Department of Transportation 2019 – Federal Register Recent Federal Regulation Documents

The Federal Aviation Administration (FAA) and the National Park Service (NPS), in accordance with the National Parks Air Tour Management Act of 2000, announce the next meeting of the National Parks Overflights Advisory Group (NPOAG). This notification provides the date, location, and agenda for the meeting.

This action proposes to Establish Class E airspace extending upward from 700 feet above the surface at Chase Field Industrial Airport, Beeville-Chase Field, TX. Controlled airspace is necessary to accommodate new standard instrument approach procedures developed at Chase Field Industrial Airport, for the safety and management of instrument flight rules (IFR) operations.

We are adopting a new airworthiness directive (AD) for certain Pratt & Whitney Division (PW) PW4158 turbofan engines. This AD was prompted by several reports of high cycle fatigue (HCF) cracks found in the fuel nozzle supply manifold. This AD requires replacement of the affected fuel nozzles and fuel nozzle manifold supply assemblies with parts eligible for installation. This AD also requires installation of new brackets and clamps on the fuel nozzle supply manifold assemblies. We are issuing this AD to address the unsafe condition on these products.

By Federal Register notice on February 19, 2019 the National Park Service (NPS) and the Federal Aviation Administration (FAA) invited interested persons to apply to fill two current openings on the National Parks Overflights Advisory Group (NPOAG) to represent general aviation, and Native American interests. This notice informs the public of the selection made for the vacancy representing general aviation and invites persons interested in serving on the NPOAG to apply for the still current opening representing Native American concerns.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model DHC-8-102, -103, and -106 airplanes; DHC-8-200 series airplanes; and DHC-8-300 series airplanes. This proposed AD was prompted by the reported loss of an elevator spring tab balance weight prior to takeoff. This proposed AD would require inspecting the two balance weights and the two hinge arms on each elevator spring tab, and corrective actions if necessary. We are proposing this AD to address the unsafe condition on these products.

Jaguar Land Rover North America, LLC (JLR), on behalf of Jaguar Land Rover Limited, has determined that certain model year (MY) 2012-2018 Jaguar motor vehicles do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 135, Light Vehicle Brake Systems. JLR filed a noncompliance report dated June 22, 2017. JLR also petitioned NHTSA on July 20, 2017, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. For the reasons stated below, NHTSA grants the petition.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The FAA assesses the information collected and issues operations specifications to foreign air carriers. These operations specifications assure the foreign air carrier's ability to navigate and communicate safely within the U.S. National Airspace System.

We are adopting a new airworthiness directive (AD) for HPH s. r.o. Models Glasf[uuml]gel 304C, Glasf[uuml]gel 304CZ, and Glasf[uuml]gel 304CZ-17 gliders. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as jamming between the double two-ring end of the towing cable and the deflector angles of the center of gravity (C.G.) release mechanism. We are issuing this AD to require actions to address the unsafe condition on these products.

This notice announces the availability of and requests comments on the proposed design criteria for the Alexander Schleicher GmbH & Co. Segelflugzeugbau Model ASK 21 B glider. The administrator finds the proposed design criteria for the Model ASK 21 B acceptable.These final design criteria will be published in the Federal Register.

In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the extension of a currently approved information collection: Transit Research, Development, Demonstration and Training Projects.

FMCSA announces its decision to renew exemptions for 52 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these individuals to continue to operate CMVs in interstate commerce without meeting the vision requirement in one eye.

FMCSA announces its decision to renew exemptions for 71 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these individuals to continue to operate CMVs in interstate commerce without meeting the vision requirement in one eye.

We are revising an earlier proposal for certain Gulfstream Aerospace Corporation (Gulfstream) Model G-IV and Model GIV-X airplanes. This action revises the notice of proposed rulemaking (NPRM) by proposing to require a later revision of the service information to update the life limits and inspection requirements in the airworthiness limitations section (ALS) of the aircraft maintenance manual (AMM). We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over those in the NPRM, we are reopening the comment period to allow the public the chance to comment on these changes.

We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada Limited (BHTC) Model 429 helicopters. This AD requires inspecting each main rotor pitch link rod end bearing assembly (bearing) for wear and play. This AD was prompted by reports of worn bearings. The actions of this AD are intended to prevent an unsafe condition on these products.

FMCSA announces receipt of applications from nine individuals for an exemption from the prohibition in the Federal Motor Carrier Safety Regulations (FMCSRs) against persons with a clinical diagnosis of epilepsy or any other condition that is likely to cause a loss of consciousness or any loss of ability to control a commercial motor vehicle (CMV) to drive in interstate commerce. If granted, the exemptions would enable these individuals who have had one or more seizures and are taking anti-seizure medication to operate CMVs in interstate commerce.

FMCSA announces its decision to exempt three individuals from the requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) that interstate commercial motor vehicle (CMV) drivers have ``no established medical history or clinical diagnosis of epilepsy or any other condition which is likely to cause loss of consciousness or any loss of ability to control a CMV.'' The exemptions enable these individuals who have had one or more seizures and are taking anti- seizure medication to operate CMVs in interstate commerce.

This action establishes the FAA's policy for issuing air traffic control (ATC) authorizations to persons seeking to operate aircraft that are not equipped with Automatic Dependent Surveillance- Broadcast (ADS-B) Out equipment in ADS-B airspace after January 1, 2020.

We propose to supersede Airworthiness Directive (AD) 2005-20- 01, which applies to all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. AD 2005-20-01 requires repetitive inspections of the vertical stiffeners at left buttock line (LBL) and right buttock line (RBL) 6.15 for cracks; and replacement of both stiffeners with new, improved stiffeners if any stiffener is found cracked. Since we issued AD 2005-20-01, we have received reports of cracks found in the left and right side keel beam upper chords when replacing vertical stiffeners. In addition, we have determined that the replacement stiffener installation degraded the fault current bonding path and could introduce an ignition source in the fuel tank in the event of an electrical hot short or a lightning strike. This proposed AD would require, depending on airplane configuration, replacing the vertical stiffeners at LBL and RBL 6.15 on the rear spar of the wing center section, installing angle and bonding jumpers, installing brackets, applying sealant, and applying paint. We are proposing this AD to address the unsafe condition on these products.

The U.S. Secretary of Transportation is publishing this notice to solicit nominations for membership on the Safety Oversight and Certification Advisory Committee (SOCAC).

FMCSA announces that it has received an application from the National Waste & Recycling Association (NWRA) requesting an exemption from one of the criteria for using the ``short-haul100 air-mile radius driver'' exception to the requirement for the preparation and retention of records of duty status (RODS). NWRA asks that all short- haul commercial motor vehicle (CMV) drivers in the waste and recycling industry be allowed up to 14 hours (instead of the current 12 hours) to return to the original work reporting location without losing their short-haul status. FMCSA requests public comment on NWRA's application for exemption.

The Federal Transit Administration (FTA) is soliciting proposals under the Department of Transportation's Technical Assistance and Workforce Development Program to select an eligible project or projects for the development and dissemination of technical assistance materials supporting public safety awareness campaigns. The technical assistance materials will address public safety issues impacting the transit industry, including but not limited to human trafficking, operator assault, and crime prevention. Technical assistance also may include recommended practices, and public and employee training. The awarded projects will be referred to as the Crime Prevention and Public Safety Awareness projects, and the available funding is $2,000,000 in Fiscal Year (FY) 2018 funds.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. This information will be used to establish a scientific basis for air tour management policy decisions in the National Parks as mandated by the National Parks Air Tour Management Act of 2000.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL- 600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports of a fractured main landing gear (MLG) orifice support tube (OST). This AD requires replacing the MLG OST, and revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, the Department of Transportation's (DOT) Office of the Secretary (OST) announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. Executive Order 12862 directs Federal agencies to provide service to the public that matches or exceeds the best service available in the private sector. In order to work continuously to ensure that our programs are effective and meet our customers' needs, the Department of Transportation (DOT) seeks a revision to a fast track generic clearance information collection request already approved by OMB. OST requests revision of ICR with OMB Control Number: 2105-0573 as described below.