Federal Aviation Administration February 2008 – Federal Register Recent Federal Regulation Documents

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This Notice sets forth the conditions under which a foreign air carrier may make an arrangement with a U.S. air carrier for a flight or series of flights, to be conducted with the foreign air carrier's aircraft and crew, for that U.S. certificated air carrier's- authorized services in foreign air transportation. This Notice also describes the regulatory steps involved for seeking Department approval for such an operation.

This action confirms the effective date of a direct final rule that establishes a Class E airspace area to support Area Navigation (RNAV) Global Positioning System (GPS) Special Instrument Approach Procedures (IAPs) that serve the Northwest Medical Center in Oil City, PA.

The FAA proposes to amend requirements concerning the registration of aircraft. This proposal is based on the need to increase and maintain the accuracy of aircraft registration information in the Civil Aviation Registry. The proposed procedures would ensure aircraft owners periodically provide information regarding changes in registration. These amendments would respond to the concerns of law enforcement and other government agencies and would provide more accurate, up-to-date aircraft registration information to all users of the Civil Aviation Registry database.

The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF34-8C1/-8C5/-8C5B1/-8E5/-8E5A1, and CF34-10E series turbofan engines with certain part number (P/N) and serial number (SN) fuel metering units (FMU) installed. This AD requires a onetime test of the FMU for a miswired (reversed polarity) condition of the input wires to the overspeed solenoid. This AD results from the discovery of miswired FMU overspeed solenoids in the field. We are issuing this AD to prevent the engine from failing to shutdown during an overspeed which may lead to uncontained engine failure.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 767-200, -300, and -300F series airplanes. That AD currently requires reworking the surface of the ground stud bracket of the left and right transformer rectifier units (TRUs) and the airplane structure mounting surface, and measuring the resistance from the bracket to the structure and the ground lugs to the bracket using a bonding meter. This new AD revises the applicability of the existing AD to include additional airplanes and requires, among other actions, installation of a new ground stud bracket using faying surface bonding. This AD results from a report of loss of all direct current (DC) power generation during a flight, due to inadequate electrical ground path between the ground bracket of the TRUs/main battery charger (MBC) and the structure. We are issuing this AD to prevent depletion of the main battery while in flight, resulting from the loss of both TRUs and the MBC, and consequent loss of all DC power, which could impact the safe flight and landing of the airplane due to the loss of function or malfunction of essential/critical systems and displays in the cockpit.

Under the provisions of Title 49, U.S.C. Section 47153(c), notice is being given that the FAA is considering a request from the CartersvilleBartow County Airport Authority to waive the requirement that 1.095 acres in fee simple of federal property, located at the Cartersville Airport, be used for aeronautical purposes.

The FAA is issuing this notice to advise the public of a meeting of the Executive Committee of the Aviation Rulemaking Advisory Committee.

This action amends certain regulations governing U.S. registered aircraft operating beyond the territorial airspace of the United States. This action is necessary to correct an error in the recodification of the regulations concerning general operating and flight rules. The intended effect of this action is to correct an inadvertent error in the regulations.

The FAA is superseding an existing airworthiness directive (AD), which applies to all Dassault Model Falcon 2000, Mystere-Falcon 900, Falcon 900EX, Fan Jet Falcon, Mystere-Falcon 50, Mystere-Falcon 20, Mystere-Falcon 200, and Falcon 10 series airplanes. That AD currently requires repetitive tests and inspections to detect discrepancies of the overwing emergency exit, and corrective action if necessary. This new AD expands the applicability of the existing AD and extends the repetitive test and inspection intervals for all airplanes. This AD results from reports of incorrect operation of the overwing emergency exit due to interference between the emergency exit and the interior accommodation. We are issuing this AD to prevent failure of the overwing emergency exits to open, and consequent injury to passengers or crewmembers during an emergency evacuation.

The FAA invites public comments about or intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 6, 2007, vol. 72, no. 234, page 68948. This project involves collecting data from recently certified ASEL pilots on the quality of their flight training and practical test experiences.

The FAA proposes to adopt a new airworthiness directive (AD) for General Electric Company (GE) CF6-80C2 and CF6-80E1 series turbofan engines. This proposed AD would require replacement of all clevis pins installed on the thrust reverser central drive units and upper and lower actuators, or replacement of pins that fail an on-wing rebound hardness test. This proposed AD results from failure of a thrust reverser during landing due to unapproved clevis pins being installed. The failure was due to lack of clevis pin hardness. We are proposing this AD to prevent thrust reverser failure, which could lead to damage to the thrust reverser and airplane.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This Rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 707 airplanes, and Model 720 and 720B series airplanes. This AD requires revising the FAA-approved maintenance program by incorporating new airworthiness limitations (AWLs) for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. This AD also requires the initial performance of certain repetitive AWL inspections to phase in those inspections, and repair if necessary. This AD results from a design review of the fuel tank systems. We are issuing this AD to prevent the potential for ignition sources inside fuel tanks caused by latent failures, alterations, repairs, or maintenance actions, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.

We are adopting a new airworthiness directive (AD) to supersede AD 2007-16-14, which applies to all Taylorcraft (Taylorcraft) A, B, and F series airplanes. AD 2007-16-14 currently requires you to do an initial visual inspection of the left and right wing front and aft lift struts for cracks and corrosion and replace any cracked strut or strut with corrosion that exceeds certain limits. If the strut is replaced with an original design vented strut, AD 2007-16-14 requires you to repetitively inspect those struts thereafter. Since we issued AD 2007-16-14, we determined that the eddy current inspection method does not address the unsafe condition for the long term. We also determined that Models FA-III and TG-6 airplanes are not equipped with the affected struts. Consequently, this AD retains the actions required in AD 2007-16-14, except it removes the eddy current inspection method (provides 24-month credit if already done using this method), adds the radiograph method as an inspection method, changes the Applicability section, and changes the compliance time between the repetitive inspections. We are issuing this AD to detect and correct cracks and corrosion in the left and right wing front and aft lift struts. This condition, if not corrected, could result in failure of the lift strut and lead to in-flight separation of the wing.

We are adopting a new airworthiness directive (AD) for all Boeing Model 727 airplanes. This AD requires revising the FAA-approved maintenance program by incorporating new airworthiness limitations (AWLs) for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. This AD also requires the initial inspection of a certain repetitive AWL inspection to phase in that inspection, and repair if necessary. This AD results from a design review of the fuel tank systems. We are issuing this AD to prevent the potential for ignition sources inside fuel tanks caused by latent failures, alterations, repairs, or maintenance actions, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.

We are adopting a new airworthiness directive (AD) for all Boeing Model 707 airplanes and Model 720 and 720B series airplanes. This AD requires repetitive inspections for any cracking of or damage to the left side and right side flight deck No. 2, No. 4, and No. 5 windows, as necessary, and corrective actions if necessary. This AD results from reports of in-flight departure and separation of the flight deck windows. We are issuing this AD to detect and correct cracking in the vinyl interlayer or damage to the structural inner glass panes of the flight deck No. 2, No. 4, and No. 5 windows, which could result in loss of a window and rapid loss of cabin pressure. Loss of cabin pressure could cause crew communication difficulties or crew incapacitation.

This notice proposes to change aircraft engine fire protection certification standards to upgrade and harmonize them with European Aviation Safety Agency (EASA) requirements. The proposed changes, if adopted, would provide nearly uniform fire protection certification standards for engines certificated in the United States under 14 CFR part 33 and in European countries under EASA Certification Specifications for Engines (CS-E), and would simplify international type certification.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: