Federal Aviation Administration 2022 – Federal Register Recent Federal Regulation Documents

The FAA is correcting a final rule published in the Federal Register on July 11, 2022, that established RNAV route T-390 in the vicinity of St. Paul Island, AK. In the description of T-390, the final rule identified the ZEBUV, AK route point as a waypoint (WP), in error. This action makes an editorial corrections to all references of the ZEBUV, AK, WP to change them to the ZEBUV, AK, Fix to match the FAA's aeronautical database information.

This action proposes to amend the Class E airspace at Bloomfield, IA. The FAA is proposing this action as the result of an airspace review as part of the decommissioning of the Bloomfield non- directional beacon (NDB).

This notice announces a meeting of the NextGen Advisory Committee (NAC).

The FAA proposes to adopt a new airworthiness directive (AD) for all Learjet, Inc., Model 45 airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing inspection program to incorporate reduced inspection intervals for the anti-ice manifold assembly. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400 series airplanes. This AD was prompted by a report that after a certain circuit breaker tripped, power to the two pitot-static (P/S) probe heaters on the right-hand side was lost, and the flightcrew discovered conflicting procedures in the flightcrew operations manual/quick reference handbook (FCOM/QRH). This AD requires revising the existing airplane flight manual (AFM) to incorporate procedures to be applied during P/S probe heater failure conditions. The FAA is issuing this AD to address the unsafe condition on these products.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

These special conditions are issued for the Dassault Aviation (Dassault) Model Falcon 6X airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is an electronic flight-control system (EFCS) that incorporates full-time, normal load-factor limiting, designed to prevent the pilot from inadvertently or intentionally exceeding the positive or negative airplane limit load factor. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the Duluth Airport Authority (DAA) for Duluth International Airport (DLH) under the provisions of the Aviation Safety and Noise Abatement Act and FAA regulations are in compliance with applicable requirements. The FAA also announces that it is reviewing a proposed noise compatibility program that was submitted for DLH in conjunction with the noise exposure map, and that this program will be approved or disapproved on or before October 8, 2022.

The FAA is adopting a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation (Gulfstream) Model GV and GV-SP airplanes. This AD was prompted by corrosion of the horizontal stabilizer lower bonded skin assemblies. This AD requires inspecting the horizontal stabilizer lower skin and associated bonded doublers and bonded stringers, repairing any area with corrosion beyond allowable damage limits, and incorporating revisions to the airworthiness limitations section (ALS) in the existing aircraft maintenance manual (AMM) or progressive maintenance program. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to rule and invites public comment on the request to release and sell a 4.81 acre parcel and a .016 acre parcel of federally obligated airport property at the Malden Regional Airport & Industrial Park (MAW), Malden, Missouri, under the provisions agency regulations.

These special conditions are issued for the Dassault Aviation (Dassault) Model Falcon 6X Airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is a high speed protection system that limits nose-down pilot authority at speeds above VC/ MC. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This notice announces a meeting of the Research, Engineering, and Development Advisory Committee (REDAC).

The FAA has determined to extend through October 29, 2022, the Coronavirus (COVID-19)-related limited, conditional waiver of the minimum slot usage requirement at John F. Kennedy International Airport (JFK), New York LaGuardia Airport (LGA), and Ronald Reagan Washington National Airport (DCA) that the FAA has already made available through March 26, 2022, for international operations only. Similarly, the FAA has determined to extend through October 29, 2022, its COVID-19-related limited, conditional policy for prioritizing flights canceled at designated International Air Transport Association (IATA) Level 2 airports in the United States, for purposes of establishing a carrier's operational baseline in the next corresponding season, for international operations only. These IATA Level 2 airports include Chicago O'Hare International Airport (ORD), Newark Liberty International Airport (EWR), Los Angeles International Airport (LAX), and San Francisco International Airport (SFO). This relief is limited to slots and approved operating times used by any carrier for international operations only, through October 29, 2022, and will be subject to the same terms and conditions, that the FAA has already applied to the relief that remains available through March 26, 2022.

The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350D, EC130B4, and EC130T2 helicopters. This proposed AD was prompted by the identification of certain parts needing maintenance actions, including life limits and maintenance tasks. This proposed AD would require incorporating into maintenance records requirements (airworthiness limitations), as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) 2017-15-06, which applies to British Aerospace Regional Aircraft Model HP.137 Jetstream Mk.1, Jetstream Series 200 and 3101, and Jetstream Model 3201 airplanes. AD 2017-15-06 requires repetitively inspecting the main landing gear (MLG) for cracks and, if cracks are found, replacing the MLG with an airworthy part. Since the FAA issued AD 2017- 15-06, the Civil Aviation Authority (CAA) of the United Kingdom superseded the mandatory continuing airworthiness information (MCAI) issued by the European Aviation Safety Agency (EASA) to correct an unsafe condition on these products. This proposed AD would retain the initial inspection and the calculation of hours time-in-service to flight cycle (FC) actions required by AD 2017-15-06, but would decrease the repetitive inspection interval time from 1,200 flight cycles to 900 flight cycles. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA announces the special class airworthiness criteria for the Flytrex, Inc. Model FTX-M600P unmanned aircraft (UA). This document sets forth the airworthiness criteria the FAA finds to be appropriate and applicable for the UA design.

The Federal Aviation Administration is requesting public comment on Lancaster Airport Authority's (LAA) request to change 5 acres of airport property from aeronautical use to non-aeronautical use. The parcel was purchased as part of a larger parcel with AIP grants 3-42-0049-022-2002 and 3-42-0049-023-2002. The property was purchased as part of a road relocation for the Runway 8-26 extension project and is located in an area that would be difficult for future aeronautical development. The LAA is requesting approval to release the parcel for permanent non-aeronautical use to erect a vehicle maintenance garage facility. The parcel is identified as 3E on the Airport Layout Plan (ALP). The proposed facility is not currently noted on the ALP, however, if approved, the ALP will be updated to reflect the facility. Documents reflecting the Sponsor's request are available, by appointment only, for inspection at the Airport Manager's office and the FAA Airport District Office.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A330-200 series airplanes, Model A330-200 Freighter series airplanes, and Model A330-300 series airplanes. This proposed AD was prompted by a determination that certain service information specified in AD 2018-20-19 contained instructions that could be misleading, resulting in a necessary inspection not being accomplished on certain airplanes. This proposed AD would require a rototest for certain modified airplanes for any crack around the right- side upper and lower bulk door support or door latch fitting holes at certain bulk cargo door frames, or repetitive inspections for any crack at certain fittings, and on-condition actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) AD 2021-06-03, which applies to all The Boeing Company Model 777F series airplanes. AD 2021-06-03 requires deactivating the potable water system. Since the FAA issued AD 2021-06-03, Boeing developed new actions to address the unsafe condition, which terminate the action required by AD 2021-06-03. This proposed AD would retain the actions required by AD 2021-06-03 and would require installing a shroud to the water supply line in the forward cargo compartment, and performing a leak test of the potable water system. For certain airplanes, this proposed AD would also require replacing tubes and hoses from the water supply line and installing a shroud to the water return line. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to amend four VHF Omnidirectional Range (VOR) Federal airways and establish a new RNAV T-route in the vicinity of Watertown, South Dakota. This action is necessary due to the planned decommissioning of the VOR portion of the Watertown, SD, VOR/Tactical Air Navigation (VORTAC), which provides navigational guidance to portions of the affected VOR Federal airways. The Watertown VOR is being decommissioned as part of the FAA's VOR Minimum Operational Network (VOR MON) program.

Notice is being given that the FAA is considering a request from the City of Presque Isle to change 19 acres of land from Aeronautical Use to Non-Aeronautical Use for a Solar facility at Presque Isle International Airport, Presque Isle, Presque Isle, ME. A solar facility will be constructed on 19 acres of land at Presque Isle International Airport. The solar facility is being constructed on land not required for aviation use. The land has been designated for non- aeronautical use. The airport will have a land lease with the solar company that will generate a new non-aeronautical revenue source for the airport. The land lease proceeds will be deposited in the airport's operation and maintenance account.

The FAA proposes to adopt a new airworthiness directive (AD) for Bell Textron Canada Limited (type certificate previously held by Bell Helicopter Textron Canada Limited) Model 206L, 206L-1, 206L-3, and 206L-4 helicopters with a certain part-numbered main rotor (M/R) blade installed under Supplemental Type Certificate (STC) SR02684LA. This proposed AD was prompted by delamination of M/R blades. This proposed AD would require a repetitive inspection for delamination, and depending on the results, removing the M/R blade from service and reporting certain information. The FAA is proposing this AD to address the unsafe condition on these products.