Federal Aviation Administration March 26, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 16 of 16
Notice of Availability of the Finding of No Significant Impact and Record of Decision for the Final Environmental Assessment (EA), Section 4(f) Evaluation, and Notice of Alaska National Interests Lands Conservation Act (ANILCA) Section 810 Evaluation for the Proposed Airport Improvement Project for the Barter Island Airport, Kaktovik, AK
The FAA is announcing the availability of the Finding of No Significant Impact/Record of Decision (FONSI/ROD) for the Final EA, Section 4(f) Evaluation, and Notice of ANILCA Section 810 Evaluation for Barter Island Airport Improvement Project, Kaktovik, AK. The FONSI/ ROD provides final agency determinations and approvals for the proposed development.
Airworthiness Directives; Airbus Model A330-201, -202, -203, -223, -243, -301, -302, -303, -321, -322, -323, -341, -342, and -343 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Dassault Model Mystere-Falcon 20-C5, 20-D5, 20-E5, and 20-F5 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A330-300, A340-200, and A340-300 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Operations in Controlled Airspace Designated for an Airport
This final rule revises an incorrect cross-reference in the regulations regarding operations in controlled airspace designated for an airport. The current regulations cross-reference a particular paragraph that no longer exists. This final rule updates the cross- reference so that the reader will be able to find the appropriate weather minimum limitations on visual flight rules for aircraft in controlled airspace near airports.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR 23.562. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 Airplanes and Model ERJ 190 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; General Electric Company CF6-80C2 and CF6-80E1 Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF6-80C2 and CF6-80E1 series turbofan engines with high-pressure compressor rotor (HPCR) spool shaft stage 14 disks, part number (P/N) 1703M49G02, 1703M49G03, or 1509M71G10 installed. This AD requires a one-time eddy current inspection (ECI) of the HPCR spool shaft stage 14 disk web for crack indications, and removing from service any parts with web cracks. This AD results from reports of 12 HPCR spool shaft stage 14 disks with web cracks discovered to date. We are issuing this AD to prevent cracks from propagating to an uncontained failure of the disk and damage to the airplane.
Airworthiness Directives; Hawker Beechcraft Corporation Model MU-300-10 Airplanes and Model 400 and 400A Series Airplanes; and Raytheon (Mitsubishi) Model MU-300 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain BEECH Model 400, 400A, and MU-300-10 airplanes. That AD currently requires installation of an improved adjustment mechanism on the flightcrew seats and replacement of the existing aluminum seat reinforcement assemblies with steel assemblies. This new AD would add airplanes to the applicability of the existing AD. This AD results from reports of incomplete latching of the existing adjustment mechanism and cracked reinforcement assemblies, which could result in sudden shifting of a flightcrew seat. We are issuing this AD to prevent sudden shifting of a flightcrew seat, which could impair the flightcrew's ability to control the airplane.
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) Airplanes, Model CL-600-2D15 (Regional Jet Series 705) Airplanes, and Model CL-600-2D24 (Regional Jet Series 900) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on November 4, 2008, vol. 73, no. 214, page 65714. The FAA uses the information gathered from Grand Canyon National Park air tour operators to monitor their compliance with the Federal regulations.
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on October 31, 2008, vol. 73, no. 212, pages 65005-65006. The requested information is needed to mitigate potential hazards presented by airmen using alcohol or drugs in flight, to identify persons possibly unsuitable for pilot certification.
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on October 31, 2008, vol. 73, no. 212, pages 65005. The information is collected from holders of FAA production approvals and selected suppliers to obtain their input on how well the agency is performing the administration and conduct of the Aircraft Certification Systems Evaluation Program (ACSEP).
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.