Department of Transportation September 2018 – Federal Register Recent Federal Regulation Documents

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-500-1A10 and BD-500-1A11 airplanes. This proposed AD was prompted by reports of dislodged cargo compartment blow-out panels. This proposed AD would require repetitive inspections for any dislodged blow-out panel in the forward and aft cargo compartments, reporting of the inspection findings, and re-installation if necessary. We are proposing this AD to address the unsafe condition on these products.

This action extends the Order Limiting Operations at New York LaGuardia Airport (LGA) published on December 27, 2006, as most recently extended May 25, 2016. The Order remains effective until October 24, 2020.

The Pipeline and Hazardous Materials Safety Administration is issuing an emergency waiver order to persons conducting operations under the direction of Environmental Protection Agency (EPA) Regions 3 or 4 or United States Coast Guard (USCG) Fifth or Seventh Districts within the Hurricane Florence emergency areas of South Carolina, North Carolina, and Virginia. The Waiver is granted to support the EPA and USCG in taking appropriate actions to prepare for, respond to, and recover from a threat to public health, welfare, or the environment caused by actual or potential oil and hazardous materials incidents resulting from Hurricane Florence. This Waiver Order is effective immediately and shall remain in effect for 30 days from the date of issuance.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This proposed AD was prompted by reports of drainage holes on the belly fairing forward and middle access panels being obstructed with sealant. This proposed AD would require inspecting for and removing all sealant blocking the drainage holes on the belly fairing forward and middle access panels. We are proposing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 and A310 series airplanes; and Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a determination that new or more restrictive maintenance requirements and airworthiness limitations are necessary. This AD requires revising the maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes), and Model A310 series airplanes. This AD was prompted by a determination that new or more restrictive maintenance requirements and airworthiness limitations are necessary. This AD requires revising the maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Learjet, Inc. Models 28, 29, 31, 31A, 35, 35A, 36, 36A, 55, 55B, 55C, and 60 airplanes. This AD was prompted by fatigue cracks initiating in the flap support structure due to repetitive flap loads, which has caused flap nose roller support bracket failure. This AD requires replacement of the flap nose roller fitting, nose roller support bracket, and adjacent rib support structure with improved components. We are issuing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval. The FMCSA requests to renew the ICR titled, ``Application for Certificate of Registration for Foreign Motor Carriers and Foreign Motor Private Carriers,'' that requires foreign (Mexico-based) for-hire and private motor carriers to file an application Form OP-2 if they wish to register to transport property only within municipalities in the United States on the U.S.-Mexico international borders or within the commercial zones of such municipalities. FMCSA invites public comment on the ICR. There were no comments received to the 60-day Federal Register notice dated April 9, 2018.

On August 29, 2018, FRA published a final rule to reduce the paperwork burden associated with compliance with Federal hours of service laws and regulations. In preparing that final rule for publication, a technical error was made as described in the Supplementary Information. FRA is correcting this minor error so that the final rule clearly conforms to FRA's intent.

The FAA is issuing this notice to advise the public that the FAA has prepared and approved (August 31, 2018) a FONSI/ROD based on the Final EA for a Runway 14/32 Relocation/Extension and Associated Improvements Project at the Lake Elmo Airport. The Final EA was prepared in accordance with the National Environmental Policy Act (NEPA) of 1969, as amended, FAA Orders 1050.1F, ``Environmental Impacts: Policies and Procedures'' and 5050.4B, ``NEPA Implementing Instructions for Airport Actions''.

This action extends the Order Limiting Operations at John F. Kennedy International Airport (JFK) published on January 18, 2008, and most recently amended on June 21, 2016. The Order remains effective until October 24, 2020.

The Moving Ahead for Progress in the 21st Century Act (MAP-21) established the Surface Transportation Project Delivery Program that allows a State to assume FHWA's environmental responsibilities for environmental review, consultation, and compliance under the National Environmental Policy Act (NEPA) for Federal highway projects. When a State assumes these Federal responsibilities, the State becomes solely responsible and liable for the responsibilities it has assumed, in lieu of FHWA. This program mandates annual audits during each of the first 4 years to ensure the State's compliance with program requirements. This notice finalizes the findings of the first audit report for the Utah Department of Transportation (UDOT).

This action corrects a final rule published in the Federal Register of August 1, 2018, that amends Class E airspace at Lyons-Rice County Municipal Airport, Lyons, KS. The word ``County'' was inadvertently omitted from the airport name in the Summary, History, and Rules section of the document, as well as in the header of the legal description.

We propose to adopt a new airworthiness directive (AD) for GA 8 Airvan (Pty) Ltd Models GA8 and GA8-TC320 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as certain wing strut fittings manufactured with incorrect grain orientation, which has an unknown effect on fatigue related concerns. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This proposed AD was prompted by an incident of uncommanded nose wheel steering (NWS) in- service; subsequent investigation revealed that the steering selector valve (SSV) is susceptible to jamming in the open position due to particulate contamination of the hydraulic system. This proposed AD would require modifying the left-hand hydraulic system of the NWS control system and, for certain airplanes, torqueing the fittings on a certain tube assembly. We are proposing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Airbus Defense and Space S.A. Model C-212-CB, C-212-CC, C-212-CD, C- 212-CE, and C-212-DF airplanes. This AD was prompted by reports of failures of the rudder pedal control system support. This AD requires repetitive detailed visual inspections of the rudder pedal control system support box and shaft and applicable corrective actions. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N1, and SA-366G1 helicopters. This AD requires repetitive inspections of the aft fuselage outer skin. This AD was prompted by several reports of aft fuselage outer skin disbonding. The actions of this AD are intended to address an unsafe condition on these products.

Due to the anticipated severe weather from Hurricane Florence, which is forecast to make landfall along the East Coast of the United States later this week, NHTSA is rescheduling the NCAP public meeting to October 1, 2018. The public meeting was originally scheduled on September 14, 2018. Furthermore, due to the new schedule of the public meeting, NHTSA is extending the comment period on the notice of public meeting and request for comments to October 31, 2018. The comment period for the notice of public meeting was originally scheduled to end on October 2, 2018.

This action corrects a final rule published in the Federal Register on August 23, 2018, amending Class D airspace and Class E airspace extending upward from 700 feet or more above the surface at New Smyrna Beach Municipal Airport, New Smyrna Beach, FL. The longitude coordinate symbols for Massey Ranch Airpark listed in Class E airspace areas extending upward from 700 feet were typed as degrees, minutes, minutes instead of degrees, minutes, and seconds. Also, a parenthesis was excluded from the airport's geographic coordinates.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

We propose to supersede Airworthiness Directive (AD) 2017-20- 01, which applies to certain Honeywell International Inc. (Honeywell) TFE731-20 and TFE731-40 turbofan engines. AD 2017-20-01 requires removing the affected fan disk and replacing it with a fan disk eligible for installation. Since we issued AD 2017-20-01, we determined that some turbofan engine models were omitted from the applicability of AD 2017-20-01. This proposed AD would add these turbofan engine models to the applicability, remove the Honeywell TFE731-20 turbofan engine from the applicability, and prohibit installation of affected fan disks. We are proposing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This proposed AD was prompted by a determination that certain holes for the vertical tail plane (VTP) tension bolts connection are not properly protected against corrosion. This proposed AD would require modifying the VTP tension bolts connection by adding sealant and protective treatment to the head of the connection, at the barrel nut cavities, and in the surrounding area. We are proposing this AD to address the unsafe condition on these products.

The Federal Transit Administration (FTA) announces with this notice the Access & Mobility Partnership Grants, which are two opportunities to apply for funding under two competitive grant programs. First, FTA makes available $3,903,715 in funding for the Innovative Coordinated Access and Mobility Pilot Program (ICAM Pilot Program; Catalog of Federal Domestic Assistance (CFDA) number: 20.513). As required by Federal transit law, funds will be awarded competitively to finance innovative capital projects for the transportation disadvantaged that will improve the coordination of transportation services and non-emergency medical transportation services. Second, FTA makes available $2,434,767 in funding for a Human Services Coordination Research (HSCR) Program with funds available under the Public Transportation Innovation Program (Catalog of Federal Domestic Assistance (CFDA) number: 20.514). Research activities awarded under this competitive program will support the implementation of innovative strategies in the coordination of human services transportation to provide more effective and efficient public transportation services to seniors, individuals with disabilities, and low-income individuals. Proposed research projects should address gaps identified in the locally developed Coordinated Public Transit-Human Services Transportation Plan. The HSCR funds will finance operating and capital project expenditures to develop and deploy projects that improve transportation services for targeted populations as noted above through methods that effectively and efficiently coordinate human services transportation. The Access and Mobility Partnership Grants are two separate and distinct funding opportunities that seek to improve access to public transportation through building partnerships among health, transportation, and other service providers.