OSHA's Conflict of Interest and Disclosure Form; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements, 67004-67006 [2016-23552]
Download as PDF
<![CDATA[
67004
Federal Register / Vol. 81, No. 189 / Thursday, September 29, 2016 / Notices
Section 1910.255(e) requires that a
periodic inspection of resistance
welding equipment be made by
qualified maintenance personnel, and
that a certification record be generated
and maintained. The certification shall
include the date of the inspection, the
signature of the person who performed
the inspection and the serial number, or
other identifier, for the equipment
inspected. The record shall be made
available to an OSHA inspector upon
request. The maintenance inspection
ensures that welding equipment is in
safe operating condition while the
maintenance record provides evidence
to workers and Agency compliance
officers that employers performed the
required inspections.
mstockstill on DSK3G9T082PROD with NOTICES
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
The Agency requests an adjustment
increase of 97 burden hours (from 5,635
burden hours to 5,732 burden hours)
associated with the collection of
information in the Welding, Cutting,
and Brazing Standard. OSHA will
summarize the comments submitted in
response to this notice, and will include
this summary in its request to OMB to
extend the approval of the information
collection requirements contained in the
Standard.
Type of Review: Extension of a
currently approved collection.
Title: Welding, Cutting, and Brazing
(29 CFR part, subpart Q).
OMB Control Number: 1218–0207.
Affected Public: Business or other forprofits.
Number of Respondents: 20,471.
Frequency of Responses: On occasion.
Total Responses: 81,884.
Average Time per Response: OSHA
estimates it will take 1 minute (.02 hour)
to maintain the inspection certification
record to 5 minutes (.08 hour) for each
welder to perform the inspection
periodically (semi-annually).
VerDate Sep<11>2014
18:51 Sep 28, 2016
Jkt 238001
Estimated Total Burden Hours: 5,732.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile; or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number for this
ICR (Docket No. OSHA–2010–0037).
You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and date of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the https://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the Web site, and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
PO 00000
Frm 00086
Fmt 4703
Sfmt 4703
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on September
26, 2016.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2016–23570 Filed 9–28–16; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2009–0042]
OSHA’s Conflict of Interest and
Disclosure Form; Extension of the
Office of Management and Budget’s
(OMB) Approval of Information
Collection (Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
contained in the proposed Conflict of
Interest (COI) and Disclosure Form,
which will be used to determine
whether or not a conflict of interest
exists for a potential peer review panel
member.
DATES: Comments must be submitted
(postmarked, sent, or received) by
November 28, 2016.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, OSHA
Docket No. OSHA–2009–0042,
Occupational Safety and Health
Administration, U.S. Department of
Labor, Room N–2625, 200 Constitution
Avenue NW., Washington, DC 20210.
Deliveries (hand, express mail,
messenger, and courier service) are
accepted during the Department of
SUMMARY:
E:\FR\FM\29SEN1.SGM
29SEN1
Federal Register / Vol. 81, No. 189 / Thursday, September 29, 2016 / Notices
Labor’s and Docket Office’s normal
business hours, 8:15 a.m. to 4:45 p.m.,
e.t.
Instructions: All submissions must
include the Agency name and OSHA
docket number (OSHA–2009–0042) for
the Information Collection Request
(ICR). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at https://www.regulations.gov.
For further information on submitting
comments see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor, Room
N–3609, 200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
mstockstill on DSK3G9T082PROD with NOTICES
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (PRA)
(44 U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the OSH
Act or for developing information
regarding the causes and prevention of
occupational injuries, illnesses, and
VerDate Sep<11>2014
18:51 Sep 28, 2016
Jkt 238001
accidents (29 U.S.C. 657). The OSH Act
also requires OSHA to obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
OSHA conducts peer reviews to
review a draft product for quality by
specialists in the field who were not
involved in producing the draft. The
selection of participants in a peer
review is based on expertise, with due
consideration of independence. The
Office of Management and Budget
published the Final Information Quality
Bulletin for Peer Review on December
15, 2004. The Bulletin states ‘‘. . . the
agency must address reviewers’
potential conflicts of interest (including
those stemming from ties to regulated
businesses and other stakeholders) and
independence from the agency.’’ The
Bulletin requires agencies to adopt or
adapt the committee selection policies
employed by the National Academy of
Sciences (NAS) when selecting peer
reviewers who are not Government
employees. To fulfill this requirement,
OSHA has developed a Conflict of
Interest (COI) and Disclosure Form,
based on NAS’ Conflict of Interest
Disclosure form. This form will be used
to determine whether or not a conflict
exists for a potential peer review panel
member.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
There are no changes in burden hours
from the previous Information
Collection Request for obtaining the
necessary background information and
disclosure of conflict of interest
information to ensure that invited
experts are not compromised. There are
no costs as discussed under Item 13 of
the Supporting Statement.
PO 00000
Frm 00087
Fmt 4703
Sfmt 4703
67005
Type of Review: Extension of a
currently approved collection.
Title: OSHA’s Conflict of Interest
(COI) and Disclosure Form.
OMB Control Number: 1218–0255.
Affected Public: Individuals and
Households.
Number of Respondents: 36.
Frequency of Responses: On occasion.
Total Responses: 36.
Average Time per Response: OSHA
estimates it will take one-half hour to
complete the COI Short form, and one
(1) hour to complete the COI Long form.
Estimated Total Burden Hours: 27.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number for the
ICR (Docket No. OSHA–2009–0042).
You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and dates of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the https://
E:\FR\FM\29SEN1.SGM
29SEN1
67006
Federal Register / Vol. 81, No. 189 / Thursday, September 29, 2016 / Notices
www.regulations.gov Web site to
submitcomments and access the docket
is available at the Web site’s ‘‘User
Tips’’ link. Contact the OSHA Docket
Office for information about materials
not available from the Web site and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 1–2012 (77 FR 3912).
Signed at Washington, DC, on September
26, 2016.
David Michaels,
Assistant Secretary of Labor, for Occupational
Safety and Health.
[FR Doc. 2016–23552 Filed 9–28–16; 8:45 am]
BILLING CODE 4510–26–P
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2009–0045]
Aerial Lifts Standard; Extension of the
Office of Management and Budget’s
(OMB) Approval of Information
Collection (Paperwork) Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
extend OMB approval of the
information collection requirement
contained in the Aerial Lifts Standard.
The only information collection
requirement in the Aerial Lifts Standard
is a certification provision, paragraph
(a)(2). This provision requires an
employer who modifies an aerial lift for
a use not intended by the lift
manufacturer (‘‘field modified aerial
lift’’) to obtain from that manufacturer,
or an equivalent entity (such as a
nationally-recognized laboratory), a
written certificate stating that: The
modification conforms to the applicable
provisions of ANSI A92.2–1969 and
OSHA’s Aerial Lifts Standard; and the
modified aerial lift is at least as safe as
it was before modification.
Employers who modify an aerial lift
for uses other than those provided by
the manufacturer must obtain a
certificate from the manufacturer or
equivalent entity certifying that the
modification is in conformance with
mstockstill on DSK3G9T082PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
18:51 Sep 28, 2016
Jkt 238001
applicable American National Standards
Institute (ANSI) standards and OSHA’s
Aerial Lifts Standard, and that the
equipment is as safe as it was prior to
the modification.
DATES: Comments must be submitted
(postmarked, sent, or received) by
November 28, 2016.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, OSHA
Docket No. OSHA–2009–0045,
Occupational Safety and Health
Administration, U.S. Department of
Labor, Room N–2625, 200 Constitution
Avenue NW., Washington, DC 20210.
Deliveries (hand, express mail,
messenger, and courier service) are
accepted during the Department of
Labor’s and Docket Office’s normal
business hours, 8:15 a.m. to 4:45 p.m.,
e.t.
Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2009–0045) for
the Information Collection Request
(ICR). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at https://www.regulations.gov.
For further information on submitting
comments see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the Web site. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the address below to obtain a copy of
the ICR.
PO 00000
Frm 00088
Fmt 4703
Sfmt 4703
FOR FURTHER INFORMATION CONTACT:
Directorate of Construction, OSHA, U.S.
Department of Labor, Room N–3468,
200 Constitution Avenue NW.,
Washington, DC 20210; telephone (202)
693–2020.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995
(PRA–95) (44 U.S.C. 3506(c)(2)(A)). This
program ensures that information is in
the desired format, reporting burden
(time and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the OSH
Act or for developing information
regarding the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires OSHA to obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
The certification requirement
specified in the Aerial Lifts Standard
demonstrates that the manufacturer or
an equally-qualified entity has assessed
a modified aerial lift and found that it
was safe for use by, or near, workers;
and that it would provide workers with
a level of protection at least equivalent
to the protection afforded by the lift
prior to modification.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
E:\FR\FM\29SEN1.SGM
29SEN1
]]>Agencies
[Federal Register Volume 81, Number 189 (Thursday, September 29, 2016)]
[Notices]
[Pages 67004-67006]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-23552]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2009-0042]
OSHA's Conflict of Interest and Disclosure Form; Extension of the
Office of Management and Budget's (OMB) Approval of Information
Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning its proposal to
extend the Office of Management and Budget's (OMB) approval of the
information collection requirements contained in the proposed Conflict
of Interest (COI) and Disclosure Form, which will be used to determine
whether or not a conflict of interest exists for a potential peer
review panel member.
DATES: Comments must be submitted (postmarked, sent, or received) by
November 28, 2016.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit a copy of your comments and
attachments to the OSHA Docket Office, OSHA Docket No. OSHA-2009-0042,
Occupational Safety and Health Administration, U.S. Department of
Labor, Room N-2625, 200 Constitution Avenue NW., Washington, DC 20210.
Deliveries (hand, express mail, messenger, and courier service) are
accepted during the Department of
[[Page 67005]]
Labor's and Docket Office's normal business hours, 8:15 a.m. to 4:45
p.m., e.t.
Instructions: All submissions must include the Agency name and OSHA
docket number (OSHA-2009-0042) for the Information Collection Request
(ICR). All comments, including any personal information you provide,
are placed in the public docket without change, and may be made
available online at https://www.regulations.gov. For further information
on submitting comments see the ``Public Participation'' heading in the
section of this notice titled SUPPLEMENTARY INFORMATION.
Docket: To read or download comments or other material in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the address above. All documents in the docket (including this Federal
Register notice) are listed in the https://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download from the Web site. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may also contact Theda Kenney at
the address below to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609,
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accordance with the Paperwork Reduction Act
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and OSHA's
estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also
requires OSHA to obtain such information with minimum burden upon
employers, especially those operating small businesses, and to reduce
to the maximum extent feasible unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
OSHA conducts peer reviews to review a draft product for quality by
specialists in the field who were not involved in producing the draft.
The selection of participants in a peer review is based on expertise,
with due consideration of independence. The Office of Management and
Budget published the Final Information Quality Bulletin for Peer Review
on December 15, 2004. The Bulletin states ``. . . the agency must
address reviewers' potential conflicts of interest (including those
stemming from ties to regulated businesses and other stakeholders) and
independence from the agency.'' The Bulletin requires agencies to adopt
or adapt the committee selection policies employed by the National
Academy of Sciences (NAS) when selecting peer reviewers who are not
Government employees. To fulfill this requirement, OSHA has developed a
Conflict of Interest (COI) and Disclosure Form, based on NAS' Conflict
of Interest Disclosure form. This form will be used to determine
whether or not a conflict exists for a potential peer review panel
member.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the Agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply;
for example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
There are no changes in burden hours from the previous Information
Collection Request for obtaining the necessary background information
and disclosure of conflict of interest information to ensure that
invited experts are not compromised. There are no costs as discussed
under Item 13 of the Supporting Statement.
Type of Review: Extension of a currently approved collection.
Title: OSHA's Conflict of Interest (COI) and Disclosure Form.
OMB Control Number: 1218-0255.
Affected Public: Individuals and Households.
Number of Respondents: 36.
Frequency of Responses: On occasion.
Total Responses: 36.
Average Time per Response: OSHA estimates it will take one-half
hour to complete the COI Short form, and one (1) hour to complete the
COI Long form.
Estimated Total Burden Hours: 27.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) Electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other material must identify the Agency name
and the OSHA docket number for the ICR (Docket No. OSHA-2009-0042). You
may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify your electronic comments
by your name, date, and the docket number so the Agency can attach them
to your comments.
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as social security numbers and
dates of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted
material) is not publicly available to read or download from this Web
site. All submissions, including copyrighted material, are available
for inspection and copying at the OSHA Docket Office. Information on
using the https://
[[Page 67006]]
www.regulations.gov Web site to submitcomments and access the docket is
available at the Web site's ``User Tips'' link. Contact the OSHA Docket
Office for information about materials not available from the Web site
and for assistance in using the Internet to locate docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH, Assistant Secretary of Labor for
Occupational Safety and Health, directed the preparation of this
notice. The authority for this notice is the Paperwork Reduction Act of
1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012
(77 FR 3912).
Signed at Washington, DC, on September 26, 2016.
David Michaels,
Assistant Secretary of Labor, for Occupational Safety and Health.
[FR Doc. 2016-23552 Filed 9-28-16; 8:45 am]
BILLING CODE 4510-26-P
