Reports of Injuries to Employees Operating Mechanical Power Presses; Extension of the Office of Management and Budget's (OMB) Approval of an Information Collection (Paperwork) Requirements, 17449-17450 [2018-08222]
Download as PDF
Federal Register / Vol. 83, No. 76 / Thursday, April 19, 2018 / Notices
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2012–0017]
Reports of Injuries to Employees
Operating Mechanical Power Presses;
Extension of the Office of Management
and Budget’s (OMB) Approval of an
Information Collection (Paperwork)
Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning its proposal to
extend OMB approval of the
information collection requirement
contained in the Standard on Reports of
Injuries to Employees Operating
Mechanical Power Presses.
DATES: Comments must be submitted
(postmarked, sent, or received) by June
18, 2018.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit a
copy of your comments and attachments
to the OSHA Docket Office, Docket No.
OSHA–2012–0017, Occupational Safety
and Health Administration, U.S.
Department of Labor, Room N–3653,
200 Constitution Avenue NW,
Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
courier service) are accepted during the
Docket Office’s normal business hours,
10:00 a.m. to 3:00 p.m., ET.
Instructions: All submissions must
include the Agency name and the OSHA
docket number (OSHA–2012–0017) for
the Information Collection Request
(ICR). All comments, including any
personal information you provide, are
placed in the public docket without
change, and may be made available
online at https://www.regulations.gov.
For further information on submitting
comments, see the ‘‘Public
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION.
Docket: To read or download
comments or other material in the
daltland on DSKBBV9HB2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:49 Apr 18, 2018
Jkt 244001
docket, go to https://www.regulations.gov
or the OSHA Docket Office at the above
address. All documents in the docket
(including this Federal Register notice)
are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download from the website. All
submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney at
the number below to obtain a copy of
the ICR.
FOR FURTHER INFORMATION CONTACT:
Theda Kenney or Charles McCormick,
Directorate of Standards and Guidance,
OSHA, U.S. Department of Labor,
telephone (202) 693–2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a preclearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995
(PRA–95) (44 U.S.C. 3506(c)(2)(A)). This
program ensures that information is in
the desired format, reporting burden
(time and costs) is minimal, collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (the OSH Act) (29 U.S.C. 651 et
seq.) authorizes information collection
by employers as necessary or
appropriate for enforcement of the OSH
Act or for developing information
regarding the causes and prevention of
occupational injuries, illnesses, and
accidents (29 U.S.C. 657). The OSH Act
also requires that OSHA obtain such
information with minimum burden
upon employers, especially those
operating small businesses, and to
reduce to the maximum extent feasible
unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
In the event that a worker is injured
while operating a mechanical power
press, 29 CFR 1910.217(g) requires the
employer to report, within 30 days of
the occurrence, all point-of-operation
injuries to the operators or other
employees to either the Director of the
Directorate of Standards and Guidance
at OSHA, U.S. Department of Labor,
Washington, DC 20210 or electronically
at https://www.osha.gov/pls/oshaweb/
mechanical.html; or to the State Agency
administering a plan approved by the
PO 00000
Frm 00091
Fmt 4703
Sfmt 4703
17449
Assistant Secretary of Labor for
Occupational Safety and Health. This
information includes the employer’s
and worker’s name(s), workplace
address and location; injury sustained;
task being performed when the injury
occurred; number of operators required
for the operation and the number of
operators provided with controls and
safeguards; cause of the incident; type of
clutch, safeguard(s), and feeding
method(s) used; and means used to
actuate the press stroke. These reports
are a source of up-to-date information
on power press machines. Specifically,
this information identifies the
equipment used and conditions
associated with these injuries.
OSHA’s Mechanical Power Press
injury reporting requirement at
1910.217(g) is a separate injury
reporting requirement from OSHA’s
severe injury reporting requirements
which are part of 1904.39. Under
1904.39, employers must, within 24
hours, report to OSHA any work-related
injury requiring hospitalization as well
as work-related incidents resulting in an
amputation or loss of an eye. The
Mechanical Power Press Standard
requires employers to report all injuries
involving operation of a power press to
OSHA or an appropriate state agency
within 30 days. Injuries that must be
reported under 1910.217(g) include
those that are also reportable under
1904.39 as well as those that are
recordable under the recordkeeping
standard (29 CFR 1904).
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply. For
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend
its approval of the information
collection requirement contained in the
Standard on Reports of Injuries to
Employees Operating Mechanical Power
Presses (29 CFR 1910.217(g)). There are
no adjustments or program changes
E:\FR\FM\19APN1.SGM
19APN1
17450
Federal Register / Vol. 83, No. 76 / Thursday, April 19, 2018 / Notices
daltland on DSKBBV9HB2PROD with NOTICES
associated with this ICR. The Agency
requests that it retain its previous
estimate of 400 burden hours.
Type of Review: Extension of a
currently approved collection.
Title: Reports of Injuries to Employees
Operating Mechanical Power Presses (29
CFR 1910.217(g)).
OMB Control Number: 1218–0070.
Affected Public: Business or other forprofits.
Number of Respondents: 1,200.
Frequency of Responses: On occasion.
Average Time per Response: Various.
Estimated Total Burden Hours: 400.
Estimated Cost (Operation and
Maintenance): $0.
submit comments and access the docket
is available at the website’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available from the website, and for
assistance in using the internet to locate
docket submissions.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile (fax); or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number for the
ICR (Docket No. OSHA–2012–0017).
You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your name,
date, and the docket number so the
Agency can attach them to your
comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office
at (202) 693–2350, TTY (877) 889–5627.
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as their
social security number and date of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this website.
All submissions, including
copyrighted material, are available for
inspection and copying at the OSHA
Docket Office. Information on using the
https://www.regulations.gov website to
Signed at Washington, DC, on April 13,
2018.
Loren Sweatt,
Deputy Assistant Secretary of Labor for
Occupational Safety and Health.
VerDate Sep<11>2014
17:49 Apr 18, 2018
Jkt 244001
V. Authority and Signature
Loren Sweatt, Deputy Assistant
Secretary of Labor for Occupational
Safety and Health, directed the
preparation of this notice. The authority
for this notice is the Paperwork
Reduction Act of 1995 (44 U.S.C. 3506
et seq.) and Secretary of Labor’s Order
No. 1–2012 (77 FR 3912).
[FR Doc. 2018–08222 Filed 4–18–18; 8:45 am]
BILLING CODE 4510–26–P
NUCLEAR REGULATORY
COMMISSION
[NRC–2013–0185 and NRC–2014–0005]
Program-Specific Guidance About
Irradiator Licenses and ProgramSpecific Guidance About Academic,
Research and Development, and Other
Licenses of Limited Scope, Including
Electron Capture Devices and X-Ray
Fluorescence Analyzers
Nuclear Regulatory
Commission.
ACTION: NUREG; issuance.
AGENCY:
The U.S. Nuclear Regulatory
Commission (NRC) has issued Revision
1 to NUREG–1556, Volume 6,
‘‘Consolidated Guidance about Materials
Licenses: Program-Specific Guidance
About 10 CFR part 36 Irradiator
Licenses,’’ and Volume 7, ‘‘Consolidated
Guidance about Materials Licenses:
Program-Specific Guidance About
Academic, Research and Development,
and Other Licenses of Limited Scope,
Including Electron Capture Devices and
X-Ray Fluorescence Analyzers.’’
NUREG–1556 Volumes 6 and 7 have
been revised to include information on
updated regulatory requirements, safety
culture, security of radioactive
materials, protection of sensitive
information, and changes in regulatory
policies and practices. These volumes
are intended for use by applicants,
licensees, and the NRC staff.
DATES: NUREG 1556, Volume 6,
Revision 1, was published in January,
2018, and Volume 7, Revision 1, was
published in February, 2018.
SUMMARY:
PO 00000
Frm 00092
Fmt 4703
Sfmt 4703
Please refer to Docket ID
NRC 2013–0185 (Volume 6, Revision 1)
and NRC–2014–0005 (Volume 7,
Revision 1) when contacting the NRC
about the availability of information
regarding these documents. You may
obtain publicly-available information
related to these documents using any of
the following methods:
• Federal Rulemaking Website: Go to
https://www.regulations.gov and search
for Docket ID NRC–2013–0185 or NRC–
2014–0005. Address questions about
NRC dockets to Jennifer Borges;
telephone: 301–287–9127; email:
Jennifer.Borges@nrc.gov. For technical
questions, contact the individual listed
in the FOR FURTHER INFORMATION
CONTACT section of this document.
• NRC’s Agencywide Documents
Access and Management System
(ADAMS): You may obtain publiclyavailable documents online in the
ADAMS Public Documents collection at
https://www.nrc.gov/reading-rm/
adams.html. To begin the search, select
‘‘ADAMS Public Documents’’ and then
select ‘‘Begin Web-based ADAMS
Search.’’ For problems with ADAMS,
please contact the NRC’s Public
Document Room (PDR) reference staff at
1–800–397–4209, 301–415–4737, or by
email to pdr.resource@nrc.gov. NUREG–
1556, Volumes 6 and 7, Revision 1, are
located at ADAMS Accession Numbers
ML18026A698 and ML18065A006,
respectively. These documents are also
available on the NRC’s public website at
https://www.nrc.gov/reading-rm/doccollections/nuregs/staff/sr1556/ under
‘‘Consolidated Guidance About
Materials Licenses (NUREG–1556).’’
• NRC’s PDR: You may examine and
purchase copies of public documents at
the NRC’s PDR, Room O1–F21, One
White Flint North, 11555 Rockville
Pike, Rockville, Maryland 20852.
FOR FURTHER INFORMATION CONTACT:
Anthony McMurtray, Office of Nuclear
Material Safety and Safeguards; U.S.
Nuclear Regulatory Commission,
Washington, DC 20555–0001; telephone:
301–415–2746; email:
Anthony.McMurtray@nrc.gov.
SUPPLEMENTARY INFORMATION:
ADDRESSES:
I. Discussion
The NRC issued revisions to NUREG–
1556, Volumes 6 and 7, to provide
guidance to existing materials licensees
covered under these types of licenses
and to applicants preparing an
application for one of these types of
materials licenses. These NUREG
volumes also provide the NRC staff with
criteria for evaluating these types of
license applications. The purpose of this
notice is to notify the public that the
E:\FR\FM\19APN1.SGM
19APN1
Agencies
[Federal Register Volume 83, Number 76 (Thursday, April 19, 2018)]
[Notices]
[Pages 17449-17450]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2018-08222]
[[Page 17449]]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2012-0017]
Reports of Injuries to Employees Operating Mechanical Power
Presses; Extension of the Office of Management and Budget's (OMB)
Approval of an Information Collection (Paperwork) Requirements
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Request for public comments.
-----------------------------------------------------------------------
SUMMARY: OSHA solicits public comments concerning its proposal to
extend OMB approval of the information collection requirement contained
in the Standard on Reports of Injuries to Employees Operating
Mechanical Power Presses.
DATES: Comments must be submitted (postmarked, sent, or received) by
June 18, 2018.
ADDRESSES:
Electronically: You may submit comments and attachments
electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal. Follow the instructions online for submitting
comments.
Facsimile: If your comments, including attachments, are not longer
than 10 pages you may fax them to the OSHA Docket Office at (202) 693-
1648.
Mail, hand delivery, express mail, messenger, or courier service:
When using this method, you must submit a copy of your comments and
attachments to the OSHA Docket Office, Docket No. OSHA-2012-0017,
Occupational Safety and Health Administration, U.S. Department of
Labor, Room N-3653, 200 Constitution Avenue NW, Washington, DC 20210.
Deliveries (hand, express mail, messenger, and courier service) are
accepted during the Docket Office's normal business hours, 10:00 a.m.
to 3:00 p.m., ET.
Instructions: All submissions must include the Agency name and the
OSHA docket number (OSHA-2012-0017) for the Information Collection
Request (ICR). All comments, including any personal information you
provide, are placed in the public docket without change, and may be
made available online at https://www.regulations.gov. For further
information on submitting comments, see the ``Public Participation''
heading in the section of this notice titled SUPPLEMENTARY INFORMATION.
Docket: To read or download comments or other material in the
docket, go to https://www.regulations.gov or the OSHA Docket Office at
the above address. All documents in the docket (including this Federal
Register notice) are listed in the https://www.regulations.gov index;
however, some information (e.g., copyrighted material) is not publicly
available to read or download from the website. All submissions,
including copyrighted material, are available for inspection and
copying at the OSHA Docket Office. You may also contact Theda Kenney at
the number below to obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT: Theda Kenney or Charles McCormick,
Directorate of Standards and Guidance, OSHA, U.S. Department of Labor,
telephone (202) 693-2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its continuing effort to reduce
paperwork and respondent (i.e., employer) burden, conducts a
preclearance consultation program to provide the public with an
opportunity to comment on proposed and continuing information
collection requirements in accordance with the Paperwork Reduction Act
of 1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that
information is in the desired format, reporting burden (time and costs)
is minimal, collection instruments are clearly understood, and OSHA's
estimate of the information collection burden is accurate. The
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651
et seq.) authorizes information collection by employers as necessary or
appropriate for enforcement of the OSH Act or for developing
information regarding the causes and prevention of occupational
injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also
requires that OSHA obtain such information with minimum burden upon
employers, especially those operating small businesses, and to reduce
to the maximum extent feasible unnecessary duplication of efforts in
obtaining information (29 U.S.C. 657).
In the event that a worker is injured while operating a mechanical
power press, 29 CFR 1910.217(g) requires the employer to report, within
30 days of the occurrence, all point-of-operation injuries to the
operators or other employees to either the Director of the Directorate
of Standards and Guidance at OSHA, U.S. Department of Labor,
Washington, DC 20210 or electronically at https://www.osha.gov/pls/oshaweb/mechanical.html; or to the State Agency administering a plan
approved by the Assistant Secretary of Labor for Occupational Safety
and Health. This information includes the employer's and worker's
name(s), workplace address and location; injury sustained; task being
performed when the injury occurred; number of operators required for
the operation and the number of operators provided with controls and
safeguards; cause of the incident; type of clutch, safeguard(s), and
feeding method(s) used; and means used to actuate the press stroke.
These reports are a source of up-to-date information on power press
machines. Specifically, this information identifies the equipment used
and conditions associated with these injuries.
OSHA's Mechanical Power Press injury reporting requirement at
1910.217(g) is a separate injury reporting requirement from OSHA's
severe injury reporting requirements which are part of 1904.39. Under
1904.39, employers must, within 24 hours, report to OSHA any work-
related injury requiring hospitalization as well as work-related
incidents resulting in an amputation or loss of an eye. The Mechanical
Power Press Standard requires employers to report all injuries
involving operation of a power press to OSHA or an appropriate state
agency within 30 days. Injuries that must be reported under 1910.217(g)
include those that are also reportable under 1904.39 as well as those
that are recordable under the recordkeeping standard (29 CFR 1904).
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
Whether the proposed information collection requirements
are necessary for the proper performance of the Agency's functions,
including whether the information is useful;
The accuracy of OSHA's estimate of the burden (time and
costs) of the information collection requirements, including the
validity of the methodology and assumptions used;
The quality, utility, and clarity of the information
collected; and
Ways to minimize the burden on employers who must comply.
For example, by using automated or other technological information
collection and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend its approval of the information
collection requirement contained in the Standard on Reports of Injuries
to Employees Operating Mechanical Power Presses (29 CFR 1910.217(g)).
There are no adjustments or program changes
[[Page 17450]]
associated with this ICR. The Agency requests that it retain its
previous estimate of 400 burden hours.
Type of Review: Extension of a currently approved collection.
Title: Reports of Injuries to Employees Operating Mechanical Power
Presses (29 CFR 1910.217(g)).
OMB Control Number: 1218-0070.
Affected Public: Business or other for-profits.
Number of Respondents: 1,200.
Frequency of Responses: On occasion.
Average Time per Response: Various.
Estimated Total Burden Hours: 400.
Estimated Cost (Operation and Maintenance): $0.
IV. Public Participation--Submission of Comments on This Notice and
Internet Access to Comments and Submissions
You may submit comments in response to this document as follows:
(1) electronically at https://www.regulations.gov, which is the Federal
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All
comments, attachments, and other material must identify the Agency name
and the OSHA docket number for the ICR (Docket No. OSHA-2012-0017). You
may supplement electronic submissions by uploading document files
electronically. If you wish to mail additional materials in reference
to an electronic or facsimile submission, you must submit them to the
OSHA Docket Office (see the section of this notice titled ADDRESSES).
The additional materials must clearly identify your electronic comments
by your name, date, and the docket number so the Agency can attach them
to your comments.
Because of security procedures, the use of regular mail may cause a
significant delay in the receipt of comments. For information about
security procedures concerning the delivery of materials by hand,
express delivery, messenger, or courier service, please contact the
OSHA Docket Office at (202) 693-2350, TTY (877) 889-5627.
Comments and submissions are posted without change at https://www.regulations.gov. Therefore, OSHA cautions commenters about
submitting personal information such as their social security number
and date of birth. Although all submissions are listed in the https://www.regulations.gov index, some information (e.g., copyrighted
material) is not publicly available to read or download from this
website.
All submissions, including copyrighted material, are available for
inspection and copying at the OSHA Docket Office. Information on using
the https://www.regulations.gov website to submit comments and access
the docket is available at the website's ``User Tips'' link. Contact
the OSHA Docket Office for information about materials not available
from the website, and for assistance in using the internet to locate
docket submissions.
V. Authority and Signature
Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational
Safety and Health, directed the preparation of this notice. The
authority for this notice is the Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 (77 FR
3912).
Signed at Washington, DC, on April 13, 2018.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2018-08222 Filed 4-18-18; 8:45 am]
BILLING CODE 4510-26-P