Department of Transportation 2014 – Federal Register Recent Federal Regulation Documents

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below regarding motorcycle helmet labels has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on March 25, 2014 (79 FR 16420). The docket number is NHTSA-2014-0031. No comments were received.

In accordance with National Environmental Policy Act of 1969, as amended (NEPA; 42 United States Code 4321 et seq.), Council on Environmental Quality NEPA implementing regulations (40 Code of Federal Regulations parts 1500 to 1508), and FAA Order 1050.1E, Change 1, Environmental Impacts: Policies and Procedures, the FAA is announcing the availability of the ROD for the SpaceX Texas Launch Site, Cameron County, Texas. The ROD provides the FAA's final environmental determination and approval to support the issuance of launch licenses and/or experimental permits that would allow Space Exploration Technologies Corp. (SpaceX) to launch the Falcon 9 and Falcon Heavy orbital vertical launch vehicles and a variety of reusable suborbital launch vehicles from a launch site on privately owned property in Cameron County, Texas, as proposed in the Final Environmental Impact Statement (EIS) published in May 2014. The ROD provides a description of the applicant's Proposed Action and reasonable alternatives, and identifies the FAA's preferred and the environmentally preferred alternative. It includes a discussion of environmental impacts associated with the Proposed Action in each resource area, as analyzed in the Final EIS. The ROD summarizes the mitigation and enforcement actions that would be made the subject of the terms and conditions of the launch licenses and/or experimental permits issued to SpaceX, as well as other conservation and enhancement measures described in the Final EIS and presented for consideration. The Final EIS, prepared by the FAA for the SpaceX Texas Launch Site, serves as the primary reference and basis for preparation of the ROD. The Final EIS documents the analysis of environmental consequences associated with the construction and operation of the SpaceX Texas Launch Site and the No Action Alternative. The FAA is the lead Federal agency responsible for preparation of the EIS and ROD. Cooperating agencies include the National Aeronautics and Space Administration, National Park Service (NPS), U.S. Army White Sands Missile Range, and U.S. Army Corps of Engineers (USACE). The EIS and ROD were prepared pursuant to the requirements of NEPA, the CEQ Regulations for Implementing the Procedural Provisions of NEPA, and FAA Order 1050.1E, Change 1, Environmental Impacts: Policies and Procedures. The FAA has posted the ROD on the FAA Web site at https:// www.faa.gov/about/officeorg/headquartersoffices/ast/environme ntal/ nepadocs/review/documentsprogress/spacextexaslaunchsite environmentalimpactstatement/.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The Board updates for 2014 the fees that the public must pay to file certain cases and pleadings with the Board. The update will increase 13 fees by $50 or less, decrease 39 fees by $100 or less, decrease 27 fees by more than $100, and keep the remaining 46 fees at their existing level. The Board also clarifies its fee-rounding regulation to reflect existing policy.

This notice announces an action taken by the United States Army Corps of Engineers (USACE) that is final within the meaning of 23 U.S.C. 139(l)(1). This final agency action relates to a proposed highway project, Bonner Bridge Replacement Project along NC 12, from Rodanthe to Bodie Island in Dare County, North Carolina. The FHWA's Record of Decision (ROD) identifies the Parallel Bridge Corridor Alternative as the selected alternative for Phase I of the Bonner Bridge Replacement Project with a Transportation Management Plan which outlines a decision-making process for future phases.

We are superseding Airworthiness Directive (AD) 2014-07-01, for certain The Boeing Company Model 747 airplanes. AD 2014-07-01 required repetitive inspections for cracking in certain bulkhead structure; inspections of certain fasteners and support frame modifications on certain airplanes; related investigative and corrective actions, if necessary; and an interim modification that would terminate certain repetitive inspections. This AD clarifies certain paragraph references and revises a compliance time. This AD was prompted by a determination that certain paragraph references are in error. We are issuing this AD to detect and correct fatigue cracking of the BS 2598 bulkhead structure, which could adversely affect the structural integrity of the bulkhead and the horizontal stabilizer support structure, and result in loss of controllability of the airplane.

We are adopting a new airworthiness directive (AD) for certain EADS CASA (Type Certificate Previously Held by Construcciones Aeronauticas, S.A.) Model CN-235-300 airplanes. This AD was prompted by reports of reduced thickness of the center fuselage lower skin panel. This AD requires a detailed inspection to determine the presence of panel thickness reduction; and repetitive nondestructive testing (NDT) inspections and repair if necessary. We are issuing this AD to detect and correct reduced thickness of lower panel joints, which could result in reduced fatigue and damage tolerant characteristics of the lower panel joint to the adjacent side panels and failure of the center fuselage lower skin panel, resulting in loss of control of the airplane.

We are adopting a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This AD was prompted by reports of failures of the right inner tank fuel pump. This AD requires repetitive functional tests of the circuit breakers for the fuel pump power supply, and replacement of certain circuit breakers. We are issuing this AD to detect and correct failure of the circuit breakers for the fuel pump power supply, which could result in a fuel pump overheating, leading to a fuel tank explosion.

We are adopting a new airworthiness directive (AD) for AHD Model EC135P1, P2, P2+, T1, T2, and T2+ helicopters. This AD requires repetitive visual inspections of the ring frame X9227 for a crack and, if there is a crack, replacing the ring frame before further flight. This AD is prompted by a fatigue crack in the ring frame. These actions are intended to detect a crack in the ring frame and prevent loss of the tail rotor and subsequent loss of control of the helicopter.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by a report of installation of incorrect wire support clamps within the bay area of the left and right environmental control systems (ECS) during production; the ECS bay area is a flammable fluid leakage zone. Use of incorrect wire support clamps that are not fully cushioned could allow electrical power wiring to come in contact with the exposed metal of the improper clamp, causing a short circuit and subsequent electrical arcing. This AD requires inspecting to identify the part number of the wire support clamp, and related investigative and corrective actions if necessary. We are issuing this AD to prevent electrical arcing and a potential ignition source, which, in combination with flammable fuel vapors, could result in a fuel tank explosion, and consequent loss of the airplane.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-300, -400, -500, -600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by a review of the tail strobe light installation, which revealed that the tail strobe light is not electrically bonded to primary structure of the airplane. This AD requires installing a new tail strobe light housing and a new disconnect bracket, and changing the wire bundles. This AD also requires, for certain airplanes, an inspection to determine if sealant is applied, and corrective actions if necessary. We are issuing this AD to prevent, in case of a direct lightning strike to the tail strobe light, damage to the operation of other critical airplane systems due to electromagnetic coupling and large transient voltages, and damage to the control mechanisms or surfaces due to a fire, which could result in loss of control of the airplane.

This action proposes to establish Class E airspace at Thomas, OK. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Thomas Muni Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on April 23, 2014 (Vol. 79, No. 78, 22757).

This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This notice provides the updated National Hazardous Materials Route Registry (NHMRR), which is a listing, as reported by State and Tribal Government routing officials, of all designated and restricted road and highway routes for highway route controlled quantities (HRCQ) of Class 7 (radioactive) materials (RAM) (HRCQ/RAM) and non-radioactive hazardous materials (NRHMs) transportation. This notice also provides the limitations for using these routes. FMCSA developed this listing based on information received from State and Tribal Government routing agencies as of January 31, 2014. FMCSA is presenting the updated information with a new route-ordering format and changes to the table structure intended to improve the NHMRR usability for commercial drivers who must transport hazardous materials (HM) in compliance with routing requirements. This notice also provides current information on State and Tribal Government routing agency contacts. This listing supersedes the NHMRR published on December 4, 2000, and FMCSA requests comment on the new route ordering approach, table structure and content, and other related specific route issues from the States of Alaska, California, Colorado, and Texas, and the District of Columbia.

In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. The FMCSA requests approval to revise an existing ICR titled, ``Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery,'' due to an increase in the annual cost to respondents. This ICR will allow for ongoing, collaborative and actionable communication between FMCSA and its customers and stakeholders. It will also allow feedback to contribute directly to the improvement of program management. On April 18, 2014, FMCSA published a Federal Register notice allowing for a 60- day comment period on this ICR. The agency received no comments in response to that notice.

We propose to adopt a new airworthiness directive (AD) for all Rolls-Royce plc (RR) RB211 Trent 875-17, 877-17, 884-17, 884B-17, 892- 17, 892B-17, and 895-17 turbofan engines. This proposed AD was prompted by failure of the intermediate pressure (IP) turbine disk drive arm on an RR RB211 Trent turbofan engine. This proposed AD would require modification of the engine by removing any electronic engine control (EEC) that incorporates EEC software standard prior to version B7.2 and installing an EEC eligible for installation. We are proposing this AD to prevent overspeed failure of the turbine blades or the IP turbine disk, which could lead to uncontained blade or disk release, damage to the engine, and damage to the airplane.

We are adopting a new airworthiness directive (AD) for certain Pratt & Whitney Canada Corp. (P&WC) PW120, PW121, PW121A, PW124B, PW127, PW127E, PW127F, PW127G, and PW127M turboprop engines. This AD requires removal of the O-ring seal from the fuel manifold fitting. This AD was prompted by reports of fuel leaks at the interface between the fuel manifold and the fuel nozzle that resulted in engine fire. We are issuing this AD to prevent in-flight fuel leakage, which could lead to engine fire, damage to the engine, and damage to the airplane.

This notice details the application requirements and procedures for obtaining funding for eligible intercity passenger rail grade crossing improvement projects, positive train control implementation projects, and Passenger Rail Corridor Investment Plan projects. The opportunities described in this notice are available under Catalog of Federal Domestic Assistance (CFDA) number 20.314, ``Railroad Development.''