Federal Aviation Administration 2019 – Federal Register Recent Federal Regulation Documents

Results 351 - 400 of 1,142
Amendment of the Class E Airspace and Establishment of Class E Airspace; Huntsville, AL
Document Number: 2019-20111
Type: Rule
Date: 2019-09-18
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Class E surface airspace and the Class E airspace extending upward from 700 feet above the surface and establishes a Class E airspace area designated as an extension to a Class C surface area at Huntsville International-Carl T. Jones Field, Huntsville, AL. This action is due to an airspace review caused by the decommissioning of the Decatur VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. The names of Huntsville International-Carl T. Jones Field, Redstone AAF, Pryor Field Regional Airport, and Huntsville Executive Tom Sharp Jr. Field and the geographic coordinates of Huntsville International-Carl T. Jones Field, Pryor Field Regional Airport, and Huntsville Executive Tom Sharp Jr. Field are also being updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Amendment of the Class E Airspace; Haleyville, AL, and Hamilton, AL
Document Number: 2019-20110
Type: Rule
Date: 2019-09-18
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Class E airspace extending upward from 700 feet above the surface at Posey Field Airport, Haleyville, AL, and Marion County-Rankin Fite Airport, Hamilton, AL. This action is due to an airspace review caused by the decommissioning of the Hamilton VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at these airports, as part of the VOR Minimum Operational Network (MON) Program. The name and geographic coordinates of Marion County-Rankin Fite Airport are also being updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at these airports.
Amendment of Class E Airspace; Fairmont, MN
Document Number: 2019-20109
Type: Rule
Date: 2019-09-18
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Class E surface airspace and the Class E airspace extending upward from 700 feet above the surface at Fairmont Municipal Airport, Fairmont, MN. This action is due to an airspace review caused by the decommissioning of the Fairmont VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. The geographic coordinates of the Fairmont Municipal Airport are also being updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Amendment of Class E Airspace; Mattoon/Charleston, IL; and Revocation of Class E Airspace; Monticello, IL
Document Number: 2019-20105
Type: Rule
Date: 2019-09-18
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Class E airspace extending upward from 700 feet above the surface at Coles County Memorial Airport, Mattoon/ Charleston, IL, and removes the Class E airspace extending upward from 700 feet above the surface at Piatt County Airport, Monticello, IL. This action is due to an airspace review caused by the decommissioning of the Mattoon VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at these airports, as part of the VOR Minimum Operational Network (MON) Program; and the closure of the Piatt County Airport. The geographic coordinates of and the city associated with the Coles County Memorial Airport are also being updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at Coles County Memorial Airport.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Helicopter Air Ambulance, Commercial Helicopter, and Part 91 Helicopter Operations
Document Number: 2019-20072
Type: Notice
Date: 2019-09-17
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves the collection of information related to rules governing Helicopter Air Ambulance, Commercial Helicopter, and Part 91 Helicopter Operations. The information to be collected supports the Department of Transportation's strategic goal of safety. Specifically, the goal is to promote the public health and safety by working toward the elimination of transportation-related deaths and injuries.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-19913
Type: Rule
Date: 2019-09-17
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2016-12- 09, which applied to certain Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and Model A340-200 and -300 series airplanes. AD 2016-12-09 requirements included removing existing and installing new fasteners, inspecting for and, if necessary, repairing cracking. This new AD requires repetitive inspections of the fastener holes at a certain frame and applicable on-condition actions, and, for certain airplanes, requires a modification, as specified in European Union Aviation Safety Agency (EASA) ADs, which are incorporated by reference. Also as specified in the EASA ADs, this AD also provide an optional terminating action for certain airplanes, which terminates the inspections. This AD was prompted by reports that cracks were found on an adjacent hole of certain frames of the center wing box (CWB) and a determination that the compliance time specified in AD 2016-12-09 for the modification of the inside CWB must be revised. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2019-19914
Type: Proposed Rule
Date: 2019-09-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede Airworthiness Directive (AD) 2017-19-04 and AD 2014-16-26, which apply to certain Dassault Aviation Model FALCON 900EX airplanes. Those ADs require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and/or airworthiness limitations. Since the FAA issued AD 2017-19-04 and AD 2014-16-26, the FAA determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Fokker Services B.V. Airplanes
Document Number: 2019-19912
Type: Rule
Date: 2019-09-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD was prompted by reports of cracks on certain nose landing gear (NLG) turning tubes resulting from incorrectly applied repairs. This AD requires removing the affected parts and replacing them with serviceable parts. The FAA is issuing this AD to address the unsafe condition on these products.
Proposed Amendment of Class E Airspace; Tomahawk, WI
Document Number: 2019-19884
Type: Proposed Rule
Date: 2019-09-16
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Tomahawk Regional Airport, Tomahawk, WI. The FAA is proposing this action as the result of an airspace review requested by the Airspace Policy Group. The geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2019-19772
Type: Proposed Rule
Date: 2019-09-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede Airworthiness Directive (AD) 2017-19-14 and AD 2014-16-27, which apply to certain Dassault Aviation Model FALCON 900EX airplanes. Those ADs require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and/or airworthiness limitations. Since the FAA issued AD 2017-19-14 and AD 2014-16-27, the FAA determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
IFR Altitudes; Miscellaneous Amendments
Document Number: 2019-19784
Type: Rule
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Petition for Exemption; Summary of Petition Received: Wing Aviation, LLC; Correction
Document Number: 2019-19783
Type: Notice
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
On September 5, 2019, the FAA published a notice in the Federal Register containing a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. 84 FR 46774. This notice corrects the sections of the Code of Federal Regulations from which the petitioner seeks relief.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2019-19771
Type: Rule
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to certain The Boeing Company Model 737-100, 737-200, 737-200C, 737-300, 737-400, and 737-500 series airplanes. As published, a paragraph reference specified in the regulatory text is incorrect. This document corrects that error. In all other respects, the original document remains the same.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-19681
Type: Rule
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2019-06- 09, which applied to certain Airbus SAS Model A350-941 airplanes. AD 2019-06-09 required repetitive tightness checks of the baby bassinet inserts installed on stowages and partitions and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Aviation Safety Agency (EASA) AD, which was incorporated by reference. This new AD continues to require repetitive tightness checks of the baby bassinet inserts installed on stowages and partitions and, depending on findings, accomplishment of applicable corrective actions, and also requires modification of the baby bassinet inserts, which constitutes terminating action for the repetitive tightness checks; as specified in an EASA AD, which is incorporated by reference. This AD was prompted by reports that baby bassinet inserts installed on airplane stowages and partitions were found loose because a self-securing fixation device (Loctite) had not been applied. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2019-19679
Type: Rule
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440); CL-600-2C10 (Regional Jet Series 700, 701 & 702); CL-600-2D15 (Regional Jet Series 705); CL-600-2D24 (Regional Jet Series 900); and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports of incorrect deployment of forward and aft flight attendant oxygen masks. This AD requires repacking the flight attendant and lavatory oxygen box assemblies as applicable, replacing the placards, and re-identifying the assemblies. The FAA is issuing this AD to address the unsafe condition on these products.
Proposed Revocation of Class E Airspace; Marshalltown, IA: Withdrawal
Document Number: 2019-19657
Type: Proposed Rule
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is withdrawing the NPRM published in the Federal Register on August 14, 2019, to amend Class E airspace extending upward from 700 feet above the surface at Marshalltown Municipal Airport, Marshalltown, IA. Upon further consideration, the FAA has determined that an operational requirement for the airspace still exists; therefore, withdrawal of the proposed rule is warranted
Amendment of the Class D Airspace; New Iberia, LA
Document Number: 2019-19656
Type: Rule
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
This action amends Class D airspace at Acadiana Regional Airport, New Iberia, LA. This action is the result of the decommissioning of the ACADI Non-directional radio beacon, (NDB). This action is for the safety and management of standard instrument approach procedures for instrument flight rules (IFR), operations at this airport.
Proposed Amendment and Removal of Air Traffic Service (ATS) Routes; Southeastern United States
Document Number: 2019-19544
Type: Proposed Rule
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend 25 jet routes, remove 7 jet routes, and remove 1 high altitude area navigation (RNAV) route in the southeastern United States. This action is in support of the Northeast Corridor Atlantic Route Project to improve the efficiency of the National Airspace System (NAS) and reduce dependency on ground-based navigational systems.
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
Document Number: 2019-19505
Type: Proposed Rule
Date: 2019-09-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede Airworthiness Directive (AD) 2019-03-19, which applies to all Saab AB, Saab Aeronautics Model SAAB 2000 airplanes. AD 2019-03-19 requires a functional check of certain fuel probes, and replacement with a serviceable part if necessary. Since the FAA issued AD 2019-03-19, the agency has determined the definition of a ``serviceable part'' must be revised. This proposed AD would retain a functional check of certain fuel probes, and replacement with a serviceable part if necessary. The FAA is proposing this AD to address the unsafe condition on these products.
Public Notice for Intent To Release Airport Property
Document Number: 2019-19599
Type: Notice
Date: 2019-09-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to rule and invites public comment on the release of airport property at the Kenai Municipal Airport, Kenai, Alaska.
Proposed Amendment of the Class D and Class E Airspace; Meridian, MS
Document Number: 2019-19543
Type: Proposed Rule
Date: 2019-09-11
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend the Class D airspace at Joe Williams NOLF, Meridian, MS; Key Field, Meridian, MS; and NAS Meridian/ McCain Field, Meridian, MS; the Class E airspace area designated as an extension to Class D airspace at Key Field; and the Class E airspace extending upward from 700 feet above the surface at Key Field, Joe Williams NOLF, and NAS Meridian/McCain Field. The FAA is proposing this action as the result of the decommissioning of the Kewanee VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at these airports, as part of the VOR Minimum Operational Network (MON) Program. The names and geographic coordinates of NAS Meridian/McCain Field and Joe Williams NOLF, and the geographic coordinates of Key Field would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at these airports.
Airworthiness Directives; Leonardo S.p.A. Helicopters
Document Number: 2019-19535
Type: Rule
Date: 2019-09-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.A. (Leonardo) Model AW169 helicopters. This AD requires replacing the seals, filler wedges, and handles of each emergency exit window. This AD was prompted by a report that a high level of pushing force was required to jettison some windows. The actions of this AD are intended to address an unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2019-19504
Type: Proposed Rule
Date: 2019-09-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede Airworthiness Directives (ADs) 2016-01-16, 2017-19-03, and 2018-19-05, which apply to Dassault Aviation Model MYSTERE-FALCON 900 airplanes. Those ADs require revising the maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and/or airworthiness limitations. Since AD 2018-19-05 was issued, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
Document Number: 2019-18704
Type: Rule
Date: 2019-09-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding Airworthiness Directive (AD) 2018-18-12 for Airbus Helicopters (Airbus) Model AS350B, AS350B1, AS350B2, AS350B3, and AS350BA helicopters with a certain part-numbered Pall Aerospace Corporation Inlet Barrier Filter (IBF) element installed. AD 2018-18-12 required revising the Rotorcraft Flight Manual Supplement (RFMS) for your helicopter to prohibit operating a helicopter with an IBF element in wet weather and drying or replacing the IBF element if wet. This AD retains the requirements of AD 2018-18-12 but no longer allows reinstallation of a filter after it has been removed. This AD also expands the applicability, provides an optional terminating action for the RFMS revision for your helicopter, and prohibits installing the affected IBFs on any helicopter. This AD was prompted by further review of the unsafe condition and the determination that additional part- numbered IBF elements are affected by the unsafe condition. The actions of this AD are intended to address an unsafe condition on these products.
Amendment of the Class E Airspace; Ashland, KY
Document Number: 2019-19542
Type: Rule
Date: 2019-09-10
Agency: Federal Aviation Administration, Department of Transportation
This action modifies the Class E airspace extending upward from 700 feet above the surface at Ashland Regional Airport, Ashland, KY. This action is due to an airspace review caused the revision of the instrument procedures at the airport, which require additional airspace. The name of the airport are also being updated to coincide with the FAA's aeronautical database.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-19442
Type: Rule
Date: 2019-09-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200 Freighter, -200, and -300 series airplanes; and certain Airbus SAS Model A340-200, -300, -500, and -600 series airplanes. This AD was prompted by a determination that certain wing slat tracks that were inadvertently indicated as eligible for installation on all Model A330 and A340 series airplanes are unable to sustain the ultimate loads relative to the weight variant of certain airplane configurations. This AD requires identifying affected parts, inspecting for and repairing cracks, and replacing affected parts with serviceable parts, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Establishment of Class D and E Airspace; Wichita, KS
Document Number: 2019-19424
Type: Rule
Date: 2019-09-10
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class D airspace and Class E airspace designated as surface area, at Beech Factory Airport, Wichita, KS. This action is for the safety and management of instrument flight rules (IFR) operations at the airport.
Airworthiness Directives; International Aero Engines AG Turbofan Engines
Document Number: 2019-19412
Type: Rule
Date: 2019-09-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain International Aero Engines AG (IAE) V2500 model turbofan engines. This AD was prompted by an inspection that determined that material anomalies exist in certain low-pressure turbine (LPT) stage 6 disks. This AD requires removal from service of the affected LPT stage 6 disks and their replacement with a part eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pratt & Whitney Turbofan Engines
Document Number: 2019-19410
Type: Proposed Rule
Date: 2019-09-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for all Pratt & Whitney (PW) PW1519G, PW1521G, PW1521GA, PW1524G, PW1525G, PW1521G-3, PW1524G-3, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A model turbofan engines. This proposed AD was prompted by reports of in-flight shutdowns due to oil leaking from the connection between the LP10 oil supply tube and the fuel oil cooler (FOC). This proposed AD would require initial and repetitive gap inspections of the LP10 oil supply tube and the FOC and, if a gap is found, replacement of these parts. This proposed AD further requires removal of these parts at the next engine shop visit. The FAA is proposing an AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH
Document Number: 2019-18707
Type: Rule
Date: 2019-09-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. This AD requires inspecting certain part-numbered actuators for corrosion, and removing them from service as necessary. This AD also requires reporting certain information to Airbus Helicopters. This AD is prompted by a hard landing of a helicopter and discovery of a ruptured and displaced tie bar inside the piston of the longitudinal single-axis actuator of the main rotor actuator (MRA). The actions of this AD are intended to address an unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Mitsubishi MU-2B Series Airplane Special Training, Experience, and Operating Procedures
Document Number: 2019-19371
Type: Notice
Date: 2019-09-09
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 27, 2019. The collection of information is necessary to document participation in, completion of, and compliance with the pilot training program for the MU-2B series airplane.
Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
Document Number: 2019-19297
Type: Proposed Rule
Date: 2019-09-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain 328 Support Services GmbH Model 328-100 airplanes. This proposed AD was prompted by a report of missing rivets on landing flap support arm 2. This proposed AD would require an inspection of the landing flap support arms for missing rivets and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2019-19295
Type: Proposed Rule
Date: 2019-09-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model DHC-8-401 and -402 airplanes. This proposed AD was prompted by a report that certain fuselages were delivered with non-conforming keel tension fittings and stringer end fittings. This proposed AD would require a detailed visual inspection of stringer end fittings and keel fittings for loose or working fasteners, signs of wear, and corrosion, and repair if necessary; and a general visual inspection of the keel tension fitting and stringer end fittings, as applicable and repairs and replacement of the keel and stringer end fittings if necessary. The FAA is proposing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-18981
Type: Rule
Date: 2019-09-09
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-18979
Type: Rule
Date: 2019-09-09
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-18977
Type: Rule
Date: 2019-09-09
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2019-18975
Type: Rule
Date: 2019-09-09
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Aviation Rulemaking Advisory Committee; Meeting
Document Number: 2019-19288
Type: Notice
Date: 2019-09-06
Agency: Federal Aviation Administration, Department of Transportation
This notice announces a meeting of the ARAC.
Establishment of Class E Airspace; Lander, WY
Document Number: 2019-19249
Type: Rule
Date: 2019-09-06
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace extending upward from 700 feet above the surface at Hunt Field, Lander, WY, to accommodate new area navigation (RNAV) procedures at the airport. This action is necessary for the safety and management of instrument flight rules (IFR) operations within the National Airspace System.
Airworthiness Directives; General Electric Company Turbofan Engines
Document Number: 2019-19169
Type: Proposed Rule
Date: 2019-09-06
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for all General Electric Company (GE) CF6-80C2A5F, -80C2B1F, -80C2B2F, -80C2B4F, -80C2B5F, -80C2B6F, -80C2B6FA, -80C2B7F, -80C2B8F, -80C2D1F, -80C2K1F, -80C2L1F, -80E1A2, -80E1A3, -80E1A4, and -80E1A4/B model turbofan engines with a certain hydromechanical unit (HMU) installed. This proposed AD was prompted by a report of fuel coking of the HMU fuel metering valve (FMV) electro-hydraulic servo valves (EHSV) resulting in tailpipe fire. This proposed AD would require removal of the HMU and replacement with a part eligible for installation. The FAA is proposing this AD to address the unsafe condition on these products.
Proposed Revocation of VHF Omnidirectional Range (VOR) Federal Airway V-61 and Amendment of Area Navigation Route T-286 Due to the Decommissioning of the Robinson, KS, VOR
Document Number: 2019-19112
Type: Proposed Rule
Date: 2019-09-06
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to remove VHF Omnidirectional Range (VOR) Federal airway V-61 in its entirety and extend area navigation (RNAV) route T-286 in its place. The FAA is proposing this action due to the planned decommissioning of the Robinson, KS (RBA), VOR portion of the Robinson VOR/Distance Measuring Equipment (VOR/DME) navigation aid (NAVAID). The Robinson VOR is being decommissioned in support of the FAA's VOR Minimum Operational Network (MON) program.
Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters
Document Number: 2019-19104
Type: Proposed Rule
Date: 2019-09-06
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Sikorsky Aircraft Corporation (Sikorsky) Model S-70, S-70A, S-70C, S-70C(M), and S-70C(M1) helicopters. This proposed AD was prompted by four incidents of disbonding between the tail rotor (T/R) blade pitch horn and the torque tube. This proposed AD would require recurring visual and tap inspections of the T/R blade, and depending on the outcome, replacing the T/R blade. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-19099
Type: Rule
Date: 2019-09-06
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A320-214 and -271N airplanes and Model A321- 211 and -231 airplanes. This AD was prompted by a test of a new wall partition for a certain cabin attendant seat model that revealed the backrest was permanently deformed and did not allow the seat pan to return to a full-up position; investigation results identified that a heat treatment had not been applied on certain backframes. This AD requires modifying the affected cabin attendant seats, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2019-19054
Type: Proposed Rule
Date: 2019-09-06
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This proposed AD was prompted by a report of fatigue cracking in the lug root radius of a main landing gear (MLG) aft hanger link lug fitting. This proposed AD would require surface high frequency eddy current (HFEC) inspections of the left and right side MLG aft hanger link lug fitting for cracking, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-19010
Type: Proposed Rule
Date: 2019-09-06
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede Airworthiness Directive (AD) 2014-24-07, which applies to certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; A320-211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2014-24-07 requires repetitive rototest inspections for cracking; corrective actions if necessary; and modification of the torsion box, which terminates the repetitive inspections. Since the FAA issued AD 2014-24-07, the FAA has determined that the compliance times for the repetitive inspections must be revised for certain airplanes. This proposed AD would retain the actions of AD 2014-24-07, with certain revised compliance times, as specified in a European Aviation Safety Agency (EASA) AD, which will be incorporated by reference. This proposed AD would also revise the applicability to include additional airplanes. The FAA is proposing this AD to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received; A-Cam Aerials, LLC
Document Number: 2019-19139
Type: Notice
Date: 2019-09-05
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Helinet Aviation Services, LLC
Document Number: 2019-19138
Type: Notice
Date: 2019-09-05
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Wing Aviation, LLC
Document Number: 2019-19137
Type: Notice
Date: 2019-09-05
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; University of Florida Unmanned Aircraft Systems Research Program
Document Number: 2019-19136
Type: Notice
Date: 2019-09-05
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Helinet Aviation Services, LLC
Document Number: 2019-19128
Type: Notice
Date: 2019-09-05
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.