Department of Transportation July 2009 – Federal Register Recent Federal Regulation Documents
Results 101 - 150 of 234
Airworthiness Directives; Boeing Model 747-400 and -400D Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747-400 and -400D series airplanes. This AD requires installing new relays to allow the flightcrew to turn off electrical power to the in-flight entertainment (IFE) system and other non- essential passenger cabin systems through the left and right utility bus switches, and other specified actions. This AD results from an IFE systems review. We are issuing this AD to ensure that the flightcrew is able to turn off electrical power to the IFE system and other non- essential passenger cabin systems through utility bus switches in the flight compartment, in the event of smoke or fumes. The flightcrew's inability to turn off electrical power to the IFE system and other non- essential passenger cabin systems could result in the inability to control smoke or fumes in the airplane flight deck or passenger cabin during a non-normal or emergency situation.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Airbus Model A319, A320, and A321 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 707 Airplanes and Model 720 and 720B Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 707 airplanes and Model 720 and 720B series airplanes. This AD requires performing an operational test of the engine fuel suction feed of the fuel system, and other related testing and corrective actions if necessary. This AD results from a report of in- service occurrences of loss of fuel system suction feed capability, followed by total loss of pressure of the fuel feed system. We are issuing this AD to detect and correct failure of the engine fuel suction feed capability of the fuel system, which could result in multi-engine flameout, inability to restart the engines, and consequent forced landing of the airplane.
Airworthiness Directives; BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Aerospatiale Model SN-601 (Corvette) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A330-301, -321, -322, -341, and -342 Series Airplanes, and Airbus Model A340-211, -212, -213, -311, -312, and -313 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A380-841, -842, and -861 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Miscellaneous Revisions to the Procedures for Handling Petitions for Emergency Waiver of Safety Regulations and the Procedures for Disqualifying Individuals From Performing Safety-Sensitive Functions
On May 19, 2009, FRA published a direct final rule in the Federal Register which made miscellaneous revisions to the procedures for obtaining waivers from a safety rule, regulation, or standard during an emergency situation or an emergency event, and the procedures for disqualifying individuals from performing safety-sensitive functions. FRA did not receive any comments or requests for an oral hearing on the direct final rule. Therefore, FRA is issuing this document to confirm that the direct final rule will take effect on July 20, 2009, the date specified in the rule.
Rescission of Notice of Intent
This notice rescinds the previous notice of intent issued on April 2, 2001 to prepare an environmental impact statement for a proposed rail corridor improvement project on the BNSF Railway main line between the City of Kelso and Martin's Bluff (south of Kalama, Washington).
Airworthiness Directives; Bombardier Model DHC-8-102, DHC-8-103, DHC-8-106, DHC-8-201, DHC-8-202, DHC-8-301, DHC-8-311, and DHC-8-315 Airplanes Equipped With a Cockpit Door Electronic Strike System Installed in Accordance With Supplemental Type Certificate (STC) ST02014NY
The FAA is correcting an error in an existing airworthiness directive (AD) that was published in the Federal Register on April 7, 2009 (74 FR 15665). The error resulted in an incorrect product identification line in the regulatory portion of the AD. This AD applies to the transport category airplanes listed above. This AD requires modifying the electronic strike system of the cockpit door.
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the OMB. Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections.
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on February 2, 2009, vol. 74, no. 20, pages 5884-5885. The information determines if applicant proposals for conducting commercial space launches can he accomplished according to regulations issued by the Office of the Associate Administrator for Commercial Space Transportation.
Federal Motor Vehicle Safety Standards; Door Locks and Door Retention Components
This final rule delays the compliance date of the sliding door provisions of a February 6, 2007 final rule, from September 1, 2009 to September 1, 2010. The February 6, 2007, final rule amended the Federal motor vehicle safety standard on door locks and door retention components to add and update requirements and test procedures and to harmonize with the world's first global technical regulation for motor vehicles. NHTSA received four petitions for reconsideration of that final rule, including two that requested a delay in the effective date of the sliding door provisions of the rule, and others which raised concerns about some of the new test requirements and procedures. To accommodate manufacturers' design and production cycles while allowing the agency more time to analyze the petitions in regards to other issues, the agency is delaying the compliance date of the sliding door provisions of S4.2.2 until September 1, 2010.
Office of Hazardous Materials Safety; Notice of Delays in Processing of Special Permits Applications
In accordance with the requirements of 49 U.S.C. 5117(c), PHMSA is publishing the following list of special permit applications that have been in process for 180 days or more. The reason(s) for delay and the expected completion date for action on each application is provided in association with each identified application.
Notice of Order Soliciting Community Proposals
The Department of Transportation is soliciting proposals from communities or consortia of communities interested in receiving a grant under the Small Community Air Service Development Program. The full text of the Department's order is attached to this document. There are two mandatory requirements for filing of applications, both of which must be completed for a community's application to be deemed timely and considered by the Department. The first requirement is the filing of an Application for Federal Domestic Assistance (SF424) through https:// www.grants.gov. The second is the submission of the community's proposal as an attachment to its SF424. Applicants must complete a one- time registration at https://www.grants.gov, a process required by grants.gov that can take up to three weeks to complete. For this reason, applicants should register with grants.gov as soon as possible to ensure they can meet the application deadline.
Agency Information Collection Activity Under OMB Review
The Federal Transit Administration invites public comment about our intention to request the Office of Management and Budget's (OMB's) approval to renew the following information collection: 49 U.S.C. Section 5317New Freedom Program.
Alaska Railroad Corporation-Construction and Operation Exemption-a Rail Line Extension to Port MacKenzie, AK
The Alaska Railroad Corporation (ARRC or Applicant) petitioned the Surface Transportation Board (Board) pursuant to 49 U.S.C. 10502 for authority to construct and operate a new rail line from Matanuska- Susitna Borough's (MSB) Port MacKenzie to ARRC's existing main line between Wasilla and north of Willow, Alaska. The project would involve the construction and operation of approximately 30 to 45 miles of new rail to the main line track. Figure 1 shows ARRC's existing track and the proposed rail line extension from Port MacKenzie to ARRC's existing main line (All figures are available for viewing on the Board's Web site at https://www.stb.dot.gov by going to ``Environmental Matters,'' then selecting ``Key Cases'' in the dropdown; and then when the next page appears, clicking ``Alaska RailroadPort MacKenzie Rail Extension).
Pipeline Safety: Notice of Technical Pipeline Safety Advisory Committee Meetings
This notice announces a public meeting of the Technical Pipeline Safety Standards Committee (TPSSC) and of the Technical Hazardous Liquid Pipeline Safety Standards Committee (THLPSSC).
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on February 2, 2009, vol. 74, no. 20, page 5884. Title 49 U.S.C., Section 44702 authorizes issuance of air carrier operating certificates. 14 CFR prescribes requirements for Air Carrier/ Commercial Operators. The info collected shows compliance & applicant eligibility.
Airworthiness Directives; Boeing Model 737-600, -700, -700C, -800, -900 and -900ER Series Airplanes
We are revising an earlier proposed airworthiness directive (AD) for all Boeing Model 737-600, -700, -700C, -800, -900 and -900ER series airplanes. That supplemental NPRM would have required a one-time inspection to determine the part numbers of the aero/fire seals of the blocker doors on the thrust reverser torque boxes on the engines, and replacing affected aero/fire seals with new improved aero/fire seals. This action resulted from a report that the top 3 inches of the aero/ fire seals of the blocker doors on the thrust reverser torque boxes are not fireproof. This second supplemental NPRM revises the first supplemental NPRM by changing the compliance time for the replacement. We are proposing this second supplemental NPRM to prevent a fire in the fan compartment (a fire zone) from migrating through the seal to a flammable fluid in the thrust reverser actuator compartment (a flammable fluid leakage zone), which could result in an uncontrolled fire.
Airworthiness Directives; Airbus Model A310-221, -222, -322, -324, and -325 Airplanes, and Model A300B4-620, B4-622, B4-622R, F4-605R, and F4-622R Airplanes, Equipped With Pratt & Whitney PW4000 or JT9D-7R4 Series Engines
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Construcciones Aeronauticas, S.A. (CASA), Model C-212-CB, C-212-CC, C-212-CD, and C-212-CE Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; 328 Support Services GmbH Dornier Model 328-100 and -300 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A310-203, -221, -222 Airplanes and Model A300 F4-605R and -622R Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to exempt 23 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs). The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision standard. The Agency has concluded that granting these exemptions will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these CMV drivers.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 20 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Request for Applications for the Federal Motor Carrier Safety Administration Medical Review Board
FMCSA solicits applications from interested physicians to serve on the Agency's Medical Review Board (MRB). The MRB, authorized by the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU), provides scientific advice to the Secretary of Transportation (the Secretary) and the FMCSA Administrator on medical issues relating to the physical qualification standards for commercial motor vehicle (CMV) drivers. In 2006, the Secretary appointed five physicians for 2-year terms to serve on the MRB. In 2008, the Secretary reappointed the physicians to the MRB, with the chairperson currently serving a 2-year term, and the other four members serving staggered 1-year terms. In 2009, the Secretary appointed two new members to a 2-year term, and reappointed two of the current members to a 1-year term to ensure the MRB continued to operate with five active members. The term of the chairman and two members will expire in 2010. Therefore, in 2010, the Secretary will appoint three new MRB members to fill the vacancies created when the three current members' terms expire. In addition, the Secretary will appoint alternates to serve if one or more of the appointed MRB members is unable to complete his/her term. The appointment of alternates ensures that the MRB will operate continuously with five active members.
Airworthiness Directives; Boeing Model 767 Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 767 series airplanes. This proposed AD would require inspections for scribe lines in the fuselage skin at skin lap joints, the skin at certain external approved repairs, the skin around external features such as antennas, and the skin at decals; and related investigative and corrective actions if necessary. This proposed AD results from reports of scribe lines found at skin lap joints and butt joints, around external repairs and antennas, and at locations where external decals had been cut. We are proposing this AD to detect and correct scribe lines, which can develop into fatigue cracks in the skin and cause sudden decompression of the airplane.
Federal Aviation Administration (FAA) Sponsored Technical Standard Order (TSO) National Workshop
This FAA sponsored workshop will bring together individuals from FAA Headquarters, Certification Directorates, including the Aircraft Certification Offices, Industry and other Aviation Authorities including the European Aviation Safety Agency (EASA), and Transport Canada Civil Aviation (TCCA) for a collaborative discussion about TSO/ European (E)TSO programs.
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on February 2, 2009, vol. 74, no. 20, page 5885. This information is used to issue special flight authorizations for non-revenue operations of Stage 2 airplanes at U.S. airports.
Qualification of Drivers; Exemption Renewals; Vision
FMCSA previously announced its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 19 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemptions will provide a level of safety that will be equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Aviation Rulemaking Advisory Committee-New Task
The FAA assigned the Aviation Rulemaking Advisory Committee (ARAC) a new task to develop maintenance requirements for aircraft used in commercial air tour operations. This is in response to National Transportation Safety Board (NTSB) recommendations. This notice is to inform the public of the new ARAC activity and solicit membership to a new Commercial Air Tour Maintenance (CATM) Working Group to support ARAC on this new task.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A319, A320, and A321 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Part 121 Pilot Age Limit
This action amends the Code of Federal Regulations to conform certain regulations with recent legislation raising the upper age limit for pilots serving in domestic, flag, and supplemental operations until they reach their 65th birthday. The legislation, known as the ``Fair Treatment for Experienced Pilots Act,'' raised the upper age limit from age 60 to age 65. The legislation became effective December 13, 2007. The intended effect of this action is to update the Code of Federal Regulations to reflect the recent legislation.
Airworthiness Directives; Construcciones Aeronauticas, S.A. (CASA), Model CN-235 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 28 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the applications described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Requests for modification of special permits (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix ``M'' denote a modification request. These applications have been separated from the new application for special permits to facilitate processing.
Operating Limitations at John F. Kennedy International Airport and Newark Liberty International Airport
This action announces a limited waiver of the minimum usage requirements that apply to Operating Authorizations at John F. Kennedy International Airport (JFK) and Newark Liberty International Airport (EWR) for nonstop flights to or from Mexico. This policy is effective from April 27, 2009, through September 12, 2009.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
