Federal Aviation Administration 2007 – Federal Register Recent Federal Regulation Documents

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model DHC-8-400 series airplanes. This AD requires revising the Limitations section of the airplane flight manual to include procedures for pulling the ``HYD PWR XFER'' circuit breaker in the event of the loss of all hydraulic fluid in the No. 1 or No. 2 hydraulic system. This AD results from reports of fluid loss in the No. 2 hydraulic system, causing the power transfer unit to overspeed, increasing the fluid flow within the No. 1 hydraulic system. We are issuing this AD to prevent possible loss of both the No. 1 and No. 2 hydraulic systems, resulting in the potential loss of several functions essential for safe flight and landing of the airplane.

The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model DHC-8-100, DHC-8-200, and DHC-8-300 series airplanes. This AD requires, for certain airplanes, modification of the upper bearing of the main landing gear (MLG) shock strut. This AD also requires, for certain airplanes, revising the de Havilland DHC-8 Maintenance Program Manual to include the MLG shock strut servicing task. This AD results from reports of over-extension of the MLG shock strut piston, which allows the torque links to go over-center and rest on the piston. We are issuing this AD to prevent loss in shock absorption during touchdown and failure of the shock strut housing, which could result in a subsequent loss of directional control.

The FAA is adopting a new airworthiness directive (AD) for GE CF6-80 series turbofan engines with fuel shroud retaining rings, part number (P/N) J204P0084, installed. This AD requires replacing those retaining rings with a more robust design fuel shroud retaining snap ring. This AD results from two events of external engine fuel leakage and a subsequent under-cowl engine fire. We are issuing this AD to prevent an under-cowl engine fire and damage to the airplane during an engine high vibration event.

On April 20, 2007, the FAA published in the Federal Register a direct final rule entitled Change in Extinguishing Agent Container Requirements. The rule aligned the operational and certification requirements regarding airplane extinguishing agent containers or fire bottles; and it removed an obsolete section reference from part 135. This action withdraws the rule because the FAA received several adverse comments.

This action proposes to revise Class E airspace at Hoquiam, WA. Additional controlled airspace is necessary to accommodate aircraft using the Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Bowerman Airport. The FAA is proposing this action to enhance the safety and management of Instrument Flight Rules (IFR) aircraft operations at Bowerman Airport, Hoquiam, WA.

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Cessna Model 500, 550, S550, 560, 560XL, and 750 airplanes. That AD currently requires installing identification sleeves on the wires for the positive and negative terminal studs of the engine and/or auxiliary power unit (APU) fire extinguishing bottles, as applicable, and re-connecting the wires to the correct terminal studs. This new AD retains the requirements of the existing AD; adds airplanes to the applicability; and, for certain airplanes only, requires a review of wiring changes made using the original issue of one service bulletin and corrective actions if necessary. This AD results from a determination that additional airplanes are subject to the unsafe condition described in the existing AD. We are issuing this AD to ensure that the fire extinguishing bottles are activated in the event of an engine or APU fire, and that flammable fluids are not supplied during a fire, which could result in an unextinguished fire in the nacelle or APU.

The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on March 23, 2007, vol. 72, no. 52, page 13855. Title 49 U.S.C. 44703(h) mandates that all U.S. air carriers operating under 14 CFR parts 121 or 135, and all U.S. air operators under 14 CFR part 125, and certain others, request and receive certain training, safety, and testing records before extending a firm offer of employment to an individual who is applying to their company as a pilot.

The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) CF6-50C series turbofan engines. This AD requires reworking certain forward fan stator cases and installing a fan module secondary containment shield. This AD results from reports of uncontained fan blade failures causing damage and separation of airplane hydraulic lines. We are issuing this AD to prevent uncontained fan blade failures, which can result in separation of airplane hydraulic lines, damage to critical airplane systems, and possible loss of airplane control.

This action modifies the Class E airspace area at St. Johns, AZ. The establishment of an Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) to Runway 32 at St. Johns Industrial Air Park, St. Johns, AZ, has made this action necessary. Additional controlled airspace extending upward from 700 feet above the surface is needed to contain aircraft executing the RNAV (GPS) IAP to RWY 32 at St. Johns Industrial Air Park makes this proposal necessary. The intended effect of this action is to provide adequate controlled airspace for aircraft executing the RNAV (GPS) SIAP to RWY 32 at St. Johns Industrial Air Park, St. Johns, AZ.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is adopting a new airworthiness directive (AD) for all McDonnell Douglas Model MD-11 and MD-11F airplanes. This AD requires installing bracket assemblies and jumper wires in the center main wheel well to improve the bonding path between the structure (wall) of the lower auxiliary fuel tank and its internal fuel pumps; measuring the electrical resistance between the fuel pump housings and the fuel tank structure; and doing corrective actions if necessary. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to detect and correct an inadequate bond between the internal fuel pump housings and the structure of the lower auxiliary fuel tank. This condition, if not corrected, could fail to meet fault current requirements and result in a potential ignition source that, in combination with flammable fuel vapors, could cause a fuel tank explosion and consequent loss of the airplane.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This action proposes to modify Class D airspace at Castle Airport, Atwater, CA. This proposal would reduce the ceiling of the Atwater, CA, Class D airspace to below 2,000 feet mean sea level (MSL), change the southern boundary of the airspace and add an extension to the north to provide controlled airspace for the safety of aircraft executing Standard Instrument Approach Procedures (SIAPs) and other Instrument Flight Rules (IFR) operations at Castle Airport.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA proposes to adopt a new airworthiness directive (AD) for all McDonnell Douglas Model MD-11 and MD-11F airplanes and certain Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30 and DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, and MD-10-30F airplanes. This proposed AD would require rerouting system 3 hydraulic piping, installing new pipe assemblies and unions, and installing redesigned support brackets for the system 3 hydraulic piping. This proposed AD results from a report of damage to the hydraulic system that occurred when pieces of a ruptured tire from the left main landing gear penetrated the wing trailing edge access panel during takeoff. We are proposing this AD to prevent damage to the system 3 hydraulic piping, which could result in loss of the hydraulic system.

The Federal Aviation Administration (FAA) announces its findings on the Noise Compatibility Program submitted by the Jacksonville Airport Authority under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). On December 22, 2006, the FAA determined that the noise exposure maps submitted by the Jacksonville Airport Authority under Part 150 were in compliance with applicable requirements. On May 14, 2007, the FAA approved the Craig Municipal Airport noise compatibility program. All of the recommendations of the program were approved.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, -800 and -900 series airplanes. This proposed AD would require a one-time general visual inspection of frames between body station (BS) 360 and BS 907 to determine if certain support brackets of the air conditioning (A/C) outlet extrusions are installed; medium- and high-frequency eddy current inspections for cracking of the frames around the attachment holes of the subject brackets; and repair if necessary. This proposed AD would also require installing new, improved fittings for all support brackets of the A/C outlet extrusions between BS 360 and BS 907. This proposed AD results from numerous reports of multiple cracks in the frames around the attachment holes of certain support brackets of the A/C outlet extrusions. We are proposing this AD to detect and correct frame cracking, which, if not corrected, could lead to a severed frame that, combined with cracking of the skin lap splice above stringer 10, could result in rapid decompression of the airplane.

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Bombardier Model DHC-8-400 series airplanes. That AD currently requires inspecting the electrical connectors of the fire bottles for the forward and aft baggage compartments and for the auxiliary power unit (APU) and engine nacelles to determine if they are connected correctly, and doing related investigative and corrective actions if necessary. This new AD adds a requirement to install/modify lanyards, mounts, and clamps to the forward and aft baggage compartment, APU, and engine nacelle fire extinguishing systems. This new AD also requires revising the aircraft maintenance manual to incorporate installation and removal procedures for certain fire bottles and fire extinguisher cartridges. This new AD also adds two airplanes to the applicability. This AD results from reports of the electrical connectors for the fire bottles in the forward and aft baggage compartments, APU, and engine nacelle being cross-connected. We are issuing this AD to detect and correct cross- connection of the fire bottles and to prevent cross-connection, which could result in failure of the fire bottles to discharge and consequent inability to extinguish a fire in the affected areas.

The FAA is superseding an existing airworthiness directive (AD), which applies to all McDonnell Douglas Model 717-200 airplanes. That AD currently requires revising the Airworthiness Limitations Section (ALS) of the Instructions for Continued Airworthiness to incorporate new removal limits for certain components of the flap system and to reduce the interval of inspections for fatigue cracking of certain principal structural elements (PSEs). This new AD requires revising the ALS of the Instructions for Continued Airworthiness to incorporate reduced initial inspection and repeat inspection intervals for certain PSEs. This AD results from a revised damage tolerance analysis. We are issuing this AD to detect and correct fatigue cracking of certain PSEs, which could adversely affect the structural integrity of the airplane.

This notice contains a summary of a certain petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.

This notice contains a summary of a certain petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: