Federal Aviation Administration June 2011 – Federal Register Recent Federal Regulation Documents

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD would require replacing the rub strips of the tail fuel tank access door with new rub strips. This proposed AD was prompted by a report that the rub strips of the tail fuel tank access door were manufactured improperly. We are proposing this AD to prevent inadequate electrical bonding between the rub strips and the fuel access door, which can contribute to possible ignition of flammable fuel vapor in the tail fuel tank as a result of a lightning strike.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD would require repetitive detailed inspection and high frequency eddy current (HFEC) inspections for cracks of the wing center section (WCS) spanwise beams, and repair if necessary. This proposed AD was prompted by reports of cracks found in the web pockets of the WCS spanwise beams. We are proposing this AD to detect and correct cracking in the WCS spanwise beams, which could result in reduced structural integrity of the wings.

We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The Federal Aviation Administration proposes to rule and invite public comment on the release of land at the Lehigh Valley International Airport, Allentown, Pennsylvania under the provisions of Section 47125(a) of Title 49 United States Code (U.S.C.). The parcel is a generally north/south rectangular property whose south end of the parcel is located at the north end of Lynnwood Dr. The property is currently vacant land, under agricultural production, and is maintained to protect airspace surfaces of 14 CFR 77.19. The requested release is for the purpose of permitting the Airport Owner to convey title of 14.496 Acres as open space dedication to meet the conditions of an existing zone change (Resolution 07-08), and the Subdivision and Land Development Ordinance of Hanover Township in Northampton County, Pennsylvania. This release will enable the airport to implement the Noise Land Reuse Plan approved by the FAA on May 10, 2010. Documents reflecting the Sponsor's request are available, by appointment only, for inspection at the Airport Manager's office and the FAA Harrisburg Airport District Office.

We propose to supersede an existing airworthiness directive (AD) that applies to certain TCM and R-RM series reciprocating engines. The existing AD currently requires replacement of certain magnetos if they fall within the specified serial number (S/N) range, inspection of the removed magneto to verify that the stop pin is still in place, and, if the stop pin is not in place, inspection of the engine gear train, crankcase, and accessory case. Since we issued that AD, we became aware of an error in the previous AD applicability in the range of magneto S/ Ns affected, and of the need to include certain engines made by R-RM, under license of TCM. This proposed AD would correct the range of S/Ns affected, require the same replacement and inspections, and would add R-RM C-125, C-145, O-300, IO-360, TSIO-360, and LTSIO-520-AE series reciprocating engines to the applicability. We are proposing this AD to correct the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for the products listed above. This emergency AD was sent previously to all known U.S. owners and operators of these airplanes. This AD requires that, as of the effective date of the AD, operation of Model FALCON 7X airplanes is prohibited. This AD was prompted by a report of an uncontrolled pitch trim runaway during descent. We are issuing this AD to prevent loss of control of the airplane.

We are adopting a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are superseding an existing airworthiness directive (AD) that applies to the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * The airworthiness limitations applicable to the Certification Maintenance Requirements (CMR) are given in Airbus A330 ALS Part 3, which is approved by the European Aviation Safety Agency (EASA). The revision 03 of Airbus A330 ALS Part 3 introduces more restrictive maintenance requirements and/or airworthiness limitations. Failure to comply with this revision constitutes an unsafe condition. * * * * * The unsafe condition is safety-significant latent failures that would, in combination with one or more other specific failures or events, result in a hazardous or catastrophic failure condition. We are issuing this AD to require actions to correct the unsafe condition on these products.

The FAA published a Notice of Meetings in the Federal Register of June 17, 2011, concerning a proposal to modify Class B airspace at Las Vegas, NV. The document contained an incorrect address for the informal airspace meeting scheduled Tuesday, August 23, 2011, in Henderson, NV. Also, the document contained the wrong phone number for the contact person. The information for the other two meetings is correct as originally published.

This action announces the FAA's recommended guidance for the voluntary marking of Meteorological Evaluation Towers (METs) erected in remote and rural areas that are less than 200 feet above ground level (AGL). This guidance will enhance the conspicuity of the towers for low level agricultural operations in the vicinity of these towers.

The Federal Aviation Administration (FAA) is considering a proposal to authorize the release of 0.101 acres of the airport property at the Shell Lake Municipal Airport, Shell Lake, WI. A recently-completed boundary survey of the airport found that a privately-owned structure encroaches onto land owned by the airport. This finding has resulted in a proposal to transfer the affected parcel of airport land to the neighboring owner in exchange for that owner transferring a parcel of its own land to the airport. Release of the 0.101 acre parcel from land assurances would allow the encroaching structure to remain standing. The parcel to be acquired by the airport in the land exchange (0.021 acres) would give the airport ownership of a key parcel of land located within the 14 CFR part 77-defined, primary surface of Runway 14/32. A categorical exclusion for this land release action was prepared by Wisconsin Dept. of Transportation-Bureau of Aeronautics and issued on February 28, 2011. The aforementioned land is not needed for aeronautical use, as shown on the Airport Layout Plan. There are no impacts to the airport by allowing the airport to dispose of the property. The parcel to be released was originally acquired with local funds in 1961. To compensate for the uneven exchange of land area (0.101 acres to be released by the airport vs. 0.021 acres to be acquired by the airport), the airport will receive $1,000 in additional compensation to be used at the airport for maintenance and/or improvement purposes. In accordance with section 47107(h) of title 49, United States Code, this notice is required to be published in the Federal Register 30 days before modifying the land-use assurance that requires the property to be used for an aeronautical purpose.

These special conditions are issued for the Gulfstream GVI airplane. This airplane will have a novel or unusual design feature associated with an electronic flight control system that provides roll control of the airplane through pilot inputs to the flight computers. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Gulfstream GVI airplane. This airplane will have novel or unusual design features associated with the architecture and connectivity capabilities of the airplane's computer systems and networks, which may allow access by external computer systems and networks. Connectivity by external systems and networks may result in security vulnerabilities to the airplane's systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Gulfstream GVI airplane. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These design features include systems that affect the structural capability of the airplane. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action extends the comment period for an SNPRM that was published on May 20, 2011. In that document, the FAA proposed to amend the regulations for crewmember and aircraft dispatcher training programs in domestic, flag, and supplemental operations. This extension is a result of requests for extension of the comment period. One request for extension was from the Air Transport Association of America, Cargo Airline Association, Air Carrier Association of America, Regional Airline Association, National Air Carrier Association, Boeing Company, and Airbus Americas. The second request for extension was from the Air Line Pilots Association. The third request for extension was from the International Air Transport Association.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD would require replacing or modifying the upper and lower rudder power control modules (PCM). This proposed AD was prompted by a report of a rudder hard-over event on a Model 747-400 series airplane, caused by a rudder PCM manifold cracking and separating in the area of the yaw damper cavity end-cap. We are proposing this AD to prevent a failure of the lower or upper rudder PCM manifold, which could result in a hard-over of the rudder surface leading to an increase in pilot workload and a possible high-speed runway excursion upon landing.

This action amends Class E airspace at Newcastle, WY, to accommodate aircraft using the Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Mondell Field Airport. This improves the safety and management of Instrument Flight Rules (IFR) operations at the airport. The airport name also is being changed to Mondell Field Airport.

This action establishes Class E Airspace at Brunswick, ME, to accommodate the additional airspace needed for the Standard Instrument Approach Procedures developed for Brunswick Executive Airport. This enhances the safety and airspace management of Instrument Flight Rules (IFR) operations at the airport. This action also corrects errors in the legal description published as a proposed rule in the Federal Register on March 18, 2011.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The information to be collected includes data required for performing launch site location analysis. The launch site license is valid for a period of 5 years. Respondents are licensees authorized to operate sites.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The information collected is used by the FAA to register aircraft or hold an aircraft in trust. The information required to register and prove ownership of an aircraft is required by any person wishing to register an aircraft.

This action proposes to amend Class D and Class E airspace at Casper, Natrona County International Airport, Casper, WY, by adjusting the geographic coordinates of the airport. This action also would establish Class E En Route Domestic airspace at the airport, to facilitate vectoring of Instrument Flight Rules (IFR) traffic from en route airspace to Casper, WY. The FAA is proposing this action to enhance the safety and management of aircraft operations at Casper, Natrona County International Airport.