Federal Aviation Administration 2019 – Federal Register Recent Federal Regulation Documents

This action updates the using agency information for restricted areas R-5502A and R-5502B; Lacarne, OH, and updates the controlling agency information for R-5502A. Additionally, this action adds exclusion language to the R-5502B boundaries information to overcome potential controlling agency confusion caused when both restricted areas are active in the same volume of airspace. These are administrative changes to reflect the current organizations tasked with using agency and controlling agency responsibilities for the restricted areas. It does not affect the overall R-5502 restricted area complex boundaries, designated altitudes, time of designation, or activities conducted within the restricted areas.

We are adopting a new airworthiness directive (AD) for all Pacific Aerospace Ltd. Model FBA-2C1, FBA-2C2, FBA-2C3, and FBA-2C4 airplanes. This AD was prompted by a report of corrosion found in the external and internal surfaces of an elevator push-pull rod. This AD requires an inspection for corrosion of the elevator push-pull rod assembly, and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by a report of cracks in a certain body station (STA) frame web and doubler at fastener holes common to the stop fitting at a certain stringer. This AD requires repetitive surface high frequency eddy current (HFEC) inspections for cracking of the frame web and doubler at the stop fitting at a certain stringer, and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.

The FAA proposes to revise the procedural rules governing Federal Aviation Administration investigations and enforcement actions. The proposed revisions include updates to statutory and regulatory references, updates to agency organizational structure, elimination of inconsistencies, clarification of ambiguity, increases in efficiency, and improved readability.

This action modifies Class E airspace extending upward from 700 feet above the surface at Lawrenceville-Vincennes International Airport, Lawrenceville, IL, and Mount Carmel Municipal Airport, Mount Carmel, IL. This action is due to the decommissioning of the Lawrenceville VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

This action modifies Class D airspace and Class E airspace extending upward from 700 feet above the surface at Lawrence J. Timmerman Airport, Milwaukee, WI, due to the decommissioning of the Timmerman VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. This action would also replace the outdated term ``Airport/Facility Directory'' with ``Chart Supplement.'' Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

We are superseding Airworthiness Directive (AD) 2018-22-05, which applied to Engine Alliance (EA) GP7270, GP7272, and GP7277 turbofan engines with a certain high-pressure turbine (HPT) case installed. AD 2018-22-05 required removal of affected HPT stator cases (HPT cases) from service and their replacement with a part eligible for installation. This AD retains these requirements, reduces the compliance times for the removal and replacement of certain HPT cases, and identifies additional affected parts that must be removed and replaced. This AD was prompted by the discovery of a quality escape at a manufacturing facility involving unapproved welds on HPT cases. Subsequent additional findings suggested the need for an updated risk analysis, resulting in reduced compliance times for those parts and the identification of additional affected parts. We are issuing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. We are proposing this AD to address the unsafe condition on these products.

We propose to supersede Airworthiness Directive (AD) 2017-11- 09, which applies to certain Learjet, Inc. (Learjet), Model 60 airplanes. AD 2017-11-09 requires a one-time inspection of the fuselage skin for corrosion and, as necessary, additional related inspections and corrective actions. Since we issued AD 2017-11-09, we identified an error in the fluorescent dye penetrant inspection of the fuselage skin and an ambiguity in the compliance time for the fluorescent dye penetrant inspection. We are proposing this AD to clarify the compliance time and correct an error for the fluorescent dye penetrant inspection of the fuselage skin.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are adopting a new airworthiness directive (AD) for certain International Aero Engines (IAE) PW1100G-JM turbofan engine models with certain low-pressure turbine (LPT) 1st- and 3rd-stage disks installed. This AD was prompted by a report of manufacturing defects found on delivered LPT 1st- and 3rd-stage disks. This AD requires removing the LPT 1st- or 3rd-stage disk from service and replacing with a part eligible for installation. We are issuing this AD to address the unsafe condition on these products.

The Federal Aviation Administration (FAA) proposes to rule and invites public comment for the release of approximately 336 acres of airport property at the Lost Hills Airport (Airport) in Lost Hills, California from all conditions contained in the Surplus Property Deed and Grant Assurances because the Airport land is not needed for airport purposes. The land requested to be released is located at the northeast corner of State Route 46 and Lost Hills Road in Lost Hills California. The subject land is adjacent to offsite agricultural uses, sewage treatment ponds and residential and commercial development. On the west side of the Airport there is a small industrial lease area and one water well. Whereas, on the southwest portion of the Airport there is a soccer complex, County public park and fire station. The Airport land will be sold via County public auction at Fair Market Value (FMV) for either its existing use as industrial/public facility or conversion to agricultural use. The County public park and fire station currently located on Airport land will be sold at its FMV for continued uninterrupted use. The proceeds from the sale of airport land will be reinvested into Meadows Field and Kern Valley airports, therefore benefitting general aviation. Unamortized Airport Improvement Program Grant funds in the amount of $426,289 will be reinvested into general aviation grant projects at either Meadows Field Airport or Kern Valley Airport, both located in Kern County, California.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by reports of warpage of internal engine fire handle components, which can cause binding and prevent proper operation. We are issuing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for all Airbus SAS Model A319-113 and -114 airplanes, and Model A320-211 and - 212 airplanes. This proposed AD was prompted by a report that a life- limit of 64,000 flight cycles has been established for certain titanium crossbeams of the forward engine mount. This proposed AD would require repetitive replacements of all affected crossbeams of the forward engine mount. We are proposing this AD to address the unsafe condition on these products.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

The FAA is considering a proposal to change 14.32 acres of airport land from aeronautical use to non-aeronautical use at James M. CoxDayton International Airport, Dayton, OH. The aforementioned land is not needed for aeronautical use. The property is a portion of the land used by a former air cargo facility located on the north side of the James M. CoxDayton International Airport. The land is currently improved with a 38,000 square foot building, associated parking and former aircraft ramp. The property proposed for release was acquired by the City of Dayton under FAA Grant Number: 3-39-0029-03. The City wishes to lease this parcel for non-aeronautical purposes at Fair Market Value. The proposed non- aeronautical land use is consistent with a compatible commercial/ industrial development.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves soliciting feedback from airmen on service quality of Aeromedical Certification Services. The information to be collected will be used to inform improvements in Aeromedical Certification Services.

The Federal Aviation Administration (FAA) announces its determination that the Noise Exposure Maps submitted by City of Atlanta/Department of Aviation for Hartsfield-Jackson International Airport Airport under the provisions of 49 U.S.C. 47501 et seq. (Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements.

We are adopting a new airworthiness directive (AD) for certain Aspen Avionics, Inc. (Aspen), Evolution Flight Display (EFD) EFD1000 Primary Flight Display (PFD), EFD1000 Multi-Function Display (MFD), EFD1000 Emergency Backup Display (EBD), and EFD500 MFD units installed on various aircraft. This AD requires disabling the Automatic Dependent Surveillance-Broadcast (ADS-B) In function and revising the Airplane Flight Manual Supplement (AFMS). This AD was prompted by reports of flight displays repetitively resetting. We are issuing this AD to address the unsafe condition on these products.