Federal Aviation Administration September 2018 – Federal Register Recent Federal Regulation Documents

The FAA announces the charter renewal of the Aviation Rulemaking Advisory Committee (ARAC), a Federal Advisory Committee that works with industry and the public to improve the development of the FAA's regulations.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The information collected is used to allow some experienced pilots who would otherwise qualify as flight instructors or check airmen, but who are not medically eligible to hold the requisite medical certificate, to perform flight instructor or check airmen functions.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Airworthiness Directives are regulations issued to require corrective action to resolve an unsafe condition in aircraft, engines, propellers, and appliances. Reports of inspections are often needed when emergency corrective action is taken to determine if the action was adequate to correct the unsafe condition. The respondents are aircraft owners and operators.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on July 23, 2018. Each fractional ownership program manager and each fractional owner must comply with regulations. Information is used to determine if these entities are operating in accordance with the minimum safety standards of these regulations. The FAA will use the information it reviews and collects to evaluate the effectiveness of the program and make improvements as needed, and ensure compliance and adherence to regulations.

We propose to supersede Airworthiness Directive (AD) 2018-11- 07, which applies to all Saab AB, Saab Aeronautics Model SAAB 2000 airplanes. AD 2018-11-07 requires a one-time inspection of an affected lug attaching the aileron bellcrank support bracket to the rear spar of the wing and the adjacent area of the installed support brackets, a thickness measurement of the affected lug, repetitive inspections of the affected aileron bellcrank support brackets, and corrective actions if necessary. AD 2018-11-07 also provided an optional terminating action for the repetitive inspections. Since we issued AD 2018-11-07, we have determined that it is necessary to require the terminating action. This proposed AD would retain the actions of AD 2018-11-07 and require the terminating action for the repetitive inspections. We are proposing this AD to address the unsafe condition on these products.

We are revising an earlier proposal for all ATR-GIE Avions de Transport R[eacute]gional Model ATR42 and Model ATR72 airplanes. This action revises the notice of proposed rulemaking (NPRM) by increasing the number of affected parts that must be inspected. We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over those in the NPRM, we are reopening the comment period to allow the public the chance to comment on these changes.

This action amends the prohibition against certain flight operations in the Pyongyang Flight Information Region (FIR) (ZKKP) by all: U.S. air carriers; U.S. commercial operators; persons exercising the privileges of an airman certificate issued by the FAA, except when such persons are operating U.S.-registered aircraft for a foreign air carrier; and operators of U.S.-registered civil aircraft, except where the operator of such aircraft is a foreign air carrier. The FAA is also providing an approval process and exemption information for this Special Federal Aviation Regulations (SFAR), consistent with the approval process and exemption information for more recently published flight prohibition SFARs. This final rule will remain in effect for 2 years.

We propose to adopt a new airworthiness directive (AD) for all Weatherly Aircraft Company (Weatherly) Models 201, 201A, 201B, 201C, 620, 620A, 620B, 620B-TG, and 620TP airplanes. This proposed AD was prompted by reports of fatigue cracking of the center wing and outer wing spar hinge brackets due to corrosion pitting. This proposed AD would require repetitive inspections of the wing hinge brackets, pins, and wing spar structure with repair or replacement of parts as necessary. We are proposing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This AD was prompted by a determination that more restrictive maintenance requirements and airworthiness limitations are necessary. This AD requires revising the maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 series airplanes. This AD was prompted by a revision of an airworthiness limitation items (ALI) document. This AD requires revising the maintenance or inspection program, as applicable, to incorporate the specified maintenance requirements and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, the Federal Aviation Administration (FAA) invites public comments about our intention to request Office of Management and Budget (OMB) approval to renew an information collection. The collection involves information on a Domestic, Flag, and Supplemental Operations certificate holder's Safety Management System (SMS). The certificate holder collects information to determine and identify hazards in an aviation operation, measure the effectiveness of hazard identification and mitigation and the prevention unforeseen hazards, and the maintenance of training records and communications documentation used to promote safety. This collection by Domestic, Flag, and Supplemental Operations certificate holders is for compliance with FAA SMS requirements. The Federal Register Notice with a 60-Day comment period soliciting comments on the renewal of this previously approved information collection was published on June 20, 2018 (83 FR 28758). No comments were received.

We are superseding Airworthiness Directive (AD) 2018-02-14 for certain Honeywell International Inc. (Honeywell) TPE331 turboprop and TSE331 turboshaft engines. AD 2018-02-14 required inspection of the affected combustion chamber case assembly, replacement of those assemblies found cracked, and removal of affected assemblies on certain TPE331 and TSE331 engines. This AD retains the inspection and replacement requirements in AD 2018-02-04; revises the Applicability to add the TPE331-12 engine model and the related inspection action, correct references to certain engine models; and revises compliance to allow certain weld repair procedures. This AD was prompted by comments to revise the applicability and required actions of AD 2018-02-14 to include the TPE331-12B engine model, correct certain TPE engine model typographical errors, and to allow certain weld repair procedures. We are issuing this AD to address the unsafe condition on these products.

This action corrects a final rule published in the Federal Register of August 1, 2018, that amends Class E airspace at Lyons-Rice County Municipal Airport, Lyons, KS. The word ``County'' was inadvertently omitted from the airport name in the Summary, History, and Rules section of the document, as well as in the header of the legal description.

We propose to adopt a new airworthiness directive (AD) for GA 8 Airvan (Pty) Ltd Models GA8 and GA8-TC320 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as certain wing strut fittings manufactured with incorrect grain orientation, which has an unknown effect on fatigue related concerns. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This proposed AD was prompted by an incident of uncommanded nose wheel steering (NWS) in- service; subsequent investigation revealed that the steering selector valve (SSV) is susceptible to jamming in the open position due to particulate contamination of the hydraulic system. This proposed AD would require modifying the left-hand hydraulic system of the NWS control system and, for certain airplanes, torqueing the fittings on a certain tube assembly. We are proposing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Airbus Defense and Space S.A. Model C-212-CB, C-212-CC, C-212-CD, C- 212-CE, and C-212-DF airplanes. This AD was prompted by reports of failures of the rudder pedal control system support. This AD requires repetitive detailed visual inspections of the rudder pedal control system support box and shaft and applicable corrective actions. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N1, and SA-366G1 helicopters. This AD requires repetitive inspections of the aft fuselage outer skin. This AD was prompted by several reports of aft fuselage outer skin disbonding. The actions of this AD are intended to address an unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to reinstate an information collection. The collection involves obtaining basic information from new aviation insurance applicants about eligible aviation insurance applicants needed to establish a legally binding, non-premium insurance policy with the FAA, as requested by another Federal agency, such as the applicants name and address, and the aircraft to be covered by the policy. The information collected will be used to determine whether applicants are eligible for Chapter 443 insurance and the amount of coverage necessary; populate non-premium insurance policies with the legal name and address; and meet conditions of coverage required by each insurance policy. As a condition of coverage, air carriers will be required to submit any changes to the basic information initially submitted on the application, as necessary. Air carrier's will also be responsible for providing a copy of their current commercial insurance policy on an ongoing basis, and aircraft registration and serial numbers for any new aircraft the air carrier would like to add to the policy. This information will form part of a legally binding agreement (i.e., insurance policy) between the FAA and air carrier. Failure to provide this updated information could result in lack or denial of coverage.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

We are revising an earlier proposal for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This action revises the notice of proposed rulemaking (NPRM) by adding airplanes to the applicability and adding a measurement of the distance between the hooks of the torsion spring of the lanyard assembly. We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over those in the NPRM, we are reopening the comment period to allow the public the chance to comment on these changes.

We propose to adopt a new airworthiness directive (AD) for all Zodiac Seats France 536-Series Cabin Attendant Seats. This proposed AD was prompted by potential risk of premature corrosion on the seat structure and clamps. This proposed AD would require inspection and modification of all Zodiac Seats France 536-Series Cabin Attendant Seats. We are proposing this AD to address the unsafe condition on these products.

We propose to supersede Airworthiness Directive (AD) 2010-14- 05, which applies to certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. AD 2010-14-05 requires inspection for the part numbers of the system and brake accumulators, and repetitive replacement of affected accumulators. Since we issued AD 2010-14-05, we have determined that new or more restrictive airworthiness limitations, as well as additional actions, are necessary to address the unsafe condition. In addition to the requirements of AD 2010-14-05, this proposed AD would require relocating the accumulators and revising the maintenance or inspection program to incorporate new or more restrictive airworthiness limitations. This proposed AD would also add optional terminating action for certain airplanes. We are proposing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by the discovery of inadequate corrosion protection in certain areas of the horizontal stabilizer and the rear fuselage cone structure. This AD requires application of sealant and protective treatment on the affected areas of the horizontal stabilizer and the rear fuselage cone structure and, for certain airplanes, modification of the trimmable horizontal stabilizer (THS) torsion box and re-identification of the elevator. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of uncommanded motion of the flight control actuator. This AD requires replacing certain rudder and elevator servocontrols with serviceable servocontrols. We are issuing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain Leonardo S.p.A. (Leonardo) Model AW169 helicopters. This proposed AD would require replacing the seals, filler wedges, and handles of each emergency exit window. This proposed AD is prompted by a report that a high level of pushing force was required to jettison some windows. The actions of this proposed AD are intended to address an unsafe condition on these products.