Department of Transportation March 2022 – Federal Register Recent Federal Regulation Documents

This action proposes to establish United States Area Navigation (RNAV) route T-380 in the vicinity of Emmonak, AK in support of a large and comprehensive T-route modernization project for the state of Alaska.

The FAA proposes to adopt a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes. This proposed AD was prompted by reports of broken P- clamps on the pressure relief line and the motive flow line in the fuel tanks, and a subsequent determination that certain service information lacked instructions for maintaining appropriate clearance between certain fuel tubes and their support brackets, and may also have led to incorrect installation of certain TeflonTM sleeves. This proposed AD was also prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require inspecting the motive flow line, vent line, and related parts, and adding support or additional clearance if necessary. This proposed AD would also require inspection, and replacement or relocation if necessary, of affected TeflonTM sleeves on the vent line, and installation of TeflonTM sleeves on the vent line at additional wing stations. This proposed AD would also require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.

These special conditions are issued for the Dassault Aviation (Dassault) Model Falcon 6X airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is an overspeed protection system in the normal mode, designed to prevent the pilot from inadvertently or intentionally exceeding certain airplane speeds. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. This special conditions document contains the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes to amend United States Area Navigation (RNAV) route T-242 in the vicinity of Utqiagvik, AK in support of a large and comprehensive T-route modernization project for the state of Alaska.

In compliance with the Paperwork Reduction Act of 1995 (PRA), this notice announces that the Information Collection Request (ICR) abstracted below will be submitted to the Office of Management and Budget (OMB) for review and approval. The ICR describes the nature of the information collection and its expected burden. This document describes a new collection of information for which NHTSA intends to seek OMB approval on Fatal Crash Seat Belt Use Reporting and Awareness, a one-time voluntary experiment to understand whether the inclusion of seat belt status in a fatal crash news report could affect seat belt use. A Federal Register notice with a 60-day comment period soliciting comments on the following information collection was published on September 28, 2021. No comments were received.

This action proposes to amend Class E airspace extending upward from 700 feet above the surface at Stephen A. Bean Municipal Airport, Rangeley, ME, due to the decommissioning of the Rangeley non- directional beacon (NDB) and cancellation of associated approaches, as well as updating the airport's name and geographic coordinates. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.

FMCSA announces its decision to exempt 12 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) to operate a commercial motor vehicle (CMV) in interstate commerce. They are unable to meet the vision requirement in one eye for various reasons. The exemptions enable these individuals to operate CMVs in interstate commerce without meeting the vision requirement in one eye.

These special conditions are issued for the Dassault Aviation (Dassault) Model Falcon 6X airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This airplane is equipped with an electronic flight-control system that includes pilot controls through a side stick instead of through a conventional wheel or control stick. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes to establish Class D airspace at Chicago/ Romeoville, IL. The FAA is proposing this action to support the establishment of an air traffic control tower at Lewis University Airport, Chicago/Romeoville, IL.

The FAA proposes to adopt a new airworthiness directive (AD) for all Alexander Schleicher GmbH & Co. Segelflugzeugbau Model ASW-15 gliders. This proposed AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as wing root damage. This proposed AD would require repetitively inspecting the wing root ribs for cracks, looseness, and damage and replacing any root rib with a crack, a loose rib or lift pin bushing, or any damage. The FAA is proposing this AD to address the unsafe condition on these products.

The FHWA, on behalf of Caltrans, is issuing this notice to announce actions taken by Caltrans that are final. The actions relate to a proposed roadway project, the I-10 Bypass: Banning to Cabazon Project from the intersection of Hathaway Street and Westward Avenue in the City of Banning to the intersection of Bonita Avenue and Apache Trail in the unincorporated community of Cabazon, for approximately 3.3 miles of new roadway in the County of Riverside, State of California. Those actions grant approvals for the project.

This notice announces actions taken by FHWA and other Federal agencies that are final. These final agency actions relate to a proposed highway project, I-375, from I-75 South of Mack Avenue to the Detroit Riverfront in the city of Detroit, Wayne County, State of Michigan. The actions issue National Environmental Policy Act (NEPA) and Section 4(f) of the U.S. Department of Transportation Act of 1966 (Section 4(f)) decisions relating to the I-375 improvement project. FHWA's Finding of No Significant Impact (FONSI) provides details on the Selected Alternative for proposed improvements.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Viking Air Limited (type certificate previously held by Bombardier Inc. and de Havilland, Inc.) Model DHC-6-1, DHC-6-100, DHC- 6-200, DHC-6-300, and DHC-6-400 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as binding of the rod end bearing connecting the lower fuel control unit (FCU) push rod assembly to the FCU power lever. This proposed AD would require performing tests, inspections, and lubrication of the FCU push rod assemblies, and replacing them with improved parts as necessary. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA is correcting a final rule that appeared in the Federal Register on March 3, 2022. The rule modified the Class D and Class E surface airspace, established Class E airspace designated as an extension to Class D & E surface areas, Class E airspace beginning at 700 feet above the surface, removed navigational aids (NAVAIDs) from text headers, and made administrative changes to the legal descriptions at Southwest Oregon Regional Airport, North Bend, OR. The Final Rule did not explain the purposeful removal of Class E airspace beginning at 1,200 feet above the surface, nor did it properly exclude the Sunnyhill Airport cut-out. This action adds verbiage explaining the removal of Class E airspace beginning at 1,200 feet above the surface, and corrects the legal description for the newly established Class E airspace designated as an extension to Class D & E surface areas to properly exclude Sunnyhill Airport, OR.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Leonardo S.p.a. Model A109S and AW109SP helicopters. This proposed AD was prompted by a report of a protective sheath, installed around a fixed flight control rod, which should have been removed during assembly. This proposed AD would require borescope inspecting certain parts, and removing any foreign object if detected, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the extension of a currently approved information collection: Public Transportation Agency Safety Plan.

The FAA is superseding Airworthiness Directive (AD) 2022-05- 09, which applied to certain MARS A.S. emergency parachutes. AD 2022- 05-09 required removing emergency parachutes with certain manufacture dates or serial numbers from service. Since the FAA issued AD 2022-05- 09, the European Union Aviation Safety Agency (EASA) superseded its mandatory continuing airworthiness information (MCAI) to correct an unsafe condition on this aviation product. The MCAI identifies the unsafe condition as the length of the ripcord between the pins being too long, which could cause a malfunction of the emergency parachute. This AD retains the actions required by AD 2022-05-09 and expands the applicability.

The Department of Transportation (DOT) invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a previously approved information collection. These forms include Application for Federal Assistance (SF-424), Federal Financial Report (SF-425), Request for Advance or Reimbursement (SF- 270) and Outlay Report and Request for Reimbursement for Construction Programs (SF-271). We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AB139 and AW139 helicopters. This proposed AD was prompted by a large crack detected on the tail gearbox (TGB) fitting during a scheduled inspection and the determination that certain TGB fittings are required to be inspected by the use of a borescope. This proposed AD would require a one-time borescope inspection of certain part-numbered TGB fittings, and depending on the inspection results, removing the affected part from service and replacing with an airworthy part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for certain CFM International, S.A. (CFM) LEAP-1A model turbofan engines. This proposed AD was prompted by reports of two in-flight shutdowns (IFSDs) and subsequent investigation by the manufacturer that revealed cracks in the high-pressure turbine (HPT) rotor stage 1 blades. This proposed AD would require initial and repetitive borescope inspections (BSIs) of the HPT rotor stage 1 blades and HPT stator stage 1 nozzle set. Depending on the results of the BSIs, this proposed AD would require either additional BSIs at reduced intervals or replacement of the HPT rotor stage 1 blades or HPT stator stage 1 nozzle set. This proposed AD would also require sending the inspection results to CFM if any unserviceable finding is found. The FAA is proposing this AD to address the unsafe condition on these products.

This action proposes to amend United States Area Navigation (RNAV) route T-228 in the vicinity of Cape Newenham, AK in support of a large and comprehensive T-route modernization project for the state of Alaska.

The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777 airplanes. This proposed AD was prompted by reports of discrepancies between the center wing tank (CWT) fuel quantity, as indicated by the fuel quantity indicating system (FQIS), and the refueling truck uploaded fuel amount, followed by certain engine-indicating and crew-alerting system (EICAS) messages. This proposed AD would require installing new software in the fuel quantity processor unit (FQPU), or replacing the FQPU with one that includes new software, depending on airplane configuration; and doing a software version check and FQPU operational check. This proposed AD would also prohibit the installation of certain FQPUs on certain airplanes. The FAA is proposing this AD to address the unsafe condition on these products.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to issue coastwise endorsement eligibility determinations for foreign-built vessels which will carry no more than twelve passengers for hire. A request for such a determination has been received by MARAD. By this notice, MARAD seeks comments from interested parties as to any effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. Information about the requestor's vessel, including a brief description of the proposed service, is listed below.