Department of Transportation November 2020 – Federal Register Recent Federal Regulation Documents

The FAA is adopting a new airworthiness directive (AD) for all Bell Textron Inc. (Type Certificate previously held by Bell Helicopter Textron Inc.) Model 412, 412CF, and 412EP helicopters. This AD requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter. This AD was prompted by an accident and multiple reports of a cracked main gearbox (MGB) support case. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) 2020-02-21, which applies to all Dassault Aviation Model FALCON 2000 airplanes. AD 2020-02-21 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive and airworthiness limitations. Since the FAA issued AD 2020-02-21, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

This final rule amends NHTSA's regulation on anthropomorphic test devices (ATD) to add design and performance specifications for a test dummy representing a 3-year-old child, called the ``Q3s'' test dummy. The Q3s is an instrumented dummy that can assess the performance of child restraint systems in protecting small children in side impacts. Adding the Q3s provides NHTSA a new test device that can be used to improve side impact protection for children.

FMCSA announces its decision to renew exemptions for eight individuals from the hearing requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these hard of hearing and deaf individuals to continue to operate CMVs in interstate commerce.

FMCSA announces receipt of applications from five individuals for an exemption from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) to operate a commercial motor vehicle (CMV) in interstate commerce. If granted, the exemptions will enable these individuals to operate CMVs in interstate commerce without meeting the vision requirement in one eye.

FMCSA announces its decision to renew exemptions for 18 individuals from the hearing requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these hard of hearing and deaf individuals to continue to operate CMVs in interstate commerce.

This action proposes special conditions for the Leonardo S.p.A. (Leonardo) Model A119 and AW119 MKII helicopters. These helicopters as modified by AgustaWestland Philadelphia Corporation (AWPC) will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for helicopters. This design feature is the optional closed circuit refueling receiver (CCRR). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes to modify the Class D airspace at McChord Field (Joint Base Lewis-McChord), Tacoma, WA. After a review of the airspace, the FAA found it necessary to amend the existing airspace for the safety and management of Instrument Flight Rules (IFR) operations at this airport. This proposal would also remove a reference to the McChord VORTAC from the legal description, update the airport name and city, and amend the geographical coordinates for the airport to match the FAA's database.

The FAA is superseding Airworthiness Directive (AD) 2019-14- 09, which applied to all Airbus SAS Model A330-200 Freighter series airplanes. AD 2019-14-09 required repetitive detailed inspections, including functional testing, of the oxygen crew and courier distribution system (OCCDS) and replacement of affected part(s) if necessary. This AD retains the requirements of AD 2019-14-09 and requires replacement of all affected parts with improved serviceable parts, which is terminating action for the repetitive inspections, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

This action proposes to remove Class E airspace at Newburyport, MA, as Plum Island Airport no longer has instrument approaches, and controlled airspace is no longer required. This action would enhance the safety and management of controlled airspace within the national airspace system.

The FAA is adopting a new airworthiness directive (AD) for Pilatus Aircraft Ltd. Models PC-12, PC-12/45, PC-12/47, and PC-12/47E airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as improperly manufactured horizontal stabilizer rear attachment bolts. If not corrected, this could lead to fatigue failure of the bolts and loss of airplane control. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) 2019-03-27, which applies to all Dassault Aviation Model Falcon 10 airplanes. AD 2019-03-27 requires repetitive detailed inspections of certain wing anti-ice outboard flexible hoses, and replacement of certain wing anti-ice outboard flexible hoses. Since the FAA issued AD 2019-03-27, an improved wing anti-ice flexible hose has been developed. This proposed AD would continue to require the actions in AD 2019-03- 27, and would add a new life limit for the improved wing anti-ice flexible hose, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS-365N2, AS 365 N3, EC 155B, EC155B1, and SA- 365N1 helicopters. This AD requires inspecting the tail rotor gearbox (TGB) housing recess, and depending on the inspection results, performing more in-depth inspections and removing certain parts from service. This AD also prohibits installing a TGB unless it has passed certain inspections and has a new TGB control rod bearing installed. This AD was prompted by the discovery of a foreign object obstructing the oil duct of a TGB control bearing. The actions of this AD are intended to address an unsafe condition on these products.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This action amends the Class E airspace extending upward from 700 feet above the surface at Ohio County Airport, Hartford, KY. This action is the result of an airspace review caused by the decommissioning of the Central City VHF omnidirectional range (VOR) navigation aid as part of the VOR Minimum Operational Network (MON) Program. The geographic coordinates of the airport are also being updated to coincide with the FAA's aeronautical database.

In accordance with the Moving Ahead for Progress in the 21st Century Act (MAP-21), this document proposes to amend Federal Motor Vehicle Safety Standard (FMVSS) No. 213, ``Child restraint systems,'' by updating the standard seat assembly on which child restraint systems (CRSs) are tested to determine their compliance with the standard's dynamic performance requirements. This NPRM proposes other amendments to modernize FMVSS No. 213, including a lessening of restrictions in some of the standard's owner registration and labeling requirements, to give manufacturers more flexibility in communicating with today's parents for the purposes of increasing owner registrations for recall notification purposes and increasing the correct use of CRSs, respectively. NHTSA is also proposing ways to streamline the Agency's use of test dummies to assess restraint performance, including simplifying the standard's compliance tests to make them more reflective of the real-world use of CRSs today. The purpose of these and other proposals is to modernize the seat assembly and other aspects of FMVSS No. 213, to help ensure the continued effectiveness of CRSs in current and future vehicles.