Occupational Safety and Health Administration – Federal Register Recent Federal Regulation Documents

In this notice, OSHA announces its final decision to expand the scope of recognition for Curtis-Strauss LLC, as a Nationally Recognized Testing Laboratory (NRTL).

In this notice, OSHA announces its final decision to expand the scope of recognition for Intertek Testing Service NA, Inc., as a Nationally Recognized Testing Laboratory (NRTL).

The Occupational Safety and Health Administration (OSHA) is amending its existing standards for occupational exposure to beryllium and beryllium compounds. OSHA has determined that employees exposed to beryllium at the previous permissible exposure limits face a significant risk of material impairment to their health. The evidence in the record for this rulemaking indicates that workers exposed to beryllium are at increased risk of developing chronic beryllium disease and lung cancer. This final rule establishes new permissible exposure limits of 0.2 micrograms of beryllium per cubic meter of air (0.2 [mu]g/m\3\) as an 8-hour time-weighted average and 2.0 [mu]g/m\3\ as a short-term exposure limit determined over a sampling period of 15 minutes. It also includes other provisions to protect employees, such as requirements for exposure assessment, methods for controlling exposure, respiratory protection, personal protective clothing and equipment, housekeeping, medical surveillance, hazard communication, and recordkeeping. OSHA is issuing three separate standardsfor general industry, for shipyards, and for constructionin order to tailor requirements to the circumstances found in these sectors.

OSHA solicits public comments concerning its proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Standard on Presence Sensing Device Initiation (29 CFR 1910.217(h)).

OSHA is amending its recordkeeping regulations to clarify that the duty to make and maintain accurate records of work-related injuries and illnesses is an ongoing obligation. The duty to record an injury or illness continues for as long as the employer must keep records of the recordable injury or illness; the duty does not expire just because the employer fails to create the necessary records when first required to do so. The amendments consist of revisions to the titles of some existing sections and subparts and changes to the text of some existing provisions. The amendments add no new compliance obligations and do not require employers to make records of any injuries or illnesses for which records are not currently required to be made. The amendments in this rule are adopted in response to a decision of the United States Court of Appeals for the District of Columbia Circuit. In that case, a majority held that the Occupational Safety and Health Act does not permit OSHA to impose a continuing recordkeeping obligation on employers. One judge filed a concurring opinion disagreeing with this reading of the statute, but finding that the text of OSHA's recordkeeping regulations did not impose continuing recordkeeping duties. OSHA disagrees with the majority's reading of the law, but agrees that its recordkeeping regulations were not clear with respect to the continuing nature of employers' recordkeeping obligations. This final rule is designed to clarify the regulations in advance of possible future federal court litigation that could further develop the law on the statutory issues addressed in the D.C. Circuit's decision.

In this notice, OSHA announces its final decision to expand the scope of recognition for Intertek Testing Services NA, Inc. as a Nationally Recognized Testing Laboratory (NRTL).

In this notice, OSHA announces its final decision to expand the scope of recognition for Underwriters Laboratories, Inc., as a Nationally Recognized Testing Laboratory (NRTL).

On October 4, 2016, OSHA published a Notice of Proposed Rulemaking (NPRM) titled ``Standards Improvement Project-Phase IV.'' The period for submitting comments is being extended 30 days to allow parties affected by the rule more time to review the proposed rule and collect information and data necessary for comments.

OSHA is revising and updating its general industry standards on walking-working surfaces to prevent and reduce workplace slips, trips, and falls, as well as other injuries and fatalities associated with walking-working surface hazards. The final rule includes revised and new provisions addressing, for example, fixed ladders; rope descent systems; fall protection systems and criteria, including personal fall protection systems; and training on fall hazards and fall protection systems. In addition, the final rule adds requirements on the design, performance, and use of personal fall protection systems. The final rule increases consistency between the general industry and construction standards, which will make compliance easier for employers who conduct operations in both industry sectors. Similarly, the final rule updates requirements to reflect advances in technology and to make them consistent with more recent OSHA standards and national consensus standards. OSHA has also reorganized the requirements and incorporated plain language in order to make the final rule easier to understand and follow. The final rule also uses performance-based language whenever possible to give employers greater compliance flexibility.

In this notice, OSHA announces the application of MET Laboratories, Inc. for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the Agency's preliminary finding to grant the application. Additionally, OSHA proposed to add a new test standing to the NRTL Program's List of Appropriate Test Standards.

In this notice, OSHA announces the application of Intertek Testing Services NA, Inc. for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the Agency's preliminary finding to grant the application.

This notice is to advise interested persons that on Wednesday, November 16, 2016, OSHA will conduct a public meeting to informally discuss potential updates to the Hazard Communication Standard. The purpose of this meeting is to invite stakeholders to identify topics or issues they would like OSHA to consider in the rulemaking.

This document provides the final text of regulations governing employee protection (retaliation or whistleblower) claims under section 1558 of the Affordable Care Act, which added section 18C to the Fair Labor Standards Act to provide protections to employees who may have been subject to retaliation for seeking assistance under certain affordability assistance provisions (for example, health insurance premium tax credits) or for reporting potential violations of the Affordable Care Act's consumer protections (for example, the prohibition on rescissions). An interim final rule (IFR) governing these provisions and request for comments was published in the Federal Register on February 27, 2013. Thirteen comments were received; eleven were responsive to the IFR. This rule responds to those comments and establishes the final procedures and time frames for the handling of retaliation complaints under section 18C, including procedures and time frames for employee complaints to the Occupational Safety and Health Administration (OSHA), investigations by OSHA, appeals of OSHA determinations to an administrative law judge (ALJ) for a hearing de novo, hearings by ALJs, review of ALJ decisions by the Administrative Review Board (ARB) (acting on behalf of the Secretary of Labor), and judicial review of the Secretary of Labor's (Secretary's) final decision. It also sets forth the Secretary's interpretations of the Affordable Care Act whistleblower provision on certain matters.

OSHA is proposing to add two modified PortaCount[supreg] quantitative fit-testing protocols to its Respiratory Protection Standard. The proposed protocols would apply to employers in general industry, shipyard employment, and the construction industry. Both proposed protocols are variations of the existing OSHA-accepted PortaCount[supreg] protocol, but differ from it by the exercise sets, exercise duration, and sampling sequence. If approved, the modified PortaCount[supreg] protocols would be alternatives to the existing quantitative fit-testing protocols already listed in an appendix of the Respiratory Protection Standard. In addition, OSHA is proposing to amend an appendix to clarify that PortaCount[supreg] fit test devices equipped with the N95-CompanionTM Technology are covered by the approved PortaCount[supreg] protocols.

OSHA solicits public comments concerning its proposal to extend the Office of Management and Budget's (OMB) approval of the collections of information contained in the Occupational Exposure to Noise Standard (29 CFR 1910.95).

OSHA solicits public comments concerning its proposal to extend OMB approval of the information collection requirements contained in the Construction Standards on Fall Protection Systems Criteria and Practices (29 CFR 1926.502), and Training Requirements (29 CFR 1926.503).

OSHA solicits public comments concerning its proposal to extend OMB approval of the information collection requirement contained in the Aerial Lifts Standard. The only information collection requirement in the Aerial Lifts Standard is a certification provision, paragraph (a)(2). This provision requires an employer who modifies an aerial lift for a use not intended by the lift manufacturer (``field modified aerial lift'') to obtain from that manufacturer, or an equivalent entity (such as a nationally-recognized laboratory), a written certificate stating that: The modification conforms to the applicable provisions of ANSI A92.2-1969 and OSHA's Aerial Lifts Standard; and the modified aerial lift is at least as safe as it was before modification. Employers who modify an aerial lift for uses other than those provided by the manufacturer must obtain a certificate from the manufacturer or equivalent entity certifying that the modification is in conformance with applicable American National Standards Institute (ANSI) standards and OSHA's Aerial Lifts Standard, and that the equipment is as safe as it was prior to the modification.

OSHA solicits public comments concerning its proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements specified in the Welding, Cutting, and Brazing Standard (29 CFR part 1910, subpart Q).

ACCSH will meet November 30-December 1, 2016, in Washington, DC. OSHA also announces the Assistant Secretary of Labor's request for nominations for membership on ACCSH.

In this notice, OSHA announces its final decision to expand the scope of recognition for SGS North America, Inc., as a Nationally Recognized Testing Laboratory (NRTL).

In this notice, OSHA announces the application of Intertek Testing Services NA, Inc. for expansion of its recognition as a Nationally Recognized Testing Laboratory (NRTL) and presents the Agency's preliminary finding to grant the application. Additionally, this notice proposes to add a new recognized testing standard to the NRTL Program's List of Appropriate Test Standards.

OSHA solicits public comments concerning its proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements contained in the Access to Employee Exposure and Medical Records Standard (29 CFR 1910.1020).

OSHA solicits public comments concerning its proposal to extend the Office of Management and Budget's (OMB) approval of the information collection requirements contained in the Crawler, Locomotive, and Truck Cranes Standard (29 CFR 1910.180).

The Federal Advisory Council on Occupational Safety and Health (FACOSH) will meet Thursday, September 8, 2016, in Washington, DC.

The Assistant Secretary of Labor for Occupational Safety and Health invites interested individuals to submit nominations for membership on FACOSH.