Airworthiness Directives; Dassault Aviation Airplanes, 69519-69522 [2020-24148]

Download as PDF 69519 Proposed Rules Federal Register Vol. 85, No. 213 Tuesday, November 3, 2020 This section of the FEDERAL REGISTER contains notices to the public of the proposed issuance of rules and regulations. The purpose of these notices is to give interested persons an opportunity to participate in the rule making prior to the adoption of the final rules. DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2020–0980; Product Identifier 2020–NM–094–AD] RIN 2120–AA64 Airworthiness Directives; Dassault Aviation Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: The FAA proposes to supersede Airworthiness Directive (AD) 2020–02–21, which applies to all Dassault Aviation Model FALCON 2000 airplanes. AD 2020–02–21 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive and airworthiness limitations. Since the FAA issued AD 2020–02–21, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by December 18, 2020. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, khammond on DSKJM1Z7X2PROD with PROPOSALS SUMMARY: VerDate Sep<11>2014 16:17 Nov 02, 2020 Jkt 253001 Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For EASA material that will be incorporated by reference (IBR) in this AD, contact the EASA, KonradAdenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. For Dassault Aviation service information identified in this proposed AD, contact Dassault Falcon Jet Corporation, Teterboro Airport, P.O. Box 2000, South Hackensack, NJ 07606; telephone 201– 440–6700; internet https:// www.dassaultfalcon.com. You may view this IBR material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available in the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020– 0980. Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020– 0980; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206–231–3226; email tom.rodriguez@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed PO 00000 Frm 00001 Fmt 4702 Sfmt 4702 under ADDRESSES. Include ‘‘Docket No. FAA–2020–0980; Product Identifier 2020–NM–094–AD’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend the proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to https:// www.regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this proposed AD. Confidential Business Information CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as ‘‘PROPIN.’’ The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to Tom Rodriguez, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206–231–3226; email tom.rodriguez@ faa.gov. Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking. Discussion The FAA issued AD 2020–02–21, Amendment 39–19833 (85 FR 7860, February 12, 2020) (‘‘AD 2020–02–21’’), for all Dassault Aviation Model FALCON 2000 airplanes. AD 2020–02– 21 requires revising the existing E:\FR\FM\03NOP1.SGM 03NOP1 69520 Federal Register / Vol. 85, No. 213 / Tuesday, November 3, 2020 / Proposed Rules maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA issued AD 2020–02–21 to address reduced controllability of the airplane. AD 2020–02–21 specifies that accomplishing the revision required by paragraph (g) or (i) of that AD terminates the requirements of paragraph (g) of AD 2010–26–05, Amendment 39–16544 (75 FR 79952, December 21, 2010), for Model FALCON 2000 airplanes. Actions Since AD 2020–02–21 Was Issued Since the FAA issued AD 2020–02– 21, the FAA has determined that new or more restrictive airworthiness limitations are necessary. The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020–0113, dated May 20, 2020 (‘‘EASA AD 2020–0113’’) (also referred to as the Mandatory Continuing Airworthiness Information, or ‘‘the MCAI’’), to correct an unsafe condition for all Dassault Aviation Model FALCON 2000 airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is proposing this AD to address reduced controllability of the airplane. See the MCAI for additional background information. khammond on DSKJM1Z7X2PROD with PROPOSALS Related Service Information Under 1 CFR Part 51 EASA AD 2020–0113 describes new or more restrictive airworthiness limitations for airplane structures and safe life limits. This proposed AD would also require Chapter 5–40, Airworthiness Limitations, Revision 20, dated November 2018, of the Dassault Aviation Falcon 2000 Maintenance Manual, which the Director of the Federal Register approved for incorporation by reference as of March 18, 2020 (85 FR 7860, February 12, 2020). This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. FAA’s Determination and Requirements of This Proposed AD This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to the FAA’s bilateral agreement with the State of Design Authority, the FAA has been notified of the unsafe condition described in the MCAI and service VerDate Sep<11>2014 16:17 Nov 02, 2020 Jkt 253001 information referenced above. The FAA is proposing this AD because the FAA has evaluated all pertinent information and determined an unsafe condition exists and is likely to exist or develop on other products of the same type design. Proposed AD Requirements This proposed AD would retain the requirements of AD 2020–02–21. This proposed AD would also require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations which are specified in EASA AD 2020–0113 described previously, as incorporated by reference. Any differences with EASA AD 2020–0113 are identified as exceptions in the regulatory text of this AD. This proposed AD would require revisions to certain operator maintenance documents to include new actions (e.g., inspections). Compliance with these actions is required by 14 CFR 91.403(c). For airplanes that have been previously modified, altered, or repaired in the areas addressed by this proposed AD, the operator may not be able to accomplish the actions described in the revisions. In this situation, to comply with 14 CFR 91.403(c), the operator must request approval for an alternative method of compliance according to paragraph (m)(1) of this proposed AD. Explanation of Required Compliance Information In the FAA’s ongoing efforts to improve the efficiency of the AD process, the FAA initially worked with Airbus and EASA to develop a process to use certain EASA ADs as the primary source of information for compliance with requirements for corresponding FAA ADs. The FAA has since coordinated with other manufacturers and civil aviation authorities (CAAs) to use this process. As a result, EASA AD 2020–0113 will be incorporated by reference in the FAA final rule. This proposed AD would, therefore, require compliance with EASA AD 2020–0113 in its entirety, through that incorporation, except for any differences identified as exceptions in the regulatory text of this proposed AD. Using common terms that are the same as the heading of a particular section in the EASA AD does not mean that operators need comply only with that section. For example, where the AD requirement refers to ‘‘all required actions and compliance times,’’ compliance with this AD requirement is not limited to the section titled PO 00000 Frm 00002 Fmt 4702 Sfmt 4702 ‘‘Required Action(s) and Compliance Time(s)’’ in the EASA AD. Service information specified in EASA AD 2020–0113 that is required for compliance with EASA AD 2020–0113 will be available on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2020–0980 after the FAA final rule is published. Airworthiness Limitation ADs Using the New Process The FAA’s process of incorporating by reference MCAI ADs as the primary source of information for compliance with corresponding FAA ADs has been limited to certain MCAI ADs (primarily those with service bulletins as the primary source of information for accomplishing the actions required by the FAA AD). However, the FAA is now expanding the process to include MCAI ADs that require a change to airworthiness limitation documents, such as airworthiness limitation sections. For these ADs that incorporate by reference an MCAI AD that changes airworthiness limitations, the FAA requirements are unchanged. Operators must revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in the new airworthiness limitation document. The airworthiness limitations must be followed according to 14 CFR 91.403(c) and 91.409(e). The previous format of the airworthiness limitation ADs included a paragraph that specified that no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in the AMOCs paragraph under ‘‘Other FAA Provisions.’’ This new format includes a ‘‘New Provisions for Alternative Actions and Intervals’’ paragraph that does not specifically refer to AMOCs, but operators may still request an AMOC to use an alternative action or interval. Costs of Compliance The FAA estimates that this proposed AD affects 168 airplanes of U.S. registry. The FAA estimates the following costs to comply with this proposed AD: The FAA estimates the total cost per operator for the retained actions from AD 2020–02–21 to be $7,650 (90 workhours × $85 per work-hour). The FAA has determined that revising the existing maintenance or inspection program takes an average of 90 workhours per operator, although the agency recognizes that this number may vary E:\FR\FM\03NOP1.SGM 03NOP1 Federal Register / Vol. 85, No. 213 / Tuesday, November 3, 2020 / Proposed Rules from operator to operator. In the past, the agency has estimated that this action takes 1 work-hour per airplane. Since operators incorporate maintenance or inspection program changes for their affected fleet(s), the FAA has determined that a per-operator estimate is more accurate than a per-airplane estimate. The FAA estimates the total cost per operator for the new proposed actions to be $7,650 (90 work-hours × $85 per work-hour). Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. khammond on DSKJM1Z7X2PROD with PROPOSALS Regulatory Findings The FAA determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Will not affect intrastate aviation in Alaska, and (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. VerDate Sep<11>2014 16:17 Nov 02, 2020 Jkt 253001 The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by: a. Removing Airworthiness Directive (AD) 2020–02–21, Amendment 39– 19833 (85 FR 7860, February 12, 2020), and ■ b. Adding the following new AD: ■ ■ Dassault Aviation: Docket No. FAA–2020– 0980; Product Identifier 2020–NM–094– AD. (a) Comments Due Date The FAA must receive comments by December 18, 2020. (b) Affected ADs (1) This AD replaces AD 2020–02–21, Amendment 39–19833 (85 FR 7860, February 12, 2020) (‘‘AD 2020–02–21’’). (2) This AD affects AD 2010–26–05, Amendment 39–16544 (75 FR 79952, December 21, 2010) (‘‘AD 2010–26–05’’). (c) Applicability This AD applies to all Dassault Aviation Model FALCON 2000 airplanes, certificated in any category. (d) Subject Air Transport Association (ATA) of America Code 05, Time Limits/Maintenance Checks. (e) Reason This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address reduced controllability of the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Retained New Maintenance or Inspection Program Revision With No Changes This paragraph restates the requirements of paragraph (i) of AD 2020–02–21, with no changes. Within 90 days after March 18, 2020 (the effective date of AD 2020–02–21), revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in Chapter 5–40, Airworthiness Limitations, Revision 20, dated November 2018, of the Dassault Aviation Falcon 2000 Maintenance Manual. The initial compliance time for doing the tasks is at the time specified in Chapter 5– 40, Airworthiness Limitations, Revision 20, dated November 2018, of the Dassault PO 00000 Frm 00003 Fmt 4702 Sfmt 4702 69521 Aviation Falcon 2000 Maintenance Manual, or within 90 days after March 18, 2020, whichever occurs later, except as required by paragraphs (g)(1) through (3) of this AD. The term ‘‘LDG’’ in the ‘‘First Inspection’’ column of any table in the service information specified in this paragraph means total airplane landings. The term ‘‘FH’’ in the ‘‘First Inspection’’ column of any table in the service information specified in this paragraph means total flight hours. The term ‘‘FC’’ in the ‘‘First Inspection’’ column of any table in the service information specified in this paragraph means total flight cycles. The term ‘‘M’’ in the ‘‘First Inspection’’ column of any table in the service information specified in this paragraph means months since date of issuance of the original airworthiness certificate or original export certificate of airworthiness. (1) For Task 30–11–09–350–801 identified in the service information specified in the introductory text of paragraph (g) of this AD, the initial compliance time is the later of the times specified in paragraphs (g)(1)(i) and (ii) of this AD. (i) At the earlier of the times specified in paragraphs (g)(1)(i)(A) and (B) of this AD. (A) Prior to the accumulation of 2,400 total flight hours or 2,000 total flight cycles, whichever occurs first. (B) Within 2,400 flight hours or 2,000 flight cycles after April 7, 2014 (the effective date of AD 2014–03–12, Amendment 39–17749 (79 FR 11693, March 3, 2014)), whichever occurs first. (ii) Within 30 days after April 7, 2014 (the effective date of AD 2014–03–12). (2) For Task 52–20–00–610–801–01 identified in the service information specified in the introductory text of paragraph (g) of this AD, the initial compliance time is within 24 months after April 7, 2014 (the effective date of AD 2014– 03–12). (3) The limited service life of part number F2MA721512100 is 3,750 total flight cycles on the part or 6 years since the manufacturing date of the part, whichever occurs first. (h) Retained No Alternative Actions or Intervals With a New Exception This paragraph restates the requirements of paragraph (j) of AD 2020–02–21, with a new exception. Except as required by paragraph (i) of this AD, after the existing maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an AMOC in accordance with the procedures specified in paragraph (m)(1) of this AD. (i) New Maintenance or Inspection Program Revision Except as specified in paragraph (j) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2020–0113, dated May 20, 2020 (‘‘EASA AD 2020–0113’’). Accomplishing the maintenance or inspection program revision required by this paragraph terminates the requirements of paragraph (g) of this AD. E:\FR\FM\03NOP1.SGM 03NOP1 69522 Federal Register / Vol. 85, No. 213 / Tuesday, November 3, 2020 / Proposed Rules (j) Exceptions to EASA AD 2020–0113 (1) The requirements specified in paragraphs (1) and (2) of EASA AD 2020– 0113 do not apply to this AD. (2) Paragraph (3) of EASA AD 2020–0113 specifies revising ‘‘the approved AMP’’ within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, to incorporate the ‘‘limitations, tasks and associated thresholds and intervals’’ specified in paragraph (3) of EASA AD 2020–0113 within 90 days after the effective date of this AD. (3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2020–0113 is at the applicable ‘‘associated thresholds’’ specified in paragraph (3) of EASA AD 2020–0113, or within 90 days after the effective date of this AD, whichever occurs later. (4) The provisions specified in paragraphs (4) and (5) of EASA AD 2020–0113 do not apply to this AD. (5) The ‘‘Remarks’’ section of EASA AD 2020–0113 does not apply to this AD. (k) New Provisions for Alternative Actions and Intervals After the maintenance or inspection program has been revised as required by paragraph (i) of this AD, no alternative actions (e.g., inspections) and intervals are allowed unless they are approved as specified in the provisions of the ‘‘Ref. Publications’’ section of EASA AD 2020– 0113. khammond on DSKJM1Z7X2PROD with PROPOSALS (l) Terminating Action for Certain Actions in AD 2010–26–05 Accomplishing the actions required by paragraph (g) or (i) of this AD terminates the requirements of paragraph (g) of AD 2010– 26–05 for Model FALCON 2000 airplanes only. (m) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person identified in paragraph (n)(4) of this AD. Information may be emailed to: 9-AVS-AIR730-AMOC@faa.gov. (i) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. (ii) AMOCs approved previously for AD 2020–02–21 are approved as AMOCs for the corresponding provisions of EASA AD 2020– 0113 that are required by paragraph (i) of this AD. (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions VerDate Sep<11>2014 16:17 Nov 02, 2020 Jkt 253001 from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or Dassault Aviation’s EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature. (n) Related Information (1) For EASA AD 2020–0113, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https:// ad.easa.europa.eu. (2) For Dassault service information identified in this AD, contact Dassault Falcon Jet Corporation, Teterboro Airport, P.O. Box 2000, South Hackensack, NJ 07606; phone: 201–440–6700; internet: https:// www.dassaultfalcon.com. (3) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. This material may be found in the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020–0980. (4) For more information about this AD, contact Tom Rodriguez, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206–231–3226; email tom.rodriguez@ faa.gov. Issued on October 27, 2020. Lance T. Gant, Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2020–24148 Filed 11–2–20; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2020–0976; Product Identifier 2020–NM–095–AD] RIN 2120–AA64 Airworthiness Directives; Dassault Aviation Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: The FAA proposes to supersede Airworthiness Directive (AD) 2020–04–22, which applies to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2020–04–22 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more SUMMARY: PO 00000 Frm 00004 Fmt 4702 Sfmt 4702 restrictive airworthiness limitations. Since the FAA issued AD 2020–04–22, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by December 18, 2020. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M–30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For EASA material that will be incorporated by reference (IBR) in this AD, contact the EASA, KonradAdenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. For Dassault Aviation service information identified in this proposed AD, contact Dassault Falcon Jet Corporation, Teterboro Airport, P.O. Box 2000, South Hackensack, NJ 07606; telephone 201– 440–6700; internet https:// www.dassaultfalcon.com. You may view this IBR material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available in the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020– 0976. Examining the AD Docket You may examine the AD docket on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2020– 0976; or in person at Docket Operations E:\FR\FM\03NOP1.SGM 03NOP1

Agencies

[Federal Register Volume 85, Number 213 (Tuesday, November 3, 2020)]
[Proposed Rules]
[Pages 69519-69522]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2020-24148]


========================================================================
Proposed Rules
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains notices to the public of 
the proposed issuance of rules and regulations. The purpose of these 
notices is to give interested persons an opportunity to participate in 
the rule making prior to the adoption of the final rules.

========================================================================


Federal Register / Vol. 85, No. 213 / Tuesday, November 3, 2020 / 
Proposed Rules

[[Page 69519]]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2020-0980; Product Identifier 2020-NM-094-AD]
RIN 2120-AA64


Airworthiness Directives; Dassault Aviation Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD) 
2020-02-21, which applies to all Dassault Aviation Model FALCON 2000 
airplanes. AD 2020-02-21 requires revising the existing maintenance or 
inspection program, as applicable, to incorporate new or more 
restrictive and airworthiness limitations. Since the FAA issued AD 
2020-02-21, the FAA has determined that new or more restrictive 
airworthiness limitations are necessary. This proposed AD would require 
revising the existing maintenance or inspection program, as applicable, 
to incorporate new or more restrictive airworthiness limitations, as 
specified in a European Union Aviation Safety Agency (EASA) AD, which 
will be incorporated by reference. The FAA is proposing this AD to 
address the unsafe condition on these products.

DATES: The FAA must receive comments on this proposed AD by December 
18, 2020.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    For EASA material that will be incorporated by reference (IBR) in 
this AD, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, 
Germany; telephone +49 221 8999 000; email [email protected]; internet 
www.easa.europa.eu. You may find this IBR material on the EASA website 
at https://ad.easa.europa.eu. For Dassault Aviation service information 
identified in this proposed AD, contact Dassault Falcon Jet 
Corporation, Teterboro Airport, P.O. Box 2000, South Hackensack, NJ 
07606; telephone 201-440-6700; internet https://www.dassaultfalcon.com. 
You may view this IBR material at the FAA, Airworthiness Products 
Section, Operational Safety Branch, 2200 South 216th St., Des Moines, 
WA. For information on the availability of this material at the FAA, 
call 206-231-3195. It is also available in the AD docket on the 
internet at https://www.regulations.gov by searching for and locating 
Docket No. FAA-2020-0980.

Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-
0980; or in person at Docket Operations between 9 a.m. and 5 p.m., 
Monday through Friday, except Federal holidays. The AD docket contains 
this NPRM, any comments received, and other information. The street 
address for Docket Operations is listed above. Comments will be 
available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aerospace Engineer, 
Large Aircraft Section, International Validation Branch, FAA, 2200 
South 216th St., Des Moines, WA 98198; telephone and fax 206-231-3226; 
email [email protected].

SUPPLEMENTARY INFORMATION:

Comments Invited

    The FAA invites you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under ADDRESSES. Include ``Docket No. FAA-2020-0980; Product Identifier 
2020-NM-094-AD'' at the beginning of your comments. The most helpful 
comments reference a specific portion of the proposal, explain the 
reason for any recommended change, and include supporting data. The FAA 
will consider all comments received by the closing date and may amend 
the proposal because of those comments.
    Except for Confidential Business Information (CBI) as described in 
the following paragraph, and other information as described in 14 CFR 
11.35, the FAA will post all comments received, without change, to 
https://www.regulations.gov, including any personal information you 
provide. The agency will also post a report summarizing each 
substantive verbal contact received about this proposed AD.

Confidential Business Information

    CBI is commercial or financial information that is both customarily 
and actually treated as private by its owner. Under the Freedom of 
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public 
disclosure. If your comments responsive to this NPRM contain commercial 
or financial information that is customarily treated as private, that 
you actually treat as private, and that is relevant or responsive to 
this NPRM, it is important that you clearly designate the submitted 
comments as CBI. Please mark each page of your submission containing 
CBI as ``PROPIN.'' The FAA will treat such marked submissions as 
confidential under the FOIA, and they will not be placed in the public 
docket of this NPRM. Submissions containing CBI should be sent to Tom 
Rodriguez, Aerospace Engineer, Large Aircraft Section, International 
Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; 
telephone and fax 206-231-3226; email [email protected]. Any 
commentary that the FAA receives which is not specifically designated 
as CBI will be placed in the public docket for this rulemaking.

Discussion

    The FAA issued AD 2020-02-21, Amendment 39-19833 (85 FR 7860, 
February 12, 2020) (``AD 2020-02-21''), for all Dassault Aviation Model 
FALCON 2000 airplanes. AD 2020-02-21 requires revising the existing

[[Page 69520]]

maintenance or inspection program, as applicable, to incorporate new or 
more restrictive airworthiness limitations. The FAA issued AD 2020-02-
21 to address reduced controllability of the airplane. AD 2020-02-21 
specifies that accomplishing the revision required by paragraph (g) or 
(i) of that AD terminates the requirements of paragraph (g) of AD 2010-
26-05, Amendment 39-16544 (75 FR 79952, December 21, 2010), for Model 
FALCON 2000 airplanes.

Actions Since AD 2020-02-21 Was Issued

    Since the FAA issued AD 2020-02-21, the FAA has determined that new 
or more restrictive airworthiness limitations are necessary.
    The EASA, which is the Technical Agent for the Member States of the 
European Union, has issued EASA AD 2020-0113, dated May 20, 2020 
(``EASA AD 2020-0113'') (also referred to as the Mandatory Continuing 
Airworthiness Information, or ``the MCAI''), to correct an unsafe 
condition for all Dassault Aviation Model FALCON 2000 airplanes.
    This proposed AD was prompted by a determination that new or more 
restrictive airworthiness limitations are necessary. The FAA is 
proposing this AD to address reduced controllability of the airplane. 
See the MCAI for additional background information.

Related Service Information Under 1 CFR Part 51

    EASA AD 2020-0113 describes new or more restrictive airworthiness 
limitations for airplane structures and safe life limits.
    This proposed AD would also require Chapter 5-40, Airworthiness 
Limitations, Revision 20, dated November 2018, of the Dassault Aviation 
Falcon 2000 Maintenance Manual, which the Director of the Federal 
Register approved for incorporation by reference as of March 18, 2020 
(85 FR 7860, February 12, 2020).
    This material is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in the ADDRESSES section.

FAA's Determination and Requirements of This Proposed AD

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to the FAA's bilateral agreement with the State of Design Authority, 
the FAA has been notified of the unsafe condition described in the MCAI 
and service information referenced above. The FAA is proposing this AD 
because the FAA has evaluated all pertinent information and determined 
an unsafe condition exists and is likely to exist or develop on other 
products of the same type design.

Proposed AD Requirements

    This proposed AD would retain the requirements of AD 2020-02-21. 
This proposed AD would also require revising the existing maintenance 
or inspection program, as applicable, to incorporate new or more 
restrictive airworthiness limitations which are specified in EASA AD 
2020-0113 described previously, as incorporated by reference. Any 
differences with EASA AD 2020-0113 are identified as exceptions in the 
regulatory text of this AD.
    This proposed AD would require revisions to certain operator 
maintenance documents to include new actions (e.g., inspections). 
Compliance with these actions is required by 14 CFR 91.403(c). For 
airplanes that have been previously modified, altered, or repaired in 
the areas addressed by this proposed AD, the operator may not be able 
to accomplish the actions described in the revisions. In this 
situation, to comply with 14 CFR 91.403(c), the operator must request 
approval for an alternative method of compliance according to paragraph 
(m)(1) of this proposed AD.

Explanation of Required Compliance Information

    In the FAA's ongoing efforts to improve the efficiency of the AD 
process, the FAA initially worked with Airbus and EASA to develop a 
process to use certain EASA ADs as the primary source of information 
for compliance with requirements for corresponding FAA ADs. The FAA has 
since coordinated with other manufacturers and civil aviation 
authorities (CAAs) to use this process. As a result, EASA AD 2020-0113 
will be incorporated by reference in the FAA final rule. This proposed 
AD would, therefore, require compliance with EASA AD 2020-0113 in its 
entirety, through that incorporation, except for any differences 
identified as exceptions in the regulatory text of this proposed AD. 
Using common terms that are the same as the heading of a particular 
section in the EASA AD does not mean that operators need comply only 
with that section. For example, where the AD requirement refers to 
``all required actions and compliance times,'' compliance with this AD 
requirement is not limited to the section titled ``Required Action(s) 
and Compliance Time(s)'' in the EASA AD.
    Service information specified in EASA AD 2020-0113 that is required 
for compliance with EASA AD 2020-0113 will be available on the internet 
at https://www.regulations.gov by searching for and locating Docket No. 
FAA-2020-0980 after the FAA final rule is published.

Airworthiness Limitation ADs Using the New Process

    The FAA's process of incorporating by reference MCAI ADs as the 
primary source of information for compliance with corresponding FAA ADs 
has been limited to certain MCAI ADs (primarily those with service 
bulletins as the primary source of information for accomplishing the 
actions required by the FAA AD). However, the FAA is now expanding the 
process to include MCAI ADs that require a change to airworthiness 
limitation documents, such as airworthiness limitation sections.
    For these ADs that incorporate by reference an MCAI AD that changes 
airworthiness limitations, the FAA requirements are unchanged. 
Operators must revise the existing maintenance or inspection program, 
as applicable, to incorporate the information specified in the new 
airworthiness limitation document. The airworthiness limitations must 
be followed according to 14 CFR 91.403(c) and 91.409(e).
    The previous format of the airworthiness limitation ADs included a 
paragraph that specified that no alternative actions (e.g., 
inspections) or intervals may be used unless the actions or intervals 
are approved as an alternative method of compliance (AMOC) in 
accordance with the procedures specified in the AMOCs paragraph under 
``Other FAA Provisions.'' This new format includes a ``New Provisions 
for Alternative Actions and Intervals'' paragraph that does not 
specifically refer to AMOCs, but operators may still request an AMOC to 
use an alternative action or interval.

Costs of Compliance

    The FAA estimates that this proposed AD affects 168 airplanes of 
U.S. registry. The FAA estimates the following costs to comply with 
this proposed AD:
    The FAA estimates the total cost per operator for the retained 
actions from AD 2020-02-21 to be $7,650 (90 work-hours x $85 per work-
hour).
    The FAA has determined that revising the existing maintenance or 
inspection program takes an average of 90 work-hours per operator, 
although the agency recognizes that this number may vary

[[Page 69521]]

from operator to operator. In the past, the agency has estimated that 
this action takes 1 work-hour per airplane. Since operators incorporate 
maintenance or inspection program changes for their affected fleet(s), 
the FAA has determined that a per-operator estimate is more accurate 
than a per-airplane estimate.
    The FAA estimates the total cost per operator for the new proposed 
actions to be $7,650 (90 work-hours x $85 per work-hour).

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    The FAA determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by:
0
a. Removing Airworthiness Directive (AD) 2020-02-21, Amendment 39-19833 
(85 FR 7860, February 12, 2020), and
0
b. Adding the following new AD:

Dassault Aviation: Docket No. FAA-2020-0980; Product Identifier 
2020-NM-094-AD.

(a) Comments Due Date

    The FAA must receive comments by December 18, 2020.

(b) Affected ADs

    (1) This AD replaces AD 2020-02-21, Amendment 39-19833 (85 FR 
7860, February 12, 2020) (``AD 2020-02-21'').
    (2) This AD affects AD 2010-26-05, Amendment 39-16544 (75 FR 
79952, December 21, 2010) (``AD 2010-26-05'').

(c) Applicability

    This AD applies to all Dassault Aviation Model FALCON 2000 
airplanes, certificated in any category.

(d) Subject

    Air Transport Association (ATA) of America Code 05, Time Limits/
Maintenance Checks.

(e) Reason

    This AD was prompted by a determination that new or more 
restrictive airworthiness limitations are necessary. The FAA is 
issuing this AD to address reduced controllability of the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Retained New Maintenance or Inspection Program Revision With No 
Changes

    This paragraph restates the requirements of paragraph (i) of AD 
2020-02-21, with no changes. Within 90 days after March 18, 2020 
(the effective date of AD 2020-02-21), revise the existing 
maintenance or inspection program, as applicable, to incorporate the 
information specified in Chapter 5-40, Airworthiness Limitations, 
Revision 20, dated November 2018, of the Dassault Aviation Falcon 
2000 Maintenance Manual. The initial compliance time for doing the 
tasks is at the time specified in Chapter 5-40, Airworthiness 
Limitations, Revision 20, dated November 2018, of the Dassault 
Aviation Falcon 2000 Maintenance Manual, or within 90 days after 
March 18, 2020, whichever occurs later, except as required by 
paragraphs (g)(1) through (3) of this AD. The term ``LDG'' in the 
``First Inspection'' column of any table in the service information 
specified in this paragraph means total airplane landings. The term 
``FH'' in the ``First Inspection'' column of any table in the 
service information specified in this paragraph means total flight 
hours. The term ``FC'' in the ``First Inspection'' column of any 
table in the service information specified in this paragraph means 
total flight cycles. The term ``M'' in the ``First Inspection'' 
column of any table in the service information specified in this 
paragraph means months since date of issuance of the original 
airworthiness certificate or original export certificate of 
airworthiness.
    (1) For Task 30-11-09-350-801 identified in the service 
information specified in the introductory text of paragraph (g) of 
this AD, the initial compliance time is the later of the times 
specified in paragraphs (g)(1)(i) and (ii) of this AD.
    (i) At the earlier of the times specified in paragraphs 
(g)(1)(i)(A) and (B) of this AD.
    (A) Prior to the accumulation of 2,400 total flight hours or 
2,000 total flight cycles, whichever occurs first.
    (B) Within 2,400 flight hours or 2,000 flight cycles after April 
7, 2014 (the effective date of AD 2014-03-12, Amendment 39-17749 (79 
FR 11693, March 3, 2014)), whichever occurs first.
    (ii) Within 30 days after April 7, 2014 (the effective date of 
AD 2014-03-12).
    (2) For Task 52-20-00-610-801-01 identified in the service 
information specified in the introductory text of paragraph (g) of 
this AD, the initial compliance time is within 24 months after April 
7, 2014 (the effective date of AD 2014-03-12).
    (3) The limited service life of part number F2MA721512100 is 
3,750 total flight cycles on the part or 6 years since the 
manufacturing date of the part, whichever occurs first.

(h) Retained No Alternative Actions or Intervals With a New Exception

    This paragraph restates the requirements of paragraph (j) of AD 
2020-02-21, with a new exception. Except as required by paragraph 
(i) of this AD, after the existing maintenance or inspection program 
has been revised as required by paragraph (g) of this AD, no 
alternative actions (e.g., inspections) or intervals may be used 
unless the actions or intervals are approved as an AMOC in 
accordance with the procedures specified in paragraph (m)(1) of this 
AD.

(i) New Maintenance or Inspection Program Revision

    Except as specified in paragraph (j) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, European Union Aviation Safety Agency (EASA) AD 
2020-0113, dated May 20, 2020 (``EASA AD 2020-0113''). Accomplishing 
the maintenance or inspection program revision required by this 
paragraph terminates the requirements of paragraph (g) of this AD.

[[Page 69522]]

(j) Exceptions to EASA AD 2020-0113

    (1) The requirements specified in paragraphs (1) and (2) of EASA 
AD 2020-0113 do not apply to this AD.
    (2) Paragraph (3) of EASA AD 2020-0113 specifies revising ``the 
approved AMP'' within 12 months after its effective date, but this 
AD requires revising the existing maintenance or inspection program, 
as applicable, to incorporate the ``limitations, tasks and 
associated thresholds and intervals'' specified in paragraph (3) of 
EASA AD 2020-0113 within 90 days after the effective date of this 
AD.
    (3) The initial compliance time for doing the tasks specified in 
paragraph (3) of EASA AD 2020-0113 is at the applicable ``associated 
thresholds'' specified in paragraph (3) of EASA AD 2020-0113, or 
within 90 days after the effective date of this AD, whichever occurs 
later.
    (4) The provisions specified in paragraphs (4) and (5) of EASA 
AD 2020-0113 do not apply to this AD.
    (5) The ``Remarks'' section of EASA AD 2020-0113 does not apply 
to this AD.

(k) New Provisions for Alternative Actions and Intervals

    After the maintenance or inspection program has been revised as 
required by paragraph (i) of this AD, no alternative actions (e.g., 
inspections) and intervals are allowed unless they are approved as 
specified in the provisions of the ``Ref. Publications'' section of 
EASA AD 2020-0113.

(l) Terminating Action for Certain Actions in AD 2010-26-05

    Accomplishing the actions required by paragraph (g) or (i) of 
this AD terminates the requirements of paragraph (g) of AD 2010-26-
05 for Model FALCON 2000 airplanes only.

(m) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
Large Aircraft Section, International Validation Branch, FAA, has 
the authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the Large Aircraft Section, International Validation 
Branch, send it to the attention of the person identified in 
paragraph (n)(4) of this AD. Information may be emailed to: [email protected].
    (i) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the local flight standards district office/certificate holding 
district office.
    (ii) AMOCs approved previously for AD 2020-02-21 are approved as 
AMOCs for the corresponding provisions of EASA AD 2020-0113 that are 
required by paragraph (i) of this AD.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, Large Aircraft 
Section, International Validation Branch, FAA; or EASA; or Dassault 
Aviation's EASA Design Organization Approval (DOA). If approved by 
the DOA, the approval must include the DOA-authorized signature.

(n) Related Information

    (1) For EASA AD 2020-0113, contact the EASA, Konrad-Adenauer-
Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email 
[email protected]; internet www.easa.europa.eu. You may find this 
EASA AD on the EASA website at https://ad.easa.europa.eu.
    (2) For Dassault service information identified in this AD, 
contact Dassault Falcon Jet Corporation, Teterboro Airport, P.O. Box 
2000, South Hackensack, NJ 07606; phone: 201-440-6700; internet: 
https://www.dassaultfalcon.com.
    (3) You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., 
Des Moines, WA. For information on the availability of this material 
at the FAA, call 206-231-3195. This material may be found in the AD 
docket on the internet at https://www.regulations.gov by searching 
for and locating Docket No. FAA-2020-0980.
    (4) For more information about this AD, contact Tom Rodriguez, 
Aerospace Engineer, Large Aircraft Section, International Validation 
Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone 
and fax 206-231-3226; email [email protected].

    Issued on October 27, 2020.
Lance T. Gant,
Director, Compliance & Airworthiness Division, Aircraft Certification 
Service.
[FR Doc. 2020-24148 Filed 11-2-20; 8:45 am]
BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.