Department of Transportation November 2019 – Federal Register Recent Federal Regulation Documents

The Surface Transportation Project Delivery Program allows a State to assume FHWA's environmental responsibilities for review, consultation, and compliance for Federal highway projects. When a State assumes these Federal responsibilities, the State becomes solely responsible and liable for the responsibilities it has assumed, in lieu of FHWA. This program mandates annual audits during each of the first 4 years to ensure the State's compliance with program requirements. This notice makes available the final report of the Florida Department of Transportation's (FDOT) second audit under the program.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a new information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on August 22, 2019. The collection involves aircraft operators using pre- flight availability predictions for navigation and surveillance and submitting a request for an authorization from air traffic control (ATC) via a web-based tool and application process. The collected information is necessary to: (1) Predict whether an aircraft flying the proposed route of flight will have sufficient position accuracy and integrity for:

This notice is being given that the Federal Aviation Administration (FAA) is considering a request from the City of Augusta to waive the requirement that 0.13 acres of surplus property located at the Daniel Field Airport be used for aeronautical purposes. Currently, the ownership of the property provides for the protection of FAR Part 77 surfaces and compatible land use which would continue to be protected with deed restrictions required in the transfer of land ownership.

The FAA is adopting a new airworthiness directive (AD) for certain International Aero Engines, LLC (IAE LLC) PW1122G-JM, PW1124G- JM, PW1124G1-JM, PW1127G1-JM, PW1127GA-JM, PW1127G-JM, PW1129G-JM, PW1130G-JM, PW1133GA-JM, PW1133G-JM model turbofan engines. This AD requires replacement of certain low-pressure turbine (LPT) 3rd-stage blades. This AD was prompted by multiple reports of LPT 3rd-stage blade failures causing a reduction of engine thrust. The FAA is issuing this AD to address the unsafe condition on these products.

This notice announces action taken by FHWA and that are final. This final agency action relates to a proposed highway project, improvements to US 340, from the Charles Town Bypass in Jefferson County, West Virginia to just south of the state boundary in Clarke County, Virginia. This decision will be used by Federal agencies in subsequent proceedings, including decisions to grant licenses, permits, and approvals for the proposed highway project. The FHWA's Record of Decision (ROD) provides details on the Selected Alternative for the proposed improvements.

This action modifies the Class E airspace extending upward from 700 feet above the surface at Madera Municipal Airport, Madera, CA, eliminates references to the Clovis and Friant Very High Frequency Omni-Directional Range/Tactical Air Navigation Aids (VORTAC) from the Airspace description, and updates the airport's geographic coordinates to match the FAA's aeronautical database. In addition, this action updates the airspace lateral dimensions to meet current requirements. This action supports the operation of Instrument flight Rules (IFR) under standard instrument approach and departure procedures in the National Airspace System.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

The FHWA, on behalf of ODOT, is issuing this notice to announce actions taken by ODOT that are final. The actions relate to the proposed modification of United States Route 62 (US-62) in the County of Stark, State of Ohio. Those actions grant licenses, permits, and approvals for the project.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirements of the coastwise trade laws to allow the carriage of no more than twelve passengers for hire on vessels, which are three years old or more. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

Pursuant to a delegation of authority from the Secretary of Transportation, the Maritime Administrator is authorized to issue waivers allowing documented vessels with registry endorsements or foreign flag vessels to be used in operations that treat aquaculture fish or protect aquaculture fish from disease, parasitic infestation, or other threats to their health when suitable vessels of the United States are not available that could perform those services. A request for such a waiver has been received by the Maritime Administration (MARAD). This notice is being published to solicit comments intended to assist MARAD in determining whether suitable vessels of the United States are available that could perform the required services. If no suitable U.S.-flag vessels are available, the Maritime Administrator may issue a waiver in accordance with USCG regulations on Aquaculture. A brief description of the proposed aquaculture support service is listed in the SUPPLEMENTARY INFORMATION section below.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on August 16, 2019. The collection involves requesting that small on-demand operators voluntarily provide the number of revenue passengers that boarded their aircraft at each airport annually. This information is used in determining an airport's category and eligibility for federal funding on an annual basis. It is not available through any other federal data source.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a new information collection. The collection involves the establishment of a new grant program in the FAA for the Aircraft Pilots Workforce Development. The information to be collected will be used for selecting projects.

This document responds to petitions for reconsideration regarding NHTSA's October 2, 2019, final rule amending NHTSA's odometer disclosure requirements to allow States to adopt electronic odometer disclosure systems and changing the time when vehicles become exempt from federal odometer disclosure requirements from ten years to twenty years. NHTSA received petitions for reconsideration from the America Association of Motor Vehicle Administrators (AAMVA) and the State of Delaware Department of Transportation requesting that the agency delay the effective date of the changes to the exemption from odometer disclosure requirements for one year. After consideration of the petitions, NHTSA has decided to grant the petition. The change to the exemption from the odometer disclosure requirements will take effect on January 1, 2021 and will apply to model year 2011 and newer vehicles. The amendments in the October 2, 2019, final rule allowing States to adopt electronic odometer disclosure systems will still take effect as scheduled on December 31, 2019.

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by the results of a structural analysis, which identified that the upper frame fittings (UFFs) of the forward cargo door surrounding structure have a low fatigue life. This AD requires repetitive inspections of the forward cargo door UFFs and brackets for discrepancies and, depending on the findings, doing applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-400 series airplanes. This proposed AD was prompted by a report of a certain modification that causes interference with inspections that are intended to detect fatigue cracks. This proposed AD would require repetitive low frequency eddy current (LFEC) inspections of a certain fuselage upper skin lap splice for cracks, repetitive high frequency eddy current (HFEC) inspections of a certain fuselage upper skin lap splice for cracks, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.

This action establishes 2 new low altitude RNAV routes T-239 and T-258; and modifies 3 existing RNAV routes T-290, T-292, and T-294 in the southeastern United States. The action expands the availability of RNAV routing in support of transitioning the National Airspace System (NAS) from ground-based to satellite-based navigation.

This action amends the Class E airspace extending upward from 700 feet above the surface at Tomahawk Regional Airport, Tomahawk, WI. This action is due to an airspace review requested by the Airspace Policy Group. The geographic coordinates of the airport are also being updated to coincide with the FAA's aeronautical database.

The FAA is superseding Airworthiness Directive (AD) 2019-21-08 for Textron Aviation Inc. (Textron) Models E33, E33A, E33C, F33, G33, 35-C33, 35-C33A, K35, M35, N35, P35, S35, V35, V35A, 36, and certain Models F33A, F33C, V35B, and A36 airplanes. AD 2019-21-08 required inspecting the right aileron flight control cable end fittings (terminal attachment fittings) and replacing any damaged cable assembly. This AD retains all of the actions of AD 2019-21-08 but removes Models K35, M35, N35, and P35 from the applicability. This AD was prompted by a comment the FAA received that AD 2019-21-08 should not apply to Models K35, M35, N35, and P35 airplanes. The FAA is issuing this AD to address the unsafe condition on these products.

In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens.

In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens.

This notice announces a meeting of the NextGen Advisory Committee (NAC).

This document announces the National Highway Traffic Safety Administration (NHTSA) receipt of a petition for a decision that model year (MY) 2014 to 2018 Bentley GT Continental passenger cars (PCs) that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards (FMVSS), are eligible for importation into the United States because they are substantially similar to vehicles that were originally manufactured for sale in the United States and that were certified by their manufacturer as complying with the safety standards (the U.S.-certified version of the 2014 to 2018 Bentley GT Continental PCs) and are capable of being readily altered to conform to the standards.

The FAA is adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD was prompted by reports of lavatory waste bin fire extinguishers found depleted. This AD requires a one-time inspection of the installation of the waste bins for interference (the inspection also includes a weight check of the waste bin fire extinguisher and an inspection of the discharge tubes for damage), modification of affected waste bins, and replacement of affected fire extinguishers, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD also requires replacement of the fire extinguisher if any damaged discharge tube is found or the weight of the waste bin fire extinguisher is too low. The FAA is issuing this AD to address the unsafe condition on these products.