Department of Transportation 2011 – Federal Register Recent Federal Regulation Documents
Results 1,601 - 1,650 of 2,969
Special Conditions: Gulfstream Aerospace LP (GALP) Model G250 Airplane Automatic Power Reserve (APR), an Automatic Takeoff Thrust Control System (ATTCS)
These special conditions are issued for the Gulfstream Aerospace LP (GALP) Model G250 airplane. This airplane will have a novel or unusual design feature associated with go-around performance credit for use of Automatic Power Reserve (APR), an Automatic Takeoff Thrust Control System (ATTCS). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Information Collection Available for Public Comments and Recommendations
In accordance with the Paperwork Reduction Act of 1995, this notice announces the Maritime Administration's (MARAD's) intentions to request extension of approval for three years of a currently approved information collection.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-0076 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-0077 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in 388.4 of MARAD's regulations at 46 CFR Part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-0078 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Offer for Public Sale of Two High Speed Vessels
MARAD is offering for public sale, on an ``as is, where is'' basis, two fast ferry vessels, ALAKAI, Official Number 1182234, and HUAKAI, Official Number 1215902.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-00709 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-0073 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2011-0075 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084, April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.
Proposed Amendment of Class E Airspace; Shelby, NC
This action proposes to amend Class E Airspace at Shelby, NC, as new Standard Instrument Approach Procedures have been developed at Shelby-Cleveland County Regional Airport. This action would enhance the safety and airspace management of Instrument Flight Rules (IFR) operations at the airport. This action also would recognize the airport name change to Shelby-Cleveland County Regional Airport.
Proposed Amendment to Class B Airspace; Seattle, WA
This action proposes to modify Class B airspace in Seattle, WA to contain aircraft conducting Instrument Flight Rules (IFR) approach procedures to Seattle-Tacoma International Airport (SEA). This action would further support the FAA's national airspace redesign goal of optimizing terminal and en route airspace areas to enhance safety, improving the flow of air traffic, and reducing the potential for near midair collision in the terminal area.
Proposed Establishment of Class E Airspace; Copperhill, TN
This action proposes to establish Class E Airspace at Copperhill, TN, to accommodate new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedures at Martin Campbell Field Airport. This action would enhance the safety and airspace management of Instrument Flight Rules (IFR) operations at the airport.
Proposed Modification of the Las Vegas, NV, Class B Airspace Area; Public Meetings
This notice announces three fact-finding informal airspace meetings to solicit information from airspace users and others, concerning a proposal to modify Class B airspace at Las Vegas, NV. The purpose of these meetings is to provide interested parties an opportunity to present views, recommendations, and comments on the proposal. All comments received during these meetings will be considered prior to any issuance of a notice of proposed rulemaking.
Special Conditions: Boeing Model 787 Series Airplanes; Seats With Inflatable Lapbelts
These special conditions are issued for the Boeing Model 787 series airplane. These airplanes will have a novel or unusual design feature(s) associated with seats with inflatable lapbelts. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Notice of Request for the Extension of a Currently Approved Information Collection
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to extend the following currently approved information collection: Reporting of Technical Activities by FTA Grant Recipients.
Proposed Amendment of Class E Airspace; Shelby, MT
This action proposes to modify Class E airspace at Shelby, MT. Controlled airspace is necessary to accommodate aircraft using Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at Shelby Airport. The FAA is proposing this action to enhance the safety and management of aircraft operations at the airport.
Proposed Establishment of Class D and Amendment of Class E Airspace; Los Angeles, CA
This action proposes to establish Class D airspace at Los Angeles International Airport, Los Angeles, CA. Controlled airspace is necessary to contain potential missed approaches at Los Angeles International Airport. The FAA is proposing this action to enhance the safety and management of aircraft operations at the airport. This action also would edit Class E airspace by adding the geographic coordinates and the airport name to the airspace designation.
Airworthiness Directives; Costruzioni Aeronautiche Tecnam srl Model P2006T Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires repetitive testing of the stabilizer takeoff warning switches, and corrective actions if necessary. This AD was prompted by reports that the warning horn did not sound during the takeoff warning system test of the S132 ``nose up stab takeoff warning switch.'' We are issuing this AD to detect and correct a takeoff warning system switch failure, which could reduce the ability of the flightcrew to maintain the safe flight and landing of the airplane.
Airworthiness Directives; Fokker Services B.V. Model F.28 Mark 0070 and 0100 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; The Boeing Company Model MD-90-30 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD requires a detailed inspection to detect distress and existing repairs to the leading edge structure of the vertical stabilizer at the splice at Station Zfs=52.267; repetitive inspections for cracking in the front spar cap forward flanges of the vertical stabilizer, and either the aft flanges or side skins; repetitive inspections for loose and missing fasteners; and related investigative and corrective actions if necessary. This AD was prompted by reports of cracked vertical stabilizer skin, a severed front spar cap, elongated fastener holes at the leading edge of the vertical stabilizer, and cracked front spar web and front spar cap bolt holes in the vertical stabilizer. We are issuing this AD to detect and correct such cracking damage, which could result in the structure being unable to support limit load, and could lead to the loss of the vertical stabilizer.
Airworthiness Directives; The Boeing Company Model 767 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. That AD currently requires, for certain airplanes, reworking the bonding jumper assemblies on the drain tube assemblies of the slat track housing of the wings. For certain other airplanes, the existing AD requires repetitive inspections of the drain tube assemblies of the slat track housing of the wings to find discrepancies, corrective actions if necessary, and terminating action for the repetitive inspections. This new AD also requires replacing the drain tube assemblies. For certain airplanes, this new AD also requires installing an additional electrostatic bond path for the number 5 and 8 inboard slat track drain tube assemblies. For certain other airplanes, this new AD also requires reworking the bonding jumper assembly. This new AD also revises the applicability to include additional airplanes. This AD was prompted by (1) reports of fuel leaks from certain drain locations of the slat track housing near the engine exhaust nozzle, which could result in a fire when the airplane is stationary, or taxiing at low speed; (2) reports of a bonding jumper assembly of certain drain tubes that did not meet bonding specifications and could result in electrostatic discharge and an in-tank ignition source; and (3) reports of fuel leaks onto the main landing gear (MLG) as a result of a cracked drain tube at the number 5 or 8 slat track housing, which could let fuel drain from the main fuel tanks into the dry bay area of the wings and onto hot MLG brakes and result in a fire.
Airworthiness Directives; Eurocopter France Model SA-365C, SA-365C1, SA-365C2, SA-365N, SA-365N1, AS-365N2, AS 365 N3, and SA-366G1 Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Eurocopter France (Eurocopter) helicopters. This action requires visually inspecting the adhesive bead between the bushing and the Starflex star (Starflex) arm for a crack, a gap, or loss of the adhesive bead, inspecting the Starflex arm ends for delamination, and replacing the Starflex if any of these conditions are found. This amendment is prompted by three cases of deterioration of a Starflex arm. In two of these cases, the deterioration caused high amplitude vibrations in flight, compelling the pilot to make a precautionary landing. The actions specified in this AD are intended to prevent failure of the Starflex, high-amplitude vibrations in flight, and subsequent loss of control of the helicopter.
Airworthiness Directives; Bell Helicopter Textron, Inc. Model 205A, 205A-1, 205B, 212, 412, 412CF, and 412EP Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron, Inc. (BHT) model helicopters with tail rotor (T[sol]R) blades with certain serial numbers installed. This action requires a one-time inspection of the T[sol]R blade for corrosion or pitting, and repairing or replacing the T[sol]R blade, if that condition is found during the inspection. This amendment is prompted by a report from the manufacturer that T[sol]R blades with certain serial numbers may have manufacturing anomalies in the spar area. These actions are intended to detect corrosion or pitting in the forward spar area of a T[sol]R blade to prevent a crack in the T[sol]R blade, loss of the T[sol]R blade, and subsequent loss of control of the helicopter.
Airworthiness Directives; Robinson Helicopter Company Model (Robinson) R22, R22 Alpha, R22 Beta, R22 Mariner, R44, and R44 II Helicopters
This amendment supersedes an existing airworthiness directive (AD) for the specified Robinson model helicopters that currently requires a visual inspection for skin separation along the leading edge of blade skin aft of the skin-to-spar bond line on the lower surface of each main rotor blade (blade) and in the tip cap area. The existing AD also requires a ``tap test'' for detecting a separation or void in both bonded areas and repainting any exposed area of the blades. If any separation or void is detected, the AD requires, before further flight, replacing the blade. Thereafter, before each flight, the existing AD also requires checking for any exposed (bare) metal along the skin-to- spar bond line on the lower surface of each blade near the tip. If any bare metal is found, that AD requires an inspection by a qualified mechanic. This amendment contains the same requirements but expands the applicability to include all serial-numbered model helicopters and limits the applicability to specific blade part numbers. This amendment also requires a repetitive inspection of the blade and any necessary rework. This amendment is prompted by a fatal accident in Israel. We have also included responses to comments objecting to the recording requirements in the current AD relating to the pilot checks before each flight and to comments that the burden of the before-each-flight pilot check exceeds the benefit. We have concluded that a check before the first flight of each day is sufficient for aviation safety. The actions specified by this AD are intended to provide more specific AD actions, to relieve the burdens associated with the before-each-flight check by changing it to a daily check, to detect blade skin debond, and to prevent blade failure and subsequent loss of control of the helicopter.
Training and Qualification Requirements for Check Airmen and Flight Instructors; Technical Amendment
The FAA is amending its regulations regarding separate requirements for check airmen who check only in flight simulators and flight instructors who instruct only in flight simulators. This document corrects minor technical errors in the codified text of those regulations.
Reports, Forms and Record Keeping Requirements; Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on March 3, 2011 (76 FR 11848). No comments were received. This document describes the collection of information for which NHTSA intends to seek OMB approval. The collection of information described is the ``Consolidated Child Restraint System Registration, Labeling and Defect Notification.'' (OMB Control Number: 2127-0576)
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections. This document describes one collection of information for parts 541, 565, and 567 for which NHTSA intends to seek OMB approval.
Pipeline Safety: Control Room Management/Human Factors
This rule expedites the program implementation deadlines in the Control Room Management/Human Factors regulations in order to realize the safety benefits sooner than established in the original rule. The deadline for pipeline operators to implement the procedures for roles and responsibilities, shift change, change management, and operating experience, fatigue mitigation education and training is now October 1, 2011, 16 months sooner than the original regulation. The deadline for pipeline operators to implement the other procedures for adequate information, shift lengths, maximum hours-of-service, and alarm management is now August 1, 2012, six months sooner than the original regulation. In general, training procedures must also be implemented by August 1, 2012, with certain exceptions.
Agency Information Collection Activities: Notice of Request for Approval of a New Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval of a new information collection that is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Request for Comments for a New Information Collection, Titled: Reports, Forms and Recordkeeping Requirements
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under SUPPLEMENTARY INFORMATION. We published a Federal Register Notice with a 60-day public comment period on this information collection on February 26, 2009. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Amendment of Federal Airways; Alaska
This action changes the effective date for the amendment of all Anchorage, AK, Federal Airways that are affected by the relocation of the Anchorage VHF Omnidirectional Range (VOR) navigation aid. The FAA is taking this action due to a failed flight inspection.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Canexus Chemicals Canada L.P. v. BNSF Railway Company
In a decision served on June 8, 2011, the Board announced that it has tentatively scheduled an oral argument in this complaint proceeding. Dates/Location: The oral argument is tentatively scheduled to be held Thursday, June 23, 2011, at 2 p.m., or at a later time that afternoon designated by the Board, in the hearing room at the Board's headquarters located at 395 E Street, SW., Washington, DC.
Track Safety Standards; Concrete Crossties
This document delays the effectiveness of the final rule, which mandates specific requirements for effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final rule on April 1, 2011, and the final rule was scheduled to take effect on July 1, 2011. FRA received two petitions for reconsideration in response to the final rule that contain substantive issues requiring a detailed response. Accordingly, in order to fully respond to the petitions for reconsideration, this document delays the effective date of the final rule until October 1, 2011.
Agency Information Collection Activities; Proposed Collection; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery
As part of a Federal Government-wide effort to streamline the process to seek feedback from the public on service delivery, the Surface Transportation Board has submitted a Generic Information Collection Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery '' to OMB for approval under the Paperwork Reduction Act (PRA) (44 U.S.C. 3501 et. seq.).
Airworthiness Directives; The Boeing Company Model 767 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD would require modification of the fluid drain path in the leading edge area of the wing. This proposed AD was prompted by a design review following a ground fire incident and reports of flammable fluid leaks from the wing leading edge area onto the engine exhaust area. We are proposing this AD to prevent flammable fluid from leaking onto the engine exhaust nozzle which could result in a fire.
Reports, Forms, and Recordkeeping Requirements
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on March 28, 2011 (76 FR 17186).
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
