Federal Aviation Administration February 2009 – Federal Register Recent Federal Regulation Documents

We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 747 airplanes. This proposed AD would require repetitive inspections for cracking of the fuselage frames in section 41, and corrective actions if necessary. This proposed AD results from reports of cracking in fuselage frames made of 2024 aluminum alloy that were installed during previous modification of the frames in section 41 and during production. We are proposing this AD to detect and correct frame cracks, which could result in cracking of the adjacent fuselage skin and consequent rapid decompression of the airplane.

This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA proposes to adopt a new airworthiness directive (AD) for GE CF6-80C2B5F turbofan engines. This proposed AD would require removing certain part number (P/N) high-pressure compressor rotor (HPCR) 11-14 spool/shafts before they exceed a new, reduced life limit. This proposed AD results from an internal GE audit that compared the life limited parts certification documentation to the airworthiness limitations section (ALS) of the instructions for continuing airworthiness (ICA). We are proposing this AD to prevent HPCR 11-14 spool/shaft fatigue cracks caused by exceeding the life limit, which could result in a possible uncontained failure of the HPCR spool/shaft and damage to the airplane.

The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR Part 158). This notice is published pursuant to paragraph d of Sec. 158.29.

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A300, A310, and A300-600 series airplanes. That AD currently requires repetitive detailed visual inspections to detect cracks in the pylon thrust and sideload fitting of the wing, and replacement of any cracked pylon thrust and sideload fitting with a new fitting. This new AD reduces the threshold and repetitive intervals for the detailed inspection for certain airplanes and reduces the applicability of the existing AD. This AD results from issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. We are issuing this AD to detect and correct cracks in the pylon thrust and sideload fitting of the wing, which could result in reduced structural integrity of the airplane.

The FAA is superseding an existing airworthiness directive (AD), which applies to all BAE Systems (Operations) Limited (Jetstream) Model 4101 airplanes. That AD currently requires repetitive tests for free movement of the capsule/bearing of the nose landing gear (NLG), and related investigative and corrective actions. This new AD requires a modified test for free movement of the capsule/bearing of the NLG at reduced repeat intervals, and replacement of the NLG assembly with a modified assembly. This AD results from additional reports of the NLG failing to extend fully on an airplane that had been inspected in accordance with AD 2004-14-07. We are issuing this AD to prevent failure of the NLG to extend fully, which could result in reduced controllability of the airplane during landing.

The FAA is adopting a new airworthiness directive (AD) for certain CASA Model C-212-DF airplanes. This AD requires a one-time conductivity inspection to determine the material used in manufacturing outer to center wing attachment fittings; and one-time inspections to detect cracks on affected fittings, and corrective action if necessary. This AD results from reports of cracks found in outer to center wing attachment fittings. We are issuing this AD to detect and correct cracks on the upper and lower fittings in both outer and center wings, which could result in reduced structural integrity of the airplane.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This notice announces a public meeting of the FAA's Aviation Rulemaking Advisory Committee (ARAC) to discuss transport airplane and engine (TAE) issues.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This action establishes Class D airspace at Branson Airport, Branson, MO. The establishment of an air traffic control tower has made this action necessary for the safety of Instrument Flight Rule (IFR) operations at the airport.

The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ airplanes. The existing AD currently requires repetitive inspections for corrosion of frames 15, 18, 41, and 43 and applicable related investigative and corrective actions. The existing AD also provides an optional action that would extend the repetitive inspection interval. This proposed AD would add a high frequency eddy current inspection for corrosion of the outer frame flanges and door hinge bosses of frames 15, 18, 41, and 43. This proposed AD results from a report indicating that corrosion has been detected in the outer frame flanges and door hinge bosses during scheduled maintenance. We are proposing this AD to prevent reduced structural integrity of the airplane.

We propose to adopt a new Airworthiness Directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The Federal Aviation Administration (FAA) and the National Park Service (NPS), in accordance with the National Parks Air Tour Management Act of 2000, announce the next meeting of the National Parks Overflights Advisory Group (NPOAG) Aviation Rulemaking Committee (ARC). This notification provides the date, format, and agenda for the meeting and provides additional information to the Federal Register notice published on February 3, 2009 (Vol. 74, No. 21, Page 5969) by providing the call in number for the public to access the telcon. Dates and Location: The NPOAG ARC will hold a meeting on February 25th, 2009. The meeting will be conducted as a telephone conference call. The meeting will be held from 9 a.m. to 12 p.m. Pacific Standard Time on February 25th. This NPOAG meeting will be open to the public. Interested persons may listen in on the conference call (see Public Participation at the Meeting)

We are adopting a new airworthiness directive (AD) for certain Learjet Model 55, 55B, and 55C airplanes. This AD requires inspecting the installation of the forward light assembly in the aft lavatory to determine the location of the terminal connector; inspecting for damage of the light assembly terminals, wires, and oxygen lines; inspecting to determine if the cable nipple is installed over the light assembly terminal; and doing corrective actions if necessary. This AD also requires installing a clamp to the forward side of the frame to maintain a positive distance between the light assembly and oxygen line. This AD results from a report of a cabin fire in the left-hand upper cabin fuselage above the aft cabin window at frame 23. We are issuing this AD to detect and correct improper installation of the lavatory light assembly, which could result in contact between the electrical terminals of the light assembly and an adjacent oxygen supply line, and consequent short circuit or fire hazard.

The FAA is adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Models 401, 401A, 401B, 402, 402A, and 402B airplanes. This AD requires an inspection of the auxiliary wing spar near the location where the main landing gear trunnion is mounted for cracks; immediate replacement if cracks of 0.5 inch or more are found; repetitive inspections with replacement at a later time as long as cracks of less than 0.5 inch are found; and a report to the FAA and Cessna if any cracks are found. This AD results from several reports of fatigue cracking on the affected airplanes in the auxiliary wing spar. We are issuing this AD to detect and correct such cracks, which, if not corrected, could result in failure of the wing auxiliary spar web and cause landing gear collapse during normal landing. This could lead to loss of control and passenger injury.

This action amends Class E airspace at Tulsa, OK. Additional controlled airspace is necessary to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAP) at William R. Pogue Municipal Airport, Sand Springs, OK. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at William R. Pogue Municipal Airport.

This action removes Class E airspace at Rockport, TX. This airspace has been incorporated into the Corpus Christi, TX, Class E airspace area under a separate rulemaking action to ensure the safety of aircraft and efficient use of airspace.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 221: Aircraft Secondary Barriers.

The FAA is superseding an existing airworthiness directive (AD) for Turbomeca Turmo IV A and IV C series turboshaft engines. That AD is applicable to engines with oil-tank-to-oil-cooler flexible lubrication pipes, part number (P/N) 0 249 92 813 0 or P/N 0 249 92 916 0, installed. That AD currently requires identifying, inspecting, and replacing affected flexible lubrication pipes manufactured after April 1, 2003. That AD also requires initial and repetitive borescope inspections of affected pipes, visual inspections for oil leakage, and visual inspections of the oil filter. That AD also requires that if both engines on the same helicopter each have an affected pipe, replacing one of the affected pipes before further flight. This AD does not contain that requirement. This AD requires the same inspections as the superseded AD and adds inspection of oil-pump-to-intermediate- bearing flexible lubricating pipe, P/N 0 249 92 808 0. This AD also requires all remaining affected flexible lubrication pipes, P/N 0 249 92 813 0, P/N 0 249 92 916 0, and P/N 0 249 92 808 to be replaced as terminating action to the repetitive inspections for those affected pipes. This AD results from additional shutdowns caused by pipes, P/N 0 249 92 808 0, and the introduction of Turbomeca Modifications TU 231 and TU 233 that replace pipes, P/N 0 249 92 813 0, P/N 0 249 92 916 0, and P/N 0 249 92 808. We are issuing this AD to prevent helicopter engine in-flight shutdown of one or both engines resulting in an emergency auto-rotation landing or accident.

The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce Corporation (RRC) AE 3007A1E and AE 1107C turbofan/ turboshaft engines. This AD requires removal from service of certain 2nd stage, 3rd stage, and 4th stage compressor wheels, compressor cone shaft assemblies, and 1st to 2nd-stage turbine spacers at new, reduced, published life limits. This AD results from RRC applying an updated lifing methodology to the affected parts. We are issuing this AD to prevent low-cycle-fatigue failure of the parts listed in Table 1 of this AD, which could result in an uncontained engine failure and damage to the aircraft.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: