Federal Aviation Administration 2019 – Federal Register Recent Federal Regulation Documents

This action corrects the header text for the Class D and Class E airspace areas for Olympia, WA. The state abbreviation for the location of the airport in the header is corrected from OR to WA. This does not affect the charted boundaries or operating requirements of the airspace.

This action removes Class E airspace extending upward from 700 feet above the surface at Morgan City, LA. This action due to the cancellation of the standard instrument approach procedures at the heliport making the airspace no longer necessary.

The Federal Aviation Administration is requesting public comment on a request by the City of Tallahassee to change a portion of airport property from aeronautical to non-aeronautical use at the Tallahassee International Airport, Tallahassee City, Florida. The request consists of approximately 317.37 acres of vacant property located on the western side of the airport property boundary. Present fair market value of the property is $157,098 annually. Documents reflecting the Sponsor's request are available, by appointment only, for inspection at the Tallahassee International Airport and the FAA Airports District Office.

We are superseding Airworthiness Directive (AD) 2018-17-01 for Bell Model 212, 412, 412CF, and 412EP helicopters. AD 2018-17-01 required replacing certain oil and fuel check valves and prohibited installing these valves on any helicopter. This AD retains the requirements of AD 2018-17-01 but expands those requirements for all model helicopters. This AD was prompted by the discovery that we omitted a helicopter model from one of the required actions. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada Limited (Bell) Model 206A, 206B, 206L, 206L- 1, 206L-3, 206L-4, and 407 helicopters. This AD requires inspecting and cleaning the oil supply restrictor (restrictor) to the freewheel assembly. This AD was prompted by reports of a blocked oil line restrictor in the freewheel lubrication system. The actions of this AD are intended to address an unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain International Aero Engines AG (IAE) V2500 model turbofan engines. This proposed AD was prompted by an inspection that determined that material anomalies exist in certain low-pressure turbine (LPT) stage 6 disks. This proposed AD would require removal from service of the affected LPT stage 6 disks and their replacement with a part eligible for installation. We are proposing this AD to address the unsafe condition on these products.

This action proposes to remove Class E airspace extending upward from 700 feet above the surface at Meyers-Divers' Airport and Tecumseh Products Airport, Tecumseh, MI. The FAA is proposing this action due to the cancellation of the instrument procedures; and the airspace is no longer required.

This action modifies Class E airspace extending upward from 700 feet above the surface at Denison Municipal Airport, Denison, IA. This action is due to the decommissioning of the Denison non- directional radio beacon (NDB). Additionally, the geographic coordinates are being updated to coincide with the FAA's aeronautical database.

This action modifies Class E airspace extending upward from 700 feet above the surface at Charleston, Mississippi County Airport in Charleston, MO. This action is due to the decommissioning of the Charleston non-directional radio beacon (NDB).

This action amends Class E airspace for the Cambridge- Dorchester Regional Airport, Cambridge, MD, by correcting the airspace designation header in the 7400.11 to coincide with the FAA's aeronautical database. This does not affect the boundaries or operating requirements of the airspace.

This action provides notice of the statutory exception for limited recreational operations of unmanned aircraft. It also describes the agency's incremental implementation approach for the exception and how individuals can operate recreational unmanned aircraft (commonly referred to as drones) today under the exception.

This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Forest City Municipal Airport, Forest City, IA. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Forest City non-directional beacon (NDB), which provided navigation information for the instrument procedures at this airport. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.

The FAA proposes to rule and invites public comment on the interim release of the aeronautical use only provision for land at the Lake Louise Airport, Lake Louise, Alaska.

The FAA proposes to revise its standards for pressurized compartment loads such that partitions located immediately adjacent to a decompression hole need not be designed to withstand certain decompression conditions. This action is necessary because, in some cases, it is not practical to design partitions in certain airplane compartments to withstand a large decompression event that occurs within that compartment. Even though individual partition failure would be allowed, continued safe flight and landing would still be required.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves an automated application process for employment with the Federal Aviation Administration. Applicants access an online form that is presented with requests for certain information. The information collected is necessary to determine basic eligibility for employment and potential eligibility for Veteran's Preference, Veteran's Readjustment Act, and People with Disability appointments. In addition, there are specific occupation questions that assist the FAA Office of Human Resource Management (AHR) in determining candidates' qualifications in order that the best-qualified candidates are hired for the many FAA occupations.

We propose to adopt a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes; Model CL-600-2C10 (Regional Jet Series 700, 701 & 702) airplanes; Model CL-600-2D15 (Regional Jet Series 705) airplanes; Model CL-600-2D24 (Regional Jet Series 900) airplanes; and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This proposed AD was prompted by a report that during Automatic Flight Control System (AFCS) ALTS CAP or (V) ALTS CAP mode the flight guidance/autopilot does not account for engine failure while capturing an altitude. This proposed AD would require revising the airplane flight manual (AFM) to include a limitation and abnormal operating procedure for the AFCS. We are proposing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This proposed AD was prompted by a report that main landing gear (MLG) side stay actuators have been assembled using nonconforming split ball bearings. This proposed AD would require verification of the serial numbers of the installed MLG side stay actuator assemblies, and replacement of the affected parts. We are proposing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Information to be collected is necessary to insure the safety of the flying public. Documentation of maintenance repair actions record who, what, when, where and how of the task performed. All maintenance actions as well as documentation are required. This collection focuses on the Form 337 which is collected by the FAA. Other records for preventative maintenance, and logbook entries are not collected by the FAA serve as a responsibility of the owner to maintain in case of verification of airworthiness when seeking approvals or sale of the aircraft. This insures proper certification of personnel; proper tooling is utilized and accurate measures to insure safety. Total form 337s submitted in 2017 is 54,237. Total aircraft registrations on file is 289,490. It is estimated by the numbers collected one in every five aircraft have a 337 form submitted for major alteration and repairs performed. Each 337 takes approximately 1 hour.

The FAA withdraws a notice of proposed rulemaking (NPRM) that proposed a new airworthiness directive (AD), which would have applied to all Airbus SAS Model A330-200 Freighter, A330-200, and A330-300 series airplanes. The NPRM would have required reinforcement modifications of various structural parts of the fuselage, and related investigative and corrective actions if necessary. Since the NPRM was issued, we have determined that more restrictive maintenance requirements are necessary and that the NPRM does not adequately address the identified unsafe condition. Accordingly, the NPRM is withdrawn.

We propose to adopt a new airworthiness directive (AD) for certain Learjet Inc. Model 60 airplanes. This proposed AD was prompted by a report of a reverse thrust command accelerating the airplane instead of decelerating the airplane. The acceleration with reverse thrust commanded occurred when the thrust reverser doors were in the stowed position instead of the deployed position. This proposed AD would require installing a Thrust Reverser (T/R) Voice Command Warning System (VCWS) to alert the crew of a T/R malfunction. We are proposing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on March 1, 2019 for information used to issue special flight authorizations for non-revenue transports and non-transport jet operations of Stage 2 airplanes at U.S. airports. Only a minimal amount of data is requested to identify the affected parties and determine whether the purpose for the flight is one of those enumerated by law. This collection is required under the Airport Noise and Capacity Act of 1990 and the FAA Modernization and Reform Act of 2012.

In accordance with the Paperwork Reduction Act of 1995, the FAA invites public comments on its proposed collection of information pursuant to changes to the FAA's commercial space transportation regulations proposed in the ``Streamlined Launch and Reentry Licensing Requirements'' notice of proposed rulemaking (NPRM). A copy of the NPRM is available in the docket for this notice. This information collection would consolidate two previously approved information collections under one, new OMB Control Number. This collection would allow the FAA to continue ensuring commercial space activities do not unduly jeopardize public health and safety, safety of property, or the national security and foreign policy interests of the United States. The FAA intends to request the Office of Management and Budget's approval of this information collection.

We are adopting a new airworthiness directive (AD) for certain Viking Air Limited Model CL-215-6B11 (CL-215T Variant) and CL-215-6B11 (CL-415 Variant) airplanes. This AD was prompted by a report that a supplier fabricated Teflon parts with a charge of 15 percent fiberglass content instead of the specified 5 percent fiberglass content. This AD requires repetitive detailed visual inspections of the aileron control system cables and flap interconnect system cables for damage or disconnected cables, corrective actions if necessary, and replacement of the Teflon parts in the aileron control systems, aileron/rudder interconnect, and aileron power unit beam. The replacement of these parts terminates the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of cracking in the frame web, frame integral inboard chord, and fail-safe chord on multiple airplanes in multiple locations between stringers S-10 and S- 17 above the passenger floor, in addition to an evaluation by the design approval holder (DAH) indicating that certain fuselage frame splices are subject to widespread fatigue damage (WFD). This AD requires repetitive inspections of certain fuselage upper frames, side frames, fail-safe chords, inboard chords, frame webs, and stringers; an inspection for open tooling holes and the presence of repairs in certain inspection zones; and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request Office of Management and Budget (OMB) renewal approval for information collection 2120-0765. Aircraft registration is necessary to ensure personal accountability among all users of the national airspace system. Aircraft registration also allows the FAA and law enforcement agencies to address non-compliance by providing the means for identifying an aircraft's owner and operator. This collection also permits individuals to de-register or update their record in the registration database.