Department of Transportation May 2, 2008 – Federal Register Recent Federal Regulation Documents
Results 1 - 26 of 26
Airworthiness Directives; Cessna Aircraft Company 172, 175, 180, 182, 185, 206, 207, 208, 210, and 303 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) 172, 175, 180, 182, 185, 206, 207, 208, 210, and 303 series airplanes. This AD requires you to inspect the alternate static air source selector valve to assure that the part number identification placard does not obstruct the alternate static air source selector valve port. If the part number identification placard obstructs the port, this AD requires you to remove the placard, assure that the port is unobstructed, and report to the FAA if obstruction is found. This AD results from reports of improper installation of the part number identification placard on the alternate static air source selector valve. The actions specified by this AD are intended to prevent erroneous indications from the altimeter, airspeed, and vertical speed indicators, which could cause the pilot to react to incorrect flight information and possibly result in loss of control.
Agency Information Collection Activities; Withdrawal of Notice for Emergency Approval of a New Information Collection: Commercial Vehicle Driver Survey: Truck Driver Hours of Service and Fatigue Management
The FMCSA published a notice in the Federal Register on March 21, 2008 (73 FR 15253), requesting an emergency approval of a proposed new information collection that would be used to analyze the impact of the new Hours-of-Service regulations on drivers and the effects of these regulations on driver fatigue. The new information collection would also acquire general demographic information regarding the commercial motor vehicle driving population. The FMCSA has determined that this information collection request will not be conducted at this time.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2008 0038 at https:// www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Public Law 105-383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.- flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2008 0037 at https:// www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Public Law 105-383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.- flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2008-0039 at https:// www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Public Law 105-383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.- flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2008-0040 at https:// www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Public Law 105-383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.- flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the Office of Management and Budget (OMB). Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatements of previously approved collections. This document describes one collection of information for which NHTSA intends to seek OMB approval.
Public Notice for a Change in Use of Aeronautical Property at Portland International Jetport, Portland, ME
The FAA is requesting public comment on the City of Portland, Maine's request to change a portion (1.16 acres) of Airport property from aeronautical use to non-aeronautical use. The property is located bordered by the Jetport Plaza Road, Western Avenue and the Jetport Plaza shopping mall. It is identified on the City of South Portland's Tax Map C-05 as Lot 44-16. Upon disposition a retail tire center will be constructed on the site. The property was acquired under FAAP Project No. 9-17-001508. The disposition of proceeds from the disposal of airport property will be in accordance with FAA's Policy and Procedures Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999.
Notice of Opportunity for Public Continent on Surplus Property Release at Mobile Downtown Airport, Mobile, AL
Under the provisions of Title 49, U.S.C. Section 47153(c), notice is being given that the FAA is considering a request from the Mobile Airport Authority to waive the requirement that a 46.75-acre parcel of surplus property, located at the Mobile Downtown Airport, be used for aeronautical purposes.
Airworthiness Directives; De Havilland Support Limited Model Beagle B.121 Series 1, 2, and 3 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model DHC-8-400, DHC-8-401, and DHC-8-402 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model DHC-8-102, DHC-8-103, DHC-8-106, DHC-8-201, DHC-8-202, DHC-8-301, DHC-8-311, and DHC-8-315 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus A318, A319, A320, and A321 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, and MD-10-10F Airplanes
We are adopting a new airworthiness directive (AD) for certain McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, and MD-10-10F airplanes. This AD requires repetitive inspections for the presence of stray nickel or chrome plating deposits on the air filler valve bore of certain main landing gear (MLG) shock strut cylinders, and if necessary, related investigative and corrective actions. Doing the corrective action terminates the repetitive inspections. This AD results from a report of a left MLG collapse during landing rollout. We are issuing this AD to detect and correct stray nickel and chrome plating deposits, corrosion, and cracking of the air filler valve bore on the MLG cylinder, which could result in landing gear failure, significant damage to the airplane, and injury to personnel.
Airworthiness Directives; Taylorcraft, Inc. Models A, B, and F Series Airplanes
The FAA adopts a new airworthiness directive (AD) for certain Taylorcraft, Inc. Models A, B, and F series airplanes. This AD requires you to inspect the wing strut attach fittings for corrosion or cracks and requires repair or replacement if corrosion or cracks are found. This AD results from data collected from an accident involving a Taylorcraft Model BF12-65 airplane. The wing separated from the airplane after the wing strut attach fitting failed due to corrosion. We are issuing this AD to detect and correct corrosion or cracks in the wing strut attach fittings, which could result in failure of the wing strut attach fittings and lead to wing separation and loss of control.
Airworthiness Directives; Boeing Model 737-300, -400, and -500 Series Airplanes
We are adopting a new airworthiness directive (AD) for all Boeing Model 737-300, -400, and -500 series airplanes. This AD requires revising the FAA-approved maintenance inspection program to include inspections that will give no less than the required damage tolerance rating for each structural significant item (SSI), doing repetitive inspections to detect cracks of all SSIs, and repairing cracked structure. This AD results from a report of incidents involving fatigue cracking in transport category airplanes that are approaching or have exceeded their design service objective. We are issuing this AD to maintain the continued structural integrity of the entire fleet of Model 737-300, -400, and -500 series airplanes.
Airworthiness Directives; Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
We are adopting a new airworthiness directive (AD) for all Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD requires repetitive inspections for any cracking of or damage to the left side and right side flight deck No. 2, No. 4, and No. 5 windows and corrective actions if necessary. This AD results from reports of in-flight departure and separation of the flight deck windows. We are issuing this AD to detect and correct cracking in the vinyl interlayer or damage to the structural inner glass panes of the flight deck No. 2, No. 4, and No. 5 windows, which could result in loss of a window and rapid loss of cabin pressure. Loss of cabin pressure could cause crew communication difficulties or crew incapacitation.
Airworthiness Directives; Boeing Model 737-600, -700, -700C, -800 and -900 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, -800 and -900 series airplanes. This AD requires inspecting ground blocks GD261 and GD264 for corrosion, measuring the electrical bond resistance between the ground blocks and the airplane structure, separating the ground wires for the fuel boost pump circuit between ground blocks GD261 and GD264, and doing corrective actions if necessary. This AD results from a report of random flashes of the six fuel pump low pressure lights and intermittent operation of the fuel boost pumps. We are issuing this AD to prevent the simultaneous malfunction of all six fuel boost pumps, which could cause the engines to operate on suction feed and potentially flame out.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This Rule establishes, amends, suspends, or revokes STANDARD Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 777-200, -300, and -300ER Series Airplanes
We are adopting a new airworthiness directive (AD) for all Boeing Model 777-200, -300, and -300ER series airplanes. This AD requires a one-time inspection to determine the material of the forward and aft gray water drain masts. For airplanes having composite gray water drain masts, this AD also requires installation of a bonding jumper between a ground and the clamp on the tube of the forward and aft gray water composite drain masts. This AD results from a report of charred insulation blankets and burned wires around the forward gray water composite drain mast found during an inspection of the forward cargo compartment on a Model 767-300F airplane. We are issuing this AD to prevent a fire near a composite drain mast and possible disruption of the electrical power system due to a lightning strike on a composite drain mast, which could result in the loss of several functions essential for safe flight.
Grants and Cooperative Agreements to State and Local Governments; Grants and Agreements with Institutions of Higher Education, Hospitals and Other Non-Profit Organizations
This proposal would amend Department of Transportation regulations on uniform administrative requirements for grants and agreements with institutions of higher education, hospitals and other non-profit organizations. Specifically, the DOT proposes to make requirements for these grants and agreements consistent with the uniform administrative requirements for grants and cooperative agreements to state and local governments. In addition, this proposal would update references to applicable cost principles for grants and cooperative agreements with state and local governments and for grants and other agreements with institutions of higher education, hospitals and other non-profit organizations that appear in current Department of Transportation regulations.
Department of Transportation Implementation of OMB Guidance on Nonprocurement Suspension and Debarment
The Department of Transportation (Department) is moving its regulations on nonprocurement suspension and debarment from their current location in title 49 of the Code of Federal Regulations (CFR) to title 2 of the CFR. By issuing this final rule and moving its nonprocurement suspension and debarment regulations to new CFR part 1200 in title 2 thereof, the Department is also adopting the interim and final government-wide guidance on nonprocurement suspension and debarment issued by the Office of Management and Budget (OMB) in the Federal Register on August 31, 2005 (70 FR 51863) and November 15, 2006 (71 FR 66431), respectively. The OMB guidance can be found in 2 CFR Part 180, Subtitle A, Chapter I. These actions by the Department implement OMB initiatives to streamline and consolidate all federal regulations on nonprocurement suspension and debarment into one part of the CFR. In addition, this rule removes 49 CFR Part 29, regulations that reflect the Department's implementation of the government-wide common rule on nonprocurement suspension and debarment. These changes are non-substantive in nature and constitute an administrative simplification that would make no substantive change in Department policy or procedures for nonprocurement suspension and debarment.
Average Fuel Economy Standards, Passenger Cars and Light Trucks; Model Years 2011-2015
This document proposes substantial increases in the Corporate Average Fuel Economy (CAFE) standards for passenger cars and light trucks that would enhance energy security by improving fuel economy. Since the carbon dioxide (CO2) emitted from the tailpipes of new motor vehicles is the natural by-product of the combustion of fuel, the increased standards would also address climate change by reducing tailpipe emissions of CO2. Those emissions represent 97 percent of the total greenhouse gas emissions from motor vehicles. Implementation of the new standards would dramatically add to the billions of barrels of fuel already saved since the beginning of the CAFE program in 1975.
Passenger Car Average Fuel Economy Standards-Model Years 2008-2020 and Light Truck Average Fuel Economy Standards-Model Years 2008-2020; Request for Product Plan Information
The purpose of this request for comments is to acquire new and updated information regarding vehicle manufacturers' future product plans to assist the agency in analyzing the proposed passenger car and light truck corporate average fuel economy (CAFE) standards as required by the Energy Policy and Conservation Act, as amended by the Energy Independence and Security Act (EISA) of 2007, Pub. L. 110-140. This proposal is discussed in a companion notice published today.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.