Federal Aviation Administration July 2009 – Federal Register Recent Federal Regulation Documents

We propose to rescind an airworthiness directive (AD) for the products listed above. The existing AD resulted from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This action proposes to amend Class E airspace at Minden, NE. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Pioneer Village Field Airport, Minden, NE. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at Pioneer Village Field Airport.

This action amends Class E airspace at Iowa Falls, IA. Additional controlled airspace is necessary to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAP) at Iowa Falls Municipal Airport, Iowa Falls, IA. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at Iowa Falls Municipal Airport.

This action proposes to amend Class E airspace for the St. Louis, MO, area. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Spirit of St. Louis Airport, St. Louis, MO. Also, there would be minor adjustments to the geographic coordinates for Lambert-St. Louis International Airport, St. Louis VORTAC, and the Foristell VORTAC. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) aircraft operations at Spirit of St. Louis Airport.

This action extends the comment period for a proposed rule that was published on May 1, 2009. The proposed rule would require all certificate holders conducting operations under part 135 to include in their training programs crew resource management for crewmembers, including pilots and flight attendants. This proposal is needed to ensure that crewmembers in part 135 operations receive training and practice in the use of crew resource management principles, as appropriate for their operation. This proposed rule would respond to National Transportation

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR 21.611(a) and (b), 21.607(c) and 21.613(a)(1). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This action proposes to amend Class D and Class E airspace for Forbes Field Airport, Topeka, KS. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Forbes Field Airport, Topeka, KS. This action also incorporates the Class E as extensions to Class D at Forbes Field Airport into the Class D surface area. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) aircraft operations at Forbes Field Airport.

The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all McDonnell Douglas Model DC-9-14, DC- 9-15, and DC-9-15F airplanes; and McDonnell Douglas Model DC-9-20, DC- 9-30, DC-9-40, and DC-9-50 series airplanes. The existing AD currently requires repetitive inspections for cracks of the main landing gear (MLG) shock strut cylinder, and related investigative and corrective actions if necessary. This proposed AD would add more work on airplanes that have main landing gear shock struts with certain identified part numbers. This proposed AD results from two reports of a collapsed MLG and a report of cracks in two MLG cylinders. We are proposing this AD to detect and correct fatigue cracks in the shock strut cylinder of the MLG, which could result in a collapsed MLG during takeoff or landing, and possible reduced structural integrity of the airplane.

This action proposes to amend Class E airspace for the Peoria, IL area. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Mount Hawley Auxiliary Airport, Peoria, IL. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) aircraft operations at Mount Hawley Auxiliary Airport.

This action proposes to establish Class E airspace at Little River, CA. Controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Little River Airport, Little River, CA. The FAA is proposing this action to enhance the safety and management of aircraft operations at Little River Airport, Little River, CA.

The FAA proposes to supersede an existing airworthiness directive (AD) for Lycoming Engines (formerly Textron Lycoming) models 320, 360, and 540 series, ``Parallel Valve'' reciprocating engines, with certain Engine Components, Inc. (ECi) cylinder assemblies, part number (P/N) AEL65102 series ``Titan,'' installed. That AD currently requires initial and repetitive visual inspections and compression tests to detect cracks at the head-to-barrel interface, replacement of cylinder assemblies found cracked, and replacement of certain cylinder assemblies at new, reduced times-in-service. This proposed AD would require the same actions, but for an expanded population of cylinder assemblies. This proposed AD results from reports of 10 additional cylinder head separations since issuing AD 2008-19-05, on cylinder serial numbers not listed in that AD. We are proposing this AD to prevent loss of engine power due to cracks at the head-to-barrel interface and possible engine failure caused by separation of a cylinder head, which could result in loss of control of the aircraft.

This notice announces the issuance of Advisory Circular (AC) 33.87-2, Comparative Endurance Test Method to Show Durability for Parts Manufacturer Approval of Turbine Engine and Auxiliary Power Unit Parts. This AC describes a comparative endurance test method to be used for certain turbine engine or auxiliary power unit parts when manufactured under Parts Manufacturer Approval (PMA). This method may be used when PMA applicants introduce changes that could affect the durability of their proposed designs. It may also be used when an applicant has insufficient comparative data to show that the durability of their proposed PMA part is at least equal to the type design. The applicant can use this method when requesting PMA under test and computation, per part 21 of Title 14 of the Code of Federal Regulations, and using the comparative test and analysis approach detailed in Federal Aviation Administration Order 8110.42, Part Manufacturer Approval Procedures.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * *

This action amends Class E airspace at Ankeny, IA. Cancellation of NDB approaches at Ankeny Regional Airport has made it necessary to reconfigure Class E airspace. Controlled airspace is necessary to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAP) at Ankeny Regional Airport, Ankeny, IA. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at Ankeny Regional Airport. This action also updates the geographic coordinates of the airport to coincide with the FAA's National Aeronautical Charting Office.

The Federal Aviation Administration (FAA) announces that is has discontinued the preparation of an Environmental Impact Statement (EIS) for proposed development at West Bend Municipal Airport, West Bend, Wisconsin. The FAA is doing so because the current proposed development is not ripe for decision at this time and lacks proper support and justification in the near-term planning period.

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The FAA is correcting airworthiness directive (AD) 2009-03-05. That AD applies to PWC PW206 and PW207 series turboshaft engines. We published that AD in the Federal Register on February 20, 2009 (74 FR 7794). Paragraph (d) in the regulatory text is incorrect. This document corrects that paragraph. In all other respects, the original document remains the same.

The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the Provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Public Law 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR Part 158). This notice is published pursuant to paragraph d of Sec. 158.29.

The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR Part 158). This notice is published pursuant to paragraph d of Sec. 158.29.

The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR Part 158). This notice is published pursuant to paragraph d of Sec. 158.29.

The FAA proposes to adopt a new airworthiness directive (AD) for certain CFM International Model CFM56-3B1 and -3B2 turbofan engines. This proposed AD would require initial and repetitive inspections for damage to the fan blades. This proposed AD results from a report of a failed fan blade with severe out-of-limit wear on the underside of the blade platform where it contacts the damper. We are proposing this AD to prevent failure of multiple fan blades, which could result in an uncontained failure of the engine and damage to the airplane.

The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Boeing Model 747-200F, 747-200C, 747-400, 747-400D, and 747-400F series airplanes. The existing AD currently requires repetitive inspections for cracking of certain fuselage internal structure (i.e., Sections 42 and 46 fuselage frames, upper deck floor beams, electronic bay access door cutout, nose wheel well, and main entry doors and door cutouts), and repair if necessary. This proposed AD would require additional repetitive inspections for cracking of certain fuselage structure (i.e., Section 41 fuselage frames where they connect to upper deck floor beams, and section 41 fuselage frames between stringer (S-8 and S-12), and related investigative/corrective actions if necessary. This proposed AD would also reduce the inspection threshold and repetitive inspection intervals for certain airplanes. This proposed AD results from fatigue tests and analysis by Boeing that identified additional areas of the fuselage where fatigue cracks can occur. We are proposing this AD to prevent the loss of structural integrity of the fuselage, which could result in rapid depressurization of the airplane.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A310 series airplanes. That AD currently requires repetitive inspections of the fuselage skin to detect corrosion or fatigue cracking around and under the chafing plates of the wing root; repetitive inspections for fatigue cracking of frame 39, stringer 35; and corrective actions if necessary. The existing AD also provides for an optional terminating action for certain repetitive inspections, except for certain areas where corrosion was detected and reworked. This new AD reduces the intervals for accomplishing repetitive inspections in a certain area. This AD results from mandatory continuing airworthiness information originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. We are issuing this AD to detect and correct fatigue cracks and corrosion around and under the chafing plates of the wing root, which could result in reduced structural integrity of the airplane.