Department of Transportation August 2021 – Federal Register Recent Federal Regulation Documents

Diversified Vehicle Services, Inc. (DVS or Petitioner) has petitioned NHTSA for a decision that model year (MY) 2014-2018 Chevrolet Cheyenne Trucks (TKs), which were not originally manufactured to comply with all applicable Federal motor vehicle safety standards (FMVSS), are eligible for importation into the United States. In its petition, DVS claims that these vehicles are eligible for import because they are substantially similar to Chevrolet Silverado TKs originally manufactured for sale in the United States and certified by their manufacturer as complying with all applicable FMVSS, and because they are capable of being readily altered to conform to the standards. This document announces the denial of DVS's petition.

Harbor Freight Tools (HFT) has determined that certain Kenway 12V Magnetic Towing Light Kits and Submersible LED Trailer Lights manufactured by Jinhua Eagle King Tools Co., Ltd. do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 108, Lamps, Reflective Devices, and Associated Equipment. HFT filed a noncompliance report dated October 26, 2020, and subsequently petitioned NHTSA on November 23, 2020, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This notice announces receipt of HFT's petition.

The FHWA is re-designating the PHFS to meet the statutory requirements of the authorizing law. The Fixing America's Surface Transportation (FAST) Act designated the PHFS and provided for an update to the PHFS every 5 years. Beginning five years after the date of the enactment of the FAST Act, and every 5 years thereafter, using the designation factors described in FAST Act, the FHWA Administrator shall re-designate the primary highway freight system. Each re- designation may increase the mileage on the PHFS by not more than 3 percent of the total mileage of the system. The current PHFS consists of 41,518 centerline miles of roadway and is a component of the National Highway Freight Network (NHFN). The re-designation initiated through this RFI may add up to 1,246 miles of additional mileage to the current PHFS. State Freight Advisory Committees, represented by their States, are invited to submit comments. Other entities are encouraged to engage directly with their State Freight Advisory Committee or the State department of transportation (State DOT). Comments submitted by entities other than a State Freight Advisory Committee will be considered for general input into the process.

FMCSA announces its decision to renew exemptions for 102 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these individuals to continue to operate CMVs in interstate commerce without meeting the vision requirements in one eye.

PHMSA is publishing this notice to solicit public comments on a request for special permit received from the Sabal Trail Transmission, LLC (STT). The special permit request is seeking relief from compliance with certain requirements in the federal pipeline safety regulations. At the conclusion of the 30-day comment period, PHMSA will review the comments received from this notice as part of its evaluation to grant or deny the special permit request.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Leonardo S.p.a. Model A109E helicopters. This proposed AD was prompted by reports of cracking in the center fuselage frame assembly in the intersection of the lateral pylon and floor spar at station (STA) 1815 on the left- and right-hand sides. This proposed AD would require repetitive inspections of the intersection of the lateral pylon and floor spar at STA 1815 for cracking and, depending on the findings, repair, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Helicopters Model AS332L2 and EC225LP helicopters. This proposed AD was prompted by a design deficiency. This proposed AD would require modifying the hoist control power supply, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

In compliance with the Paperwork Reduction Act of 1995 (PRA), this notice announces that the Information Collection Request (ICR) abstracted below will be submitted to the Office of Management and Budget (OMB) for review and approval. The ICR describes the nature of the information collection and its expected burden. NHTSA is requesting an extension of its information collection to continue to collect and aggregate information from State-level reporting entities that can be used to measure the progress of 911 authorities across the country in upgrading and enhancing their existing operations. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on April 19, 2021. No comments were received.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD- 500-1A11 airplanes. This proposed AD was prompted by reports of loose or disconnected powerplant FIREX interconnection hoses. This proposed AD would require replacing certain existing FIREX hose assemblies with a newly designed FIREX hose assembly, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.

In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens.

The FAA is superseding Airworthiness Directive (AD) 2019-12-05 for certain CFM International S.A. (CFM) CFM56-5B, CFM56-5C, and CFM56- 7B model turbofan engines with a certain rotating air high-pressure turbine (HPT) front seal. AD 2019-12-05 required replacement of the affected rotating air HPT front seal with a part eligible for installation. This AD was prompted by cracks found in the rotating air HPT front seal. This AD requires replacement of affected rotating air HPT front seals installed on CFM CFM56-5B, CFM56-5C, and CFM56-7B model turbofan engines that have fewer cycles since being reconfigured than the engines affected by AD 2019-12-05. This AD also requires CFM56-5B or CFM56-7B model turbofan engines with a reconfigured rotating air HPT front seal that was previously operated in a CFM56-5C model turbofan engine to follow the removal requirements for the CFM56-5C model turbofan engine. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for certain General Electric Company (GE) CF34-10E model turbofan engines. This proposed AD was prompted by a manufacturer investigation that revealed Teflon material in the A-sump oil strainer (strainer assembly) screen after several reports of in-flight shutdowns (IFSDs) and unscheduled engine removals (UERs). This proposed AD would require initial and repetitive visual inspections of the strainer assembly screen. As a terminating action to the initial and repetitive visual inspections, this proposed AD would require the replacement of the stationary oil seal at the No. 1 forward bearing. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) 2018-19-28, which applies to certain Embraer S.A. Model ERJ 190-100 STD, -100 LR, -100 ECJ, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes; and AD 2014-16-16, which applies to all of those airplane models. AD 2014-16-16 requires, for certain airplanes, retorquing and replacing the pylon lower link fittings, and for all airplanes, repetitively retorquing those fittings. AD 2018-19-28 requires modifying the attaching parts of the pylon lower link fittings. Since the FAA issued AD 2014-16-16 and AD 2018-19-28, the FAA finds it necessary to change the compliance time for the modification. This proposed AD would require an inspection of certain shear pins, replacement if necessary, and revised compliance times for the modification, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain Airbus Defense and Space S.A. Model C-212-CB, C-212-CC, C-212- CD, C-212-CE, C-212-CF, C-212-DE, and C-212-DF airplanes. This AD was prompted by a report of cracks on the left-hand (LH) and right-hand (RH) side fuselage skin and on a certain frame underneath the skin, near the leading edge of the wing. This AD requires repetitive inspections of the LH and RH side center wing fairings at a certain frame, around the wing leading edge for discrepancies (cracks), and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) 2017-23-02, which applies to certain The Boeing Company Model 737-200, -200C, -300, -400, and -500 series airplanes. AD 2017-23-02 requires repetitive inspections, replacement, and applicable on-condition actions for certain fuselage crown skin panels. Since the FAA issued AD 2017-23-02, certain airplane configurations and inspection locations have been revised and additional airplanes have been determined to be subject to the unsafe condition. This proposed AD would retain the actions in AD 2017-23-02, revise certain airplane configurations and inspection locations, and add airplanes to the applicability. The FAA is proposing this AD to address the unsafe condition on these products.

This action reopens the comment period for the Safety Management System for Certificated Airports SNPRM published July 14, 2016. In the SNPRM, the FAA proposed to amend certain requirements included in the notice of proposed rulemaking published on October 7, 2010. Most notably, the FAA revised the proposed applicability of the rule so that a Safety Management System (SMS) is only required for a certificated airport classified as a small, medium, or large hub airport in the National Plan of Integrated Airport Systems; serving international air traffic; or having more than 100,000 total annual operations. The FAA also proposed changes that would extend the implementation period from 18 to 24 months; require submission of an implementation plan within 12 months instead of 6 months of the effective date of the final rule; modify the training requirements; ensure consistency among various FAA SMS initiatives, and reduce the implementation burden.

Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, FRA seeks approval of the Information Collection Request (ICR) abstracted below. Before submitting this ICR to the Office of Management and Budget (OMB) for approval, FRA is soliciting public comment on specific aspects of the activities identified in the ICR.

In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens.

This notice announces the availability of the FAA's Adoption of the Missile Defense Agency's Final Environmental Impact Statement for Long Range Discrimination Radar (LRDR) Operations, Clear Air Force Station, Alaska (CAFS), and Record of Decision for Federal Aviation Administration Actions to Accommodate Testing and Operation of the LRDR at CAFS under the Missile Defense Agency's Modified Operational Concept (``the Adoption/ROD''). The Adoption/ROD documents: (1) The FAA's adoption of the Missile Defense Agency's (MDA) Environmental Impact Statement (EIS) for Long Range Discrimination Radar (LRDR) Operations, Clear Air Force Station (CAFS), Alaska; and (2) the FAA's decision to establish additional restricted areas to protect aviation from high- intensity radiated fields (HIRF) generated during the LRDR testing and operation, implement temporary flight restrictions (TFR) until the restricted areas are in effect, and make changes to federal airways and instrument flight procedures to accommodate the new restricted areas.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Leonardo S.p.a. Model AW189 helicopters. This proposed AD was prompted by a report that a number of fairleads that support the engine combustion chamber D1 drain hose showed evidence of heat damage. This proposed AD would require modifying the helicopter by installing a certain engine combustion chamber D1 drain assembly, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for H[eacute]licopt[egrave]res Guimbal (HG) Model Cabri G2 helicopters. This proposed AD was prompted by the determination that certain parts need life limits and certification maintenance requirement (CMR) tasks. This proposed AD would require establishing life limits and CMR tasks for various parts and removing any parts from service that have reached or exceeded their life limits. Depending on the results of the CMR tasks, this proposed AD would require corrective action. The FAA is proposing this AD to address the unsafe condition on these products.

This document announces a fact-finding informal airspace meeting regarding a plan to amend the Class C Airspace at Chicago Midway International Airport, IL. The purpose of the meeting is to solicit aeronautical comments on the proposal's effects on local aviation operations. All comments received during the meeting, and the subsequent comment period, will be considered prior to the issuance of a notice of proposed rulemaking.