Department of Transportation March 2018 – Federal Register Recent Federal Regulation Documents

This action proposes to amend Class E surface area airspace, and Class E airspace extending upward from 700 feet or more above the surface at Altoona-Blair County Airport, Altoona, PA. This action would accommodate airspace reconfiguration due to the decommissioning of Altoona VHF omnidirectional range navigation system (VOR) and cancellation of the VOR approaches. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

This actions amends controlled airspace at Lewiston-Nez Perce County Airport, Lewiston, ID, by enlarging Class D airspace, and Class E surface airspace, and reducing Class E airspace designated as an extension, and Class E airspace extending upward from 700 feet above the surface. Also, this action removes the part-time Notice to Airmen (NOTAM) status from Class E airspace designated as an extension. Additionally, an editorial change is made to the legal descriptions replacing ``Airport/Facility Directory'' with the term ``Chart Supplement''. This action enhances safety and management of instrument flight rules (IFR) operations at the airport.

This action amends Class E surface airspace and Class E airspace extending upward from 700 feet above the surface at Massena, NY, as the Massena collocated VHF omnidirectional range tactical air navigation system (VORTAC) has been decommissioned, requiring airspace reconfiguration at Massena International-Richards Field Airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also updates the geographic coordinates of this airport.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (CL-604 Variant) airplanes. This AD was prompted by reports of in-flight uncommanded rudder movements on airplanes with an installation similar to the installation on certain Model CL-600-2B16 (CL-604 Variant) airplanes. This AD requires modification of the wiring harness for the yaw damper control system. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 757-200 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the side panel-to-frame attachments and frames of the aft cargo compartment are subject to widespread fatigue damage (WFD). This AD requires an inspection of the side panel-to-frame attachments and frames to verify that certain modifications have been done, and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.

Toyota Motor Engineering & Manufacturing North America, Inc., on behalf of Toyota Motor Corporation and certain other specified Toyota manufacturing entities (collectively referred to as ``Toyota''), has determined that certain model year (MY) 2016-2017 Lexus RX350 and Lexus RX450H motor vehicles do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 202a, Head Restraints. Toyota filed a noncompliance information report dated November 29, 2016. Toyota also petitioned NHTSA on December 21, 2016, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety.

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1 Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

This action updates the controlling agency information for restricted areas R-2907C, R-2910B, R-2910C, and R-2910E; Pinecastle, FL. This is an administrative change to reflect the current organizations tasked with controlling agency responsibilities for the restricted areas. It does not affect the boundaries, designated altitudes, time of designation or activities conducted within the restricted areas.

We propose to adopt a new airworthiness directive (AD) for Viking Air Limited Model DHC-3 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as pitting corrosion on the shank of the wing strut attach bolts. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

FMCSA announces that the Truck Renting and Leasing Association Inc. (TRALA) has requested an exemption until December 31, 2018, from the electronic logging device (ELD) requirements for all drivers of property-carrying commercial motor vehicles rented for 30 days or fewer. A waiver for the same purpose and group of drivers was issued to TRALA on January 19, 2018, and expires on April 19, 2018. TRALA states that the waiver period, which is limited to 90 days, is not sufficient to address the ELD problems that they and their short-term lessors are encountering. This request, if granted, would provide rental-vehicle owners, carriers, and drivers with additional time to develop compliance strategies for dealing with the unique issues relating to the use of ELDs in short-term rental vehicles. TRALA believes that the exemption, if granted, would not have any adverse impacts on operational safety, as drivers would continue to remain subject to the hours-of-service regulations as well as the requirements to maintain a paper record of duty status. FMCSA requests public comment on TRALA's application for exemption.

The FAA is considering a proposal to change approximately 78.902 acres of airport land from aeronautical use to non-aeronautical use of airport property located at Ft. Wayne International, Ft. Wayne, IN. The aforementioned land is not needed for aeronautical use. Fort Wayne International Airport (FWA) proposes to release approximately 78.902 acres of land located on the northeast corner of existing airport property. The land is located to the east of Keller Road and the west of Ardmore Avenue. The land to be released is comprised of Tract 7, Tract 8, and Tract 9 as described in the survey. The land is owned by the Fort Wayne-Allen County Airport Authority (FWACAA). The property was originally purchased for the purpose of economic development and to enable the Authority to ensure airport compatible development. The Sponsor is proposing to release and ultimately sell or lease these parcels per local zoning regulations. The proposed future use of the land will be for compatible commercial or industrial developments. The sale of these parcels would allow the Sponsor to further financially support airfield improvement projects. Of the tracts proposed for release, none were acquired with FAA Funding.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval of a new information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 15, 2017.

The FAA is correcting a final rule published on December 13, 2016. In that rule, the FAA amended its regulations to allow operators to use an enhanced flight vision system (EFVS) in lieu of natural vision to continue descending from 100 feet above the touchdown zone elevation (TDZE) to the runway and to land on certain straight-in instrument approach procedures (IAPs) under instrument flight rules (IFR). As part of the final rule, the FAA inadvertently removed some regulatory text. This document corrects that error. Additionally, this document corrects the same error in an amendatory instruction of the EFVS final rule to ensure the correction to the regulation is retained when the regulation is subsequently amended on March 13, 2018.

We are adopting a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model AW189 helicopters. This AD requires inspecting and altering the emergency flotation system (EFS). This AD is prompted by a report of punctured EFS kits. The actions of this AD are intended to prevent an unsafe condition on these helicopters.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

FHWA, on behalf of the Utah Department of Transportation (UDOT), is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for proposed transportation improvements in and near Little Cottonwood Canyon in Salt Lake County, Utah.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) abstracted below will be submitted to the Office of Management and Budget (OMB) for review. The ICR describes the nature of the information collection and its expected burden. A Federal Register Notice with a 60-day comment period soliciting public comments on the following information collection was published on July 27, 2017.

In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on November 2, 2017. Two comments were received. The content of neither comment related to the proposed data collection.

We propose to supersede Airworthiness Directive (AD) 2016-24- 03, which applies to certain Bombardier, Inc., Model DHC-8-400 series airplanes. AD 2016-24-03 requires repetitive detailed inspections of barrel nuts and cradles, a check of the bolt torque of the preload indicating (PLI) washers, and corrective actions if necessary. Since we issued AD 2016-24-03, the manufacturer has developed a modification that, when incorporated, terminates the repetitive inspections. This proposed AD would require modifying the airplane by installing a sealing disk to a certain location and replacing certain barrel nuts. We are proposing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters. This AD requires inspecting the tail rotor (T/R) flapping hinge link (hinge) and reporting the results. This AD is prompted by a report of a damaged flapping hinge link. The actions of this AD are intended to prevent an unsafe condition on these products.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.