Federal Aviation Administration December 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 50 of 123
Airworthiness Directives; Raytheon Aircraft Company Model 390 Airplanes
The FAA is adopting a new airworthiness directive (AD) to supersede AD 2006-02-51, which applies to certain Raytheon Aircraft Company Model 390 airplanes. AD 2006-02-51 currently requires you to inspect the left engine hydraulic pump outlet tube and the clamp; replace the clamp at each inspection; replace the hydraulic pump outlet tube immediately if any problem is found; and report the results of each inspection or replacement to the FAA. This AD is the result of several hydraulic pump outlet tube failures after issuance of AD 2006- 02-51, including failures on the right engine. This AD requires you to visually inspect the hydraulic pump outlet tube on both engines on a recurring basis and immediately replace the tube if damage is found. This AD also requires incorporation of an Airplane Flight Manual (AFM) change to not allow operation of an engine with its associated firewall hydraulic shutoff valve closed. In addition, this AD requires you to replace the hydraulic pump outlet tube if an engine is operated with its firewall hydraulic shutoff valve closed. We are issuing this AD to prevent failure of the hydraulic pump outlet tube and consequent leaking of hydraulic fluid. Such leakage could result in a fire. There is also a risk of loss of hydraulic system functions including normal gear extensions, speed brakes, roll spoilers, lift dump, and normal brakes.
Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Fokker Model F.28 Mark 0070 and 0100 airplanes. This proposed AD would require inspecting the carbon-fiber reinforced plastic (CFRP) main landing gear (MLG) door to determine whether certain part numbers are installed. For airplanes having certain doors, this proposed AD would require inspecting the MLG outboard door for cracks, play, and loose sealant/bolts/nuts, and related investigative and corrective actions if necessary. This proposed AD would also require, for airplanes having certain doors, modifying the rod bracket attachment of the MLG outboard door. This proposed AD results from a report of a rod bracket of the MLG door detaching during flight. We are proposing this AD to detect and correct cracks in the rod bracket attachment bolts, which could result in the rod brackets detaching from the MLG door and blocking the proper functioning of the MLG.
Airworthiness Directives; Airbus Model A330 Airplanes and A340-200 and -300 Series Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Model A330 airplanes and A340-200 and -300 series airplanes. For certain airplanes, this proposed AD would require inspecting to determine the part number of certain S4- and MZ-type spoiler servo-controls (SSCs). For certain other airplanes, this proposed AD would require inspecting to determine the part number of all SSCs. This proposed AD would also require replacing any affected SSC with a new SSC. This proposed AD results from a new load duty cycle defined by the manufacturer. Additional fatigue tests and calculations done on this basis indicated that the spoiler valve manifold of the S4- type SSCs, and, on certain airplanes, the maintenance cover of the MZ- type SSCs, may crack during its service life due to pressure impulse fatigue. We are proposing this AD to prevent fatigue cracking of certain SSCs, which could result in hydraulic leakage and consequent loss of SSC function and loss of the associated hydraulic system. These conditions could affect all three hydraulic systems, which could result in reduced controllability of the airplane.
Airworthiness Directives; Airbus Model A319, A320, and A321 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Model A319, A320, and A321 airplanes. This proposed AD would require installing spacer assemblies at the attachment points of the YZ-latches of the cargo loading system in the forward and aft cargo compartments, as applicable. This proposed AD results from tests that have shown that the attachment points of the YZ-latches of the cargo loading system fail under maximum loads. We are proposing this AD to prevent failure of the attachment points of the YZ-latches, which could result in unrestrained cargo causing damage to the fire protection system, hydraulic system, electrical wiring, or other equipment located in the forward and aft cargo compartments. This damage could adversely affect the continued safe flight of the airplane.
Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Airplanes
The FAA is revising an earlier NPRM for an airworthiness directive (AD) that applies to certain Fokker Model F.28 Mark 0070 and 0100 airplanes. The original NPRM would have superseded an existing AD that currently requires a one-time inspection of the sliding members in the main landing gear (MLG) for cracking and replacement of the sliding members with serviceable parts if necessary. The original NPRM proposed to require repetitive magnetic particle inspections of the sliding members of the MLG for cracking and corrective actions as necessary. The original NPRM resulted from inspection findings that have shown repetitive inspections are needed to establish fleet safety. This new action revises the original NPRM by correcting a certain part number in the applicability. We are proposing this supplemental NPRM to detect and correct fatigue cracking of the sliding member, which could result in possible separation of the MLG from the airplane and consequent reduced controllability of the airplane upon landing and possible injury to passengers.
Airworthiness Directives; Bombardier Model CL-600-2B16 (CL-604) Airplanes and Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
The FAA is revising an earlier NPRM for an airworthiness directive (AD) that applies to certain Bombardier Model CL-600-2B16 (CL-604) airplanes and Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. These models may be referred to by their marketing designations as RJ100, RJ200, RJ440, CRJ100, CRJ200, CRJ440, and CL-65. The original NPRM would have superseded an existing AD that currently requires revising the Emergency Procedures section of the airplane flight manual (AFM) to advise the flightcrew of additional procedures to follow in the event of stabilizer trim runaway. The existing AD also requires revising the Abnormal Procedures section of the AFM to advise the flightcrew of procedures to follow in the event of MACH TRIM, STAB TRIM, and horizontal stabilizer trim malfunctions. The existing AD also requires revising the Normal section of the AFM to require a review of the location of certain circuit breakers and a functional check of the stabilizer trim system. In addition, the existing AD requires installing circuit breaker identification collars and provides an optional terminating action for the requirements of the AD. The original NPRM proposed to require doing the previously optional terminating action (installation of a new horizontal stabilizer trim control unit). The original NPRM resulted from a determination that the terminating action is necessary to address reports of uncommanded horizontal stabilizer trim motion. This new action revises the original NPRM by not allowing the removal of applicable temporary revisions (TRs) to the Emergency and Abnormal Procedures sections of the AFM and by adding the proposed requirement for certain airplanes to re-insert the applicable TRs of the Emergency and Abnormal Procedures sections of the AFM under certain conditions. We are proposing this supplemental NPRM to prevent horizontal stabilizer trim uncommanded motion, which could result in reduced controllability of the airplane.
Standard Instrument Approach Procedures; Miscellaneous Amendments
This amendment amends Standard Instrument Approach Procedures (SIAPs) for operations at certain airports. These regulatory actions are needed because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addition of new obstacles, or changes in air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Modification of Class E Airspace; Creston, IA
This action amends Title 14 Code of Federal Regulations, part 71 (14 CFR 71) by modifying the Class E airspace area at Creston Municipal Airport, IA. An examination of controlled airspace for Creston, IA, revealed discrepancies in the legal description for the Class E airspace area. The intended effect of this rule is to provide controlled airspace of appropriate dimensions to protect aircraft executing Standard Instrument Approach Procedures (SIAP) to Creston Municipal Airport.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB- 135BJ airplanes. This proposed AD would require modifying the forward and aft auxiliary fuel tanks. This proposed AD results from a report of sparks due to chafing between the harnesses of the forward and aft auxiliary fuel tanks, between certain harnesses attached to the aircraft structure, or between certain harnesses attached to certain mechanical components. We are proposing this AD to prevent a potential ignition source inside a fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion.
Airworthiness Directives; Airbus Model A330 and A340 Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Model A330 and A340 airplanes. This proposed AD would require revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness by incorporating new and revised certification maintenance requirements (CMRs). This proposed AD results from the manufacturer's determination that additional and revised CMRs are necessary in order to ensure continued operational safety of the affected airplanes. We are proposing this AD to prevent safety-significant latent failures that would, in combination with one or more other specific failures or events, result in a hazardous or catastrophic failure condition.
Airworthiness Directives; Fokker Model F27 Mark 100, 200, 300, 400, 500, 600, and 700 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Fokker Model F27 Mark 100, 200, 300, 400, 500, 600, and 700 airplanes. This AD requires revising the Limitations section of the airplane flight manual regarding the use of continuous ignition, fuel filter heating, and resetting circuit breakers during flight in certain conditions such as icing. This AD results from reports of power loss on one or both engines in icing conditions. We are issuing this AD to advise the flightcrew that continuous ignition will not reduce the probability of power loss, and what action they must take to avoid this hazard. Loss of power in one or more engines during flight, if not prevented, could result in loss of control of the airplane.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-145XR Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain EMBRAER Model EMB-145XR airplanes. This AD requires replacement of certain segments of the passenger seat tracks with new, improved seat tracks. This AD results from instances where the shear plungers of the passenger seat legs were not adequately fastened. We are issuing this AD to prevent inadequate fastening of the seat leg shear plungers, which could result in failure of the passenger seat tracks during emergency landing conditions and consequent injury to passengers.
Airworthiness Directives; Boeing Model 777-200 and -300 Series Airplanes Equipped with Rolls-Royce Engines
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 777-200 and -300 series airplanes equipped with Rolls-Royce engines. This AD requires repetitive inspections to detect cracks of the outer V-blades of the thrust reverser, and corrective action if necessary. This AD also provides for optional terminating action for the repetitive inspections. This AD results from reports of cracked outer V-blades in the thrust reversers. We are issuing this AD to prevent separation of a thrust reverser from the airplane during normal reverse thrust or during a refused takeoff, which could result in impact damage to other airplane areas. If a thrust reverser separates from the airplane during a refused takeoff, the engine could produce forward thrust, resulting in unexpected thrust asymmetry and a possible runway excursion.
Standard Instrument Approach Procedures, Weather Takeoff Minimums; Miscellaneous Amendments
This amendment establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and/or Weather Takeoff Minimums for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addition of new obstacles, or changes in air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Operating Limitations at New York LaGuardia Airport; Notice of Order
On September 11, 2006, the FAA issued a proposed order, which requested written views on the FAA's tentative determination to place temporary limitations on flight operations at New York's LaGuardia Airport (LaGuardia). The temporary limits are intended to prevent the congestion-related delays that would otherwise occur during the interval between the expiration of the High Density Rule and the effective date of a long-term regulation. In response to comments, the FAA is issuing a final order (the Order) that adopts the proposed limitations with some modifications. The limitations will permit 75 scheduled and six unscheduled operations per hour between 6 a.m. through 9:59 p.m., Eastern time, Monday through Friday and from 12 noon through 9:59 p.m., Eastern Time, on Sundays.
Eighth Meeting, RTCA Special Committee 204: 406 MHz Emergency Locator Transmitters
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 204: 406 MHz Emergency Locator Transmitters.
RTCA Special Committee 159: Global Positioning System (GPS)
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 159: Global Positioning System.
Second Meeting, Special Committee 212, Helicopter Terrain Awareness and Warning System (HTWAS)
The FAA is issuing this notice to advise the public of RTCA Special Committee 212, Helicopter Terrain Awareness and Warning System (HTWAS).
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This proposed AD would require repetitive inspections of the bolts that attach the exhaust nozzle to the aft engine flange to determine if any bolts are missing or fractured, and replacement of the existing bolts with new, improved bolts. This proposed AD results from reports of the engine exhaust nozzle and fairing departing from the airplane in flight due to missing attachment bolts. We are proposing this AD to detect and correct missing or fractured attachment bolts, which could lead to the loss of an engine exhaust nozzle during flight and consequent structural damage to the airplane and hazard to people or property on the ground. Damage to the airplane could cause the airplane to yaw and result in reduced controllability of the airplane.
Airworthiness Directives; EADS SOCATA Model TBM 700 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as two fatigue failures of flap carriage rollpins occurred on in-service airplanes. The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.
Airworthiness Directives; Alpha Aviation Design Limited (Type Certificate No. A48EU formerly held by APEX Aircraft and AVIONS PIERRE ROBIN), Model R2160 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Alpha Aviation Model R2160 airplanes. This AD requires you to inspect the fuel pressure indication system for leakage at the end of the adapter in the fuel pressure indication system. This AD results from the possibility of fuel leakage at the end of the adapter in the fuel pressure indication system. We are issuing this AD to detect, correct, and prevent fuel leaks in the fuel pressure indicating system. This failure could allow fuel to leak near the exhaust manifold and lead to a fire.
Airworthiness Directives; EADS SOCATA Model TBM 700 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks found on several main landing gear cylinders. The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.
Airworthiness Directives; B-N Group Ltd. BN-2, BN-2A, BN-2B, BN-2T, and BN-2T-4R Series (All Individual Models Included in Type Certificate Data Sheet (TCDS) A17EU, Revision 16, Dated December 9, 2002), and BN-2A-Mklll Trislander Series (All Individual Models Included in Type Certificate Data Sheet (TCDS) A29EU, Revision 4, Dated December 9, 2002) Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: ``incidences have been reported to Britten-Norman Aircraft Ltd where cracks have been found in the inner shell of the pitot/static pressure heads. This could result in incorrect readings on the pressure instrumentation, e.g. altimeters, vertical speed indicators (rate-of-climb) and airspeed indicators.'' The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.
Proposed Establishment of Class E5 Airspace; Potosi, MO
This notice proposes to amend Part 71 of the Federal Aviation Regulations (14 CFR Part 71) by establishing a Class E airspace area extending upward from 700 feet above the surface at Potosi, Washington County Airport, MO.
IFR Altitudes; Miscellaneous Amendments
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Airworthiness Directives; Stemme GmbH & Co. KG Model S10, S10-V, and S10-VT Gliders
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Raytheon Aircraft Company Models C90A, B200, B200C, B300, and B300C Airplanes
This document makes a correction to Airworthiness Directive (AD) 2006-23-02, which was published in the Federal Register on November 8, 2006 (71 FR 65390), and applies to certain Raytheon Aircraft Company (RAC) (formerly Beech) Models C90A, B200, B200C, B300, and B300C airplanes. AD 2006-23-02 requires you to inspect the flight controls for improper assembly or damage, and if any improperly assembled or damaged flight controls are found, take corrective action. We proposed in the notice of proposed rulemaking (NPRM) ``unless already done'' credit if the actions were already accomplished. However, we inadvertently left that language out of paragraph (e) of AD 2006-23-02. This document corrects that paragraph by inserting the phrase ``unless already done.''
Establishment of Restricted Area 5601F; Fort Sill, OK
This action establishes Restricted Area 5601F (R-5601F) over Fort Sill, OK. The United States (U.S.) Army requested that the FAA take action to establish R-5601F to provide additional airspace needed to support new high angle air-to-ground training requirements for Air Force, Navy, and Marine aircraft operating over the Falcon Bombing Range and to enhance Fort Sill's ability to host joint training.
Production and Airworthiness Approvals; Extension of Comment Period
This action extends by 30 days the comment period for an NPRM that was published on October 5, 2006. In that document, the FAA proposed changes to its certification procedures and identification requirements for aeronautical products and parts. This extension is a result of requests from the Aeronautical Repair Station Association, the Aerospace Industries Association, and the General Aviation Manufacturers Association.
Aviation Rulemaking Advisory Committee; Transport Airplane and Engine Issue Area-New Task
Notice is given of a new task assignment for the Aviation Rulemaking Advisory Committee (ARAC). This notice is to inform the public of this ARAC activity and solicit membership to a new Propeller Harmonization Working Group to support ARAC in developing advice and recommendations on this new task.
Noise-Exposure Map Notice: Receipt of Noise-Compatibility Program and Request for Review for Portland International Airport, Portland, OR
The Federal Aviation Administration (FAA) announces its determination that the noise-exposure maps (NEM) submitted by the Director of Aviation for Portland International Airport under the provisions of 49 U.S.C. 47501 et seq. (Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements. The FAA also announces that it is reviewing a proposed noise-compatibility program that was submitted for Portland International Airport under Part 150, in conjunction with the noise- exposure map, and that this program will be approved or disapproved on or before June 15, 2007.
Revision of the Cancellation of Preparation of Environmental Impact Statement (EIS) for Ontario International Airport, Ontario, San Bernardino County, CA
On December 1, 2006, the FAA terminated preparation of the EIS at Ontario International Airport (ONT) since there are no proposed projects ripe for review. Los Angeles World Airports, the airport owner, will continue to prepare a master plan for ONT.
Military Airport Program (MAP) Application; Extension of Application Deadline
The Federal Aviation Administration (FAA) is extending to January 19, 2007, the date to submit an application for the MAP. The original notice, Notice of Opportunity to Participate, criteria requirements and application procedure for participation in the MAP appeared in the Federal Register on October 16, 2006 (71 FR 60791). In that Notice of Opportunity to Participate, FAA requested applications be received on or before November 27, 2006. The agency is taking this action in response to requests for an application deadline extension to allow interested persons additional time to submit applications.
Notice of a Proposed Change in Monitor Status of Air Navigational Aids
The Federal Aviation Administration is requesting public comment on a proposal to change the monitor status of select air navigational aids (NAVAIDS) at airports in the United States. The FAA is proposing that certain Instrument Landing Systems (ILS), Localizer Type Directional Aids (LDA), Microwave Landing Systems (MLS), and Non- Directional Beacons (NDB) become unmonitored. The ILS NAVAIDS at the following airports are proposed to become unmonitored during the times that the control tower is closed. The associated ILS approaches for these airports are either not authorized for alternate airport filing purposes when the control tower is closed or the airport activity is low when the control tower is closed: (1) Florence, South Carolina (FLO), ILS, Runway 9. (2) Joplin, Missouri (JLN), ILS, Runways 13 and 18. (3) Macon, Georgia (MCN), ILS, Runway 5. (4) Manhattan, Kansas (MHK), ILS, Runway 3. (5) Mobile, Alabama (MOB), ILS, Runways 14 and 32. (6) Missoula, Montana (MSO), ILS, Runway 11. (7) North Myrtle Beach, South Carolina (CRE), ILS, Runway 23. (8) Savannah, Georgia (SAV), ILS, Runways 9 and 36. (9) Tallahassee, Florida (TLH), ILS, Runway 36. (Tallahassee ILS, Runway 27 will not be affected because of its ILS Category II status.) (10) Walla Walla, Washington (ALW), ILS, Runway 20. The following ILS NAVAIDS are proposed to become unmonitored due to low annual activity at the associated airport: 1) Bemidji, Minnesota (BJI) ILS, Runway 31. (2) Huron, South Dakota (HON), ILS, Runway 12. (3) Hoquiam, Washington (HQM), ILS, Runway 24. (4) International Falls, Minnesota (INL), ILS, Runway 31. (5) Liberal, Kansas (LBL), ILS, Runway 35. (6) Muscle Shoals, Alabama (MSL), ILS, Runway 29. (7) Norfolk, Nebraska (OFK), ILS, Runway 1. The following NAVAIDS associated with non-precision approaches are proposed to become unmonitored: (1) Charles City, Iowa (CCY), ILS Localizer, Runway 12. (2) Conrad, Montana (SO1), Conrad (CRD) NDB. (3) Elkins, West Virginia (EKN), LDA/ DME. (4) Elko, Nevada (EKO), LDA/DME, Runway 23. (5) Miles City, Montana (MLS), Horton (HTN) NDB. (6) Mountain Home Municipal, Idaho (U76), Sturgeon (STI) NDB. (7) Ontario, Oregon (ONO), Ontario (ONO) NDB. (8) Pullman/Moscow ID, Washington (PUW), MLS. (9) Rawlins, Wyoming (RWL), Sinclair (SIR) NDB. (10) Wenatchee, Washington (EAT), MLS.
Airworthiness Directives; Turbomeca S.A. Makila 1A and 1A1 Turboshaft Engines
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Revision of Class E Airspace; St. Michael, AK
This action revises Class E airspace at St. Michael, AK to provide adequate controlled airspace to contain aircraft executing one amended Standard Instrument Approach Procedure (SIAP). This rule results in the revision of Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at St. Michael, AK.
Revision of Class E Airspace; Kodiak, AK
This action revises Class E airspace at Kodiak, AK to provide adequate controlled airspace to contain aircraft executing Standard Instrument Approach Procedures (SIAPs). The FAA Instrument Flight Procedures Production and Maintenance Branch had noticed that a section of airspace north of Kodiak, AK, needed to be converted to controlled airspace. This rule addresses this issue and results in the revision of Class E airspace upward from 3,500 feet (ft.) above the surface at Kodiak, AK.
Revision of Class E Airspace; Homer, AK
This action revises Class E airspace at Homer, AK to provide adequate controlled airspace to contain aircraft executing four new Standard Instrument Approach Procedures (SIAPs). This rule results in the revision of Class E airspace upward from the surface, from 700 feet (ft.), and from 1,200 ft. above the surface at Homer, AK.
Revision of Class E Airspace; Perryville, AK
This action revises Class E airspace at Perryville, AK to provide adequate controlled airspace to contain aircraft executing a new Standard Instrument Approach Procedure (SIAP) and a new Stardard Instrument Departure procedure (SID). This rule results in the revision of Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Perryville, AK.
Revision of Class E Airspace; Hooper Bay, AK
This action revises Class E airspace at Hooper Bay, AK to provide adequate controlled airspace to contain aircraft executing two new Standard Instrument Approach Procedures (SIAPs). This rule results in the revision of Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Hooper Bay, AK.
Revision of Class E Airspace; Tok Junction, AK
This action revises Class E airspace at Tok Junction, AK to provide adequate controlled airspace to contain aircraft executing a new Standard Instrument Approach Procedure (SIAP). This rule results in the revision of Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Tok Junction, AK.
Airworthiness Directives; CFM International, S.A. CFM56 Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for certain CFM International CFM56 Series turbofan engines. This AD requires replacing certain fuel filters manufactured under parts manufacturer approvals (PMA). This AD results from 12 reports of failed fuel filters. We are issuing this AD to prevent the loss of engine thrust that could result in loss of control during takeoff or landing.
Airworthiness Directives; Rolls-Royce Corporation 501-D Series Turboprop Engines
The FAA is superseding an existing airworthiness directive (AD) for Rolls-Royce Corporation (RRC) 501-D series turboprop engines. That AD requires removal from service of certain turbine rotor components at reduced life limits. This AD requires the same actions but adds two new life limits. This AD results from RRC reevaluating and revising component life limits for 501-D22 series turboprop engines. We are issuing this AD to prevent uncontained turbine rotor failure resulting in an in-flight engine shutdown and possible damage to the airplane.
Proposed Revision of Class E Airspace; Red Dog, AK
This action proposes to revise Class E airspace at Red Dog, AK. Two new Area Navigation (RNAV) Required Navigation Performance (RNP) Special Instrument Approach Procedures (SIAPs) and an RNAV RNP Special Departure Procedure (DP) are being developed for the Red Dog Airport. Adoption of this proposal would result in revision of existing Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Red Dog Airport, AK.
Airworthiness Directives; Microturbo Saphir 20 Models 095 Auxiliary Power Units (APU)
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Petitions for Exemption; Summary of Petitions Received
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption, part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of a certain petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Noise Exposure Map Notice: Receipt of Noise Compatibility Program and Request for Review
The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by Saint Louis County for Spirit of St. Louis Airport under the provisions of 49 U.S.C. 47501 et. seq (Aviation Safety and Noise Abatement Act) and 14 CFR Part 150 are in compliance with applicable requirements. The FAA also announces that it is reviewing a proposed noise compatibility program that was submitted for Spirit of St. Louis Airport under Part 150 in conjunction with the noise exposure map, and that this program will be approved or disapproved on or before June 10, 2007
Approval of Noise Compatibility Program for McClellan Palomar Airport, Carlsbad, CA
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program submitted by San Diego County, California under the provisions of Title I of the Aviation Safety and Noise Abatement Act, as amended, (Public Law96-193) (hereinafter referred to as ``the Act'') and 14 CFR Part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). On April 26, 2005, the FAA determined that the noise exposure maps submitted by San Diego County under Part 150 were in compliance with applicable requirements.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
