Department of Transportation May 2016 – Federal Register Recent Federal Regulation Documents

This notice contains a summary of a petition seeking relief from specified requirements of title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This final rule replaces the existing process by which the Federal Aviation Administration (Agency or FAA) approves portable oxygen concentrators (POC) for use on board aircraft in air carrier operations, commercial operations, and certain other operations using large aircraft. The FAA currently assesses each POC make and model on a case-by-case basis and if the FAA determines that a particular POC is safe for use on board an aircraft, the FAA conducts rulemaking to identify the specific POC model in an FAA regulation. This final rule replaces the current process and allows passengers to use a POC on board an aircraft if the POC satisfies certain acceptance criteria and bears a label indicating conformance with the acceptance criteria. The labeling requirement only affects POCs intended for use on board aircraft that were not previously approved for use on aircraft by the FAA. Additionally, this rulemaking will eliminate redundant operational requirements and paperwork requirements related to the physician's statement. As a result, this rulemaking will reduce burdens for POC manufacturers, passengers who use POCs while traveling, and affected aircraft operators. This final rule also makes conforming amendments to the Department of Transportation's (Department or DOT) rule implementing the Air Carrier Access Act (ACAA) to require carriers to accept all POC models that meet FAA acceptance criteria as detailed in this rule.

The FAA is issuing this notice to advise the public of the Forty-Fourth RTCA Special Committee 206 meeting.

The FAA is issuing this notice to advise the public of the Ninth RTCA Special Committee 230 meeting.

We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model MYSTERE-FALCON 900 airplanes, FALCON 900EX airplanes, and FALCON 2000EX airplanes. This AD was prompted by a report that during a test flight, it was found that the yaw damper on the takeoff roll can increase the Minimum Control Speed on Ground (Vmcg). This AD requires revising the airplane flight manual (AFM) to incorporate procedures for the flightcrew to check that the yaw damper is set to ``off'' before takeoff. We are issuing this AD to ensure that the flightcrew has procedures to set the yaw damper to ``off'' before takeoff, which, if activated, could result in reduced control of the airplane if one engine were to fail during takeoff.

This document corrects the Supplemental Notice of Proposed Rulemaking (SNPR) served on April 29, 2016, and published in the Federal Register on May 5, 2016, (81 FR 27069), titled ``United States Rail Service IssuesPerformance Data Reporting.''

The FAA is extending the comment period on its notice of proposed policy published on May 3, 2016, that proposes to amend its ``Notice of Policy Regarding the Eligibility of Airport Ground Transportation Projects for Funding Under the Passenger Facility Charge (PFC) Program,'' regarding the requirement for PFC funding of on- airport, rail access projects.

This action corrects final rule published in the Federal Register of March 29, 2016, amending Class E Airspace designated as an extension at McKellar-Sipes Regional Airport, Jackson, TN, and Tri- Cities Regional Airport, Tri-Cities, TN. This action corrects the geographic coordinates for McKellar-Sipes Regional Airport. Also, the geographic coordinates for McKellar-Sipes Regional Airport in Class D airspace, Class E surface airspace, and Class E airspace extending upward from 700 feet above the surface, are updated to coincide with the FAA's aeronautical database. The airport name also is corrected in the Class E 700 feet airspace area. Additionally, Class D Airspace is added to the title.

The FHWA, as the Federal Lead Agency, and the ADOT, as the Local Project Sponsor, are issuing this notice to advise the public of our intention to prepare a Tier 1 EIS for the Interstate 11 (I-11) Corridor between Nogales and Wickenburg, AZ (I-11 Corridor). The Tier 1 EIS will assess the potential social, economic, and natural environmental impacts of a vehicular transportation facility and potential multimodal facility (rail and utility) opportunities in the designated I-11 Corridor across a range of alternatives, including a ``No Build'' alternative. The Tier 1 EIS will be prepared in accordance with regulations implementing the National Environmental Policy Act (NEPA), and provisions of Fixing America's Surface Transportation Act (FAST) Act.

We are adopting a new airworthiness directive (AD) for all Airbus Model A330-200 Freighter, A330-200, A330-300, A340-200, A340- 300, A340-500, and A340-600 series airplanes. This AD was prompted by the results of endurance qualification tests on the trimmable horizontal stabilizer actuator (THSA), which revealed a partial loss of the no-back brake (NBB) efficiency in specific load conditions. This AD requires inspecting certain THSAs to determine the number of total flight cycles the THSA has accumulated, and replacing the THSA if necessary. We are issuing this AD to detect and correct premature wear of the carbon friction disks on the NBB of the THSA. Such a condition could lead to reduced braking efficiency in certain load conditions and, in conjunction with the inability of the power gear train to keep the ball screw in its last commanded position, could result in uncommanded movements of the trimmable horizontal stabilizer (THS) and loss of control of the airplane.

The FAA is issuing this notice to advise the public of the Twenty-Seventh RTCA Special Committee 216 meeting.

This document announces decisions by NHTSA that certain motor vehicles not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they are substantially similar to vehicles originally manufactured for sale in the United States and certified by their manufacturers as complying with the safety standards, and they are capable of being readily altered to conform to the standards or because they have safety features that comply with, or are capable of being altered to comply with, all applicable FMVSS.

We are superseding Airworthiness Directive (AD) 2014-20-01 for certain Bombardier, Inc. Model CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) airplanes. AD 2014-20-01 required repetitive inspections for any fuel leak in the right-hand landing lights compartment, and related investigative and corrective actions if necessary. AD 2014-20-01 also provides for an optional replacement of the connector of the fuel boost pump canister of the auxiliary power unit (APU), which terminates the repetitive inspections. This new AD requires replacing the connector of the fuel boost pump canister of the APU. This AD was prompted by the determination that a terminating action for the repetitive inspections is necessary. We are issuing this AD to detect and correct fuel leaks in the right-hand landing lights compartment, which, in combination with the heat generated by the taxi lights and landing lights on the ground reaching the auto-ignition temperature of the fuel, could result in ignition of any fuel or fumes present in the right-hand landing lights compartment.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 airplanes. This AD was prompted by a report of a pilot commanding an in-flight engine shut down in response to a low oil pressure warning indication. Further investigation revealed the mounting studs in the engine mounted alternating current (AC) generator mounting plate were pulled out of position and the threaded interface in the plate was corroded. This AD requires repetitive inspections for discrepancies on certain AC generator mounting adapters, and replacing discrepant adapters with serviceable ones. This AD also requires revising the maintenance program to incorporate a repetitive task specified in certain temporary revisions. We are issuing this AD to detect and correct corrosion in the AC generator mounting plate, which could result in a gap between the AC generator and the generator mounting plate, and cause loss of engine oil and consequent engine failure.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

The FAA is issuing this notice to advise the public of the Eighteenth RTCA NextGen Advisory Committee meeting.

FRA announces the charter renewal of the RSAC, a Federal Advisory Committee that develops railroad safety regulations through a consensus process. This charter renewal will take effect on May 16, 2016, and will expire after 2 years.

Chrysler Group, LLC (Chrysler), a wholly owned subsidiary of Fiat S.p.A., has determined that certain model year (MY) 2014 RAM 2500 and RAM 3500 trucks do not fully comply with paragraph S4.3 of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less, or do not fully comply with paragraph S5.3 of FMVSS No. 120, Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of more than 4,536 kilograms (10,000 pounds). Chrysler filed a report dated May 6, 2014, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports and amended that report on June 10, 2014. Chrysler then petitioned NHTSA under 49 CFR part 556 requesting a decision that the subject noncompliance is inconsequential to motor vehicle safety.

FTA is inviting the public to evaluate and provide comments on its Compendium of transit safety standards and protocols. The Fixing America's Surface Transportation Act (FAST Act) requires the Secretary of Transportation to conduct a review of public transportation safety standards and protocols to document existing standards and protocols and examine their efficacy. Following the review, the Secretary also is required to engage with the public in an evaluation of the standards to assess the need to establish additional Federal minimum public transportation safety standards. Upon completion of the review and evaluation, the Secretary must issue a report presenting the findings of the review of standards; the outcome of the evaluation; a comprehensive set of recommendations to improve the safety of the public transportation industry, including recommendations for regulatory changes, if applicable; and actions that the Secretary of the Department of Transportation will take to address the recommendations provided.

This notice provides information regarding FHWA's finding that a Buy America waiver is appropriate for the obligation of Federal-aid funds for 34 State projects involving the acquisition of vehicles and equipment on the condition that they be assembled in the U.S.

This action withdraws the Notice to collect information to process and report Unmanned Aircraft Systems (UAS) airborne and ground based observations by the public of drone behavior that they consider suspicious or illegal. The document contained errors, and needs further clarification.