Occupational Safety and Health Administration – Federal Register Recent Federal Regulation Documents

The Occupational Safety and Health Administration announces that OMB extended its approval for a number of information collection requirements found in a number of OSHA's standards and regulations. OSHA sought approval of these requirements under the Paperwork Reduction Act of 1995 (PRA), and, as required by that Act, is announcing the approval numbers and expiration dates for these requirements and regulations.

In this notice, OSHA announces the final decision to expand the scope of recognition for FM Approvals, LLC (FM), as a NRTL to include twenty six additional test standards. In addition, OSHA announces the addition of four test standards to the NRTL Program's List of Appropriate Test Standards.

OSHA is soliciting public comments concerning the proposal to extend OMB approval of the information collection requirements contained in the Temporary Labor Camps Standard.

This is a notice of an addendum to the interagency Memorandum of Understanding (MOU) between the U.S. Department of Labor (DOL), Occupational Safety and Health Administration (OSHA) and the U.S. Department of Energy (DOE). The MOU establishes specific interagency procedures for the transfer of occupational safety and health coverage for privatized facilities, properties, and operations from DOE to OSHA and state agencies acting under state plans approved by OSHA.

OSHA solicits public comments concerning the proposal to extend OMB approval of the information collection requirements contained in the Cadmium in General Industry Standard.

With this final rule, OSHA is extending the compliance date for certain ancillary requirements of the general industry beryllium standard to December 12, 2018. This standard protects workers from the hazards of beryllium exposure. OSHA has determined that this final rule will maintain essential safety and health protections for workers while OSHA prepares a Notice of Proposed Rulemaking (NPRM) to clarify specific provisions of the beryllium standard in accordance with a settlement agreement entered into with stakeholders. The December 12, 2018, compliance date affects only certain ancillary provisions, i.e., methods of compliance, beryllium work areas, regulated areas, personal protective clothing and equipment, hygiene areas and practices, housekeeping, communication of hazards, and recordkeeping.

OSHA is soliciting public comments concerning the proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified by the 1,2-Dibromo-3- Chloropropane (DBCP) Standard.

In this notice, OSHA announces the applications of TUV Rheinland of North America, Inc., for expansion of its scope of recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the agency's preliminary finding to grant the applications.

OSHA is providing the public an additional 30 days to comment on only the information collection requirements contained in the proposed updates to its standard for cranes and derricks in construction published on May 21, 2018.

In this notice, OSHA announces the application of MET Laboratories, Inc., for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the Agency's preliminary finding to grant the application. Additionally, OSHA proposes to add one new test standard to the NRTL Program's List of Appropriate Test Standards.

The Occupational Safety and Health Administration published its final rule for cranes and derricks in construction on August 9, 2010. The final rule set out new requirements to enhance worker safety around cranes and derricks. On October 7, 2010, the Association of American Railroads (``AAR'') filed a petition for review in the United States Court of Appeals for the District of Columbia challenging certain requirements affecting railroad roadway work. Subsequently OSHA and AAR reached a settlement agreement under which OSHA agreed to undertake rulemaking to propose expanding several exemptions and to issue clarifications affecting work on or along railroad tracks. These exemptions and clarifications, which would not apply to bridge work, would exempt entirely one type of railroad equipment from OSHA's crane standard; would exempt railroad equipment operators from the certification requirements in the standard; and would include several provisions relating to safety devices, work-area controls, out-of-level work, dragging loads sideways, equipment modifications, and manufacturer requirements. OSHA believes this proposal, if promulgated, would maintain safety and health protections for workers while reducing employers' compliance burdens.

OSHA is confirming the effective date of its direct final rule (DFR) adopting a number of clarifying amendments to the beryllium standard for general industry to address the application of the standard to materials containing trace amounts of beryllium. In the May 7, 2018, DFR, OSHA stated that the DFR would become effective on July 6, 2018, unless one or more significant adverse comments were submitted by June 6, 2018. OSHA did not receive significant adverse comments on the DFR, so by this document the agency is confirming that the DFR will become effective on July 6, 2018.

On May 21, 2018, OSHA published a notice of proposed rulemaking (NPRM) titled ``Cranes and Derricks in Construction: Operator Qualification.'' The period for submitting public comments is being extended by 15 days to allow parties affected by the rule additional time to review the proposed rule and collect information and data necessary for comment.

OSHA solicits public comments concerning the proposal to extend OMB approval of the information collection requirements specified in the Asbestos in Construction Standard.

OSHA solicits public comments concerning the proposal to extend OMB approval of the information collection requirements contained in the Standard on Permit-Required Confined Spaces.

This notice is to advise interested persons that on Tuesday, June 12, 2018, OSHA will conduct a public meeting to discuss proposals in preparation for the 35th session of the United Nations Sub-Committee of Experts on the Globally Harmonized System of Classification and Labelling of Chemicals (UNSCEGHS) to be held July 4 through July 6, 2018, in Geneva, Switzerland. OSHA, along with the U.S. Interagency Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Coordinating Group, plans to consider the comments and information gathered at this public meeting when developing the U.S. Government positions for the UNSCEGHS meeting. OSHA also will give an update on the Regulatory Cooperation Council (RCC). Also, on Tuesday, June 12, 2018, the Department of Transportation (DOT), Pipeline and Hazardous Materials Safety Administration (PHMSA) will conduct a public meeting (See Docket No. PHMSA-2018-0024; Notice No. 2018-07) to discuss proposals in preparation for the 53rd session of the United Nations Sub-Committee of Experts on the Transport of Dangerous Goods (UNSCE TDG) to be held June 25 through July 4, 2018, in Geneva, Switzerland. During this meeting, PHMSA is also requesting comments relative to potential new work items that may be considered for inclusion in its international agenda. PHMSA will also provide an update on recent actions to enhance transparency and stakeholder interaction through improvements to the international standards portion of its website.

In this notice, OSHA announces its final decision to expand the scope of recognition for MET Laboratories, Inc., as a Nationally Recognized Testing Laboratory (NRTL). In addition, OSHA announces the addition of one test standard to the NRTL Program's List of Appropriate Test Standards.

In this notice, OSHA announces the final decision to expand the scope of recognition for MET Laboratories, Inc., as a Nationally Recognized Testing Laboratory (NRTL). Additionally, OSHA announces its final decision to add two new test standards to the NRTL Program's List of Appropriate Test Standards.

On January 9, 2017, the Occupational Safety and Health Administration (OSHA) issued a final rule adopting a comprehensive general industry standard for exposure to beryllium and beryllium compounds. In this proposed rule, OSHA is proposing to adopt a number of clarifying amendments to address the application of the standard to materials containing trace amounts of beryllium. OSHA believes this proposal will maintain safety and health protections for workers while reducing the burden to employers of complying with the current rule.

The Occupational Safety and Health Administration (OSHA) is announcing a public meeting to solicit comments and suggestions from stakeholders in the railroad and trucking industries, including employers, employees, and representatives of employers and employees, on issues facing the agency in its administration of the whistleblower protection provisions of the Federal Railroad Safety Act, the Surface Transportation Assistance Act, the National Transit Systems Security Act, and Section 11(c) of the Occupational Safety and Health Act (as that provision relates to employers and employees in the railroad and trucking industries).

In this notice, OSHA announces the applications of Underwriters Laboratories, Inc., for expansion of its scope of recognition as a Nationally Recognized Testing Laboratory and presents the Agency's preliminary finding to grant the applications. Additionally, OSHA proposes to add twenty-two test standards to the NRTL Program's List of Appropriate Test Standards.

OSHA solicits public comments concerning its proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Standard on Blasting and the Use of Explosives.

OSHA solicits public comments concerning its proposal to extend OMB approval of the information collection requirements specified in the Bloodborne Pathogens Standard.

OSHA solicits public comments concerning its proposal to extend OMB approval of the information collection requirements contained in the Shipyard Employment Standards of Subpart GGear and Equipment for Rigging and Materials Handling and Subpart KPortable, Unfired Pressure Vessels, Drums and Containers, Other than Ship's Equipment. The purpose of the collection of information (paperwork) provisions of the Standards is to reduce workers' risk of death or serious injury by ensuring that equipment has been tested and is in safe operating condition.