:
1. QAI must inform OSHA as soon as
possible, in writing, of any change of
ownership, facilities, or key personnel,
and of any major change in the
operations as a NRTL, and provide
details of the change(s);
2. QAI must meet all the terms of the
recognition and comply with all OSHA
policies pertaining to this recognition;
and
3. QAI must continue to meet the
requirements for recognition, including
all previously published conditions on
QAI’s scope of recognition, in all areas
for which it has recognition.
Pursuant to the authority in 29 CFR
1910.7, OSHA hereby expands the scope
of recognition of QAI, subject to the
limitation and conditions specified
above.
III. Authority and Signature
Loren Sweatt, Principal Deputy
Assistant Secretary of Labor for
PO 00000
Frm 00045
Fmt 4703
Sfmt 4703
Occupational Safety and Health,
authorized the preparation of this
notice. Accordingly, the agency is
issuing this notice pursuant to 29 U.S.C.
657(g)(2), Secretary of Labor’s Order No.
1–2012 (77 FR 3912, Jan. 25, 2012), and
29 CFR 1910.7.
Signed at Washington, DC, on September
11, 2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor
for Occupational Safety and Health.
[FR Doc. 2019–20020 Filed 9–16–19; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Veterans’ Employment and Training
Service
Advisory Committee on Veterans’
Employment, Training and Employer
Outreach (ACVETEO): Meeting
Veterans’ Employment and
Training Service (VETS), Department of
Labor (DOL).
AGENCY:
ACTION:
E:\FR\FM\17SEN1.SGM
Notice of open meeting.
17SEN1
]]>Agencies
[Federal Register Volume 84, Number 180 (Tuesday, September 17, 2019)]
[Notices]
[Pages 48948-48949]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2019-20020]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2013-0017]
QAI Laboratories, Ltd.: Grant of Expansion of Recognition
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the final decision to expand
the scope of recognition for QAI Laboratories, Ltd., as a Nationally
Recognized Testing Laboratory (NRTL).
DATES: The expansion of the scope of recognition becomes effective on
September 17, 2019.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, phone: (202) 693-1999; email:
[email protected].
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor, phone:
(202) 693-2110; email: [email protected]. OSHA's web page includes
information about the NRTL Program (see https://www.osha.gov/dts/otpca/nrtl/).
SUPPLEMENTARY INFORMATION:
I. Notice of Final Decision
OSHA hereby gives notice of the expansion of the scope of
recognition of QAI Laboratories, Ltd. (QAI), as a NRTL. QAI's expansion
covers the addition of ten test standards to its scope of recognition.
OSHA recognition of a NRTL signifies that the organization meets
the requirements specified by 29 CFR 1910.7. Recognition is an
acknowledgment that the organization can perform independent safety
testing and certification of the specific products covered within the
scope of recognition and is not a delegation or grant of government
authority. As a result of recognition, employers may use products
properly approved by the NRTL to meet OSHA standards that require
testing and certification of the products.
[[Page 48949]]
The agency processes applications by a NRTL for initial
recognition, or for expansion or renewal of this recognition, following
requirements in Appendix A to 29 CFR 1910.7. This appendix requires
that the agency publish two notices in the Federal Registerin
processing an application. In the first notice, OSHA announces the
application and provides a preliminary finding and, in the second
notice, the agency provides the final decision on the application.
These notices set forth the NRTL's scope of recognition or
modifications of that scope. OSHA maintains an informational web page
for each NRTL that details the scope of recognition. These pages are
available from the agency's website at https://www.osha.gov/dts/otpca/nrtl/.
QAI submitted an application, dated August 4, 2017 (OSHA-2013-0017-
0009), to expand their scope of recognition to include ten additional
test standards. OSHA staff performed a detailed analysis of the
application packet and reviewed other pertinent information. OSHA did
not perform any on-site reviews in relation to this application. OSHA
published the preliminary notice announcing QAI's expansion application
in the Federal Register on May 15, 2019 (84 FR 21832). The agency
requested comments by May 30, 2019, but it received no comments in
response to this notice. OSHA now is proceeding with this final notice
to grant expansion of QAI's scope of recognition.
To obtain or review copies of all public documents pertaining to
the QAI's application, go to www.regulations.gov or contact the Docket
Office, Occupational Safety and Health Administration. Docket No. OSHA-
2013-0017 contains all materials in the record concerning QAI's
recognition.
II. Final Decision and Order
OSHA staff examined QAI's expansion application, the capability to
meet the requirements of the test standards, and other pertinent
information. Based on a review of this evidence, OSHA finds that QAI
meets the requirements of 29 CFR 1910.7 for expansion of its
recognition, subject to the limitation and conditions listed below.
OSHA, therefore, is proceeding with this final notice to grant the
expansion of QAI's scope of recognition. OSHA limits the expansion of
QAI's scope of recognition to testing and certification of products for
demonstration of conformance to the test standards listed below in
Table 1.
Table 1--List of Appropriate Test Standards for Inclusion in QAI's NRTL
Scope of Recognition
------------------------------------------------------------------------
Test standard Test standard title
------------------------------------------------------------------------
UL 50.......................................... Enclosures for
Electrical Equipment,
Non-Environmental
Considerations.
UL 50E......................................... Enclosures for
Electrical Equipment,
Environmental
Considerations.
UL 467......................................... Grounding and Bonding
Equipment.
UL 962A........................................ Standard for Furniture
Power Distribution
Units.
UL 1012........................................ Standard for Power
Units Other Than Class
2.
UL 1310........................................ Standard for Class 2
Power Units.
UL 1573........................................ Standard for Stage and
Studio Luminaires and
Connector Strips.
UL 1951........................................ Standard for Electric
Plumbing Accessories.
UL 60950-21.................................... Information Technology
Equipment--Safety--Par
t 21: Remote Power
Feeding.
UL 60950-23.................................... Information Technology
Equipment--Safety--Par
t 23: Large Data
Storage Equipment.
------------------------------------------------------------------------
OSHA's recognition of any NRTL for a particular test standard is
limited to equipment or materials for which OSHA standards require
third-party testing and certification before using them in the
workplace. Consequently, if a test standard also covers any products
for which OSHA does not require such testing and certification, a
NRTL's scope of recognition does not include these products.
The American National Standards Institute (ANSI) may approve the
test standards listed above as American National Standards. However,
for convenience, the designation of the standards-developing
organization for the standard as opposed to the ANSI designation may be
used. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3,
Appendix C, paragraph XIV), any NRTL recognized for a particular test
standard may use either the proprietary version of the test standard or
the ANSI version of that standard. Contact ANSI to determine whether a
test standard is currently ANSI-approved.
A. Conditions
In addition to those conditions already required by 29 CFR 1910.7,
QAI must abide by the following conditions of the recognition:
1. QAI must inform OSHA as soon as possible, in writing, of any
change of ownership, facilities, or key personnel, and of any major
change in the operations as a NRTL, and provide details of the
change(s);
2. QAI must meet all the terms of the recognition and comply with
all OSHA policies pertaining to this recognition; and
3. QAI must continue to meet the requirements for recognition,
including all previously published conditions on QAI's scope of
recognition, in all areas for which it has recognition.
Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the
scope of recognition of QAI, subject to the limitation and conditions
specified above.
III. Authority and Signature
Loren Sweatt, Principal Deputy Assistant Secretary of Labor for
Occupational Safety and Health, authorized the preparation of this
notice. Accordingly, the agency is issuing this notice pursuant to 29
U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912,
Jan. 25, 2012), and 29 CFR 1910.7.
Signed at Washington, DC, on September 11, 2019.
Loren Sweatt,
Principal Deputy Assistant Secretary of Labor for Occupational Safety
and Health.
[FR Doc. 2019-20020 Filed 9-16-19; 8:45 am]
BILLING CODE 4510-26-P
