Department of Transportation 2006 – Federal Register Recent Federal Regulation Documents
Results 2,101 - 2,150 of 3,043
Agency Information Collection Activities: Request for Comments for New Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a new information collection, which is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Decision That Nonconforming 2002 and 2003 Ferrari 575 Passenger Cars Are Eligible for Importation
This document announces a decision by the National Highway Traffic Safety Administration (NHTSA) that certain 2002 and 2003 Ferrari 575 passenger cars that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards (FMVSS) are eligible for importation into the United States because they are substantially similar to vehicles originally manufactured for importation into and sale in the United States and that were certified by their manufacturer as complying with the safety standards (the U.S. certified version of the 2002 and 2003 Ferrari 575 passenger cars), and they are capable of being readily altered to conform to the standards.
Notice of Receipt of Petition for Decision That Nonconforming 1999 BMW Z3 European Market Passenger Cars Are Eligible for Importation
This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 1999 BMW Z3 European market passenger cars that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards are eligible for importation into the United States because (1) they are substantially similar to vehicles that were originally manufactured for importation into and sale in the United States and that were certified by their manufacturer as complying with the safety standards, and (2) they are capable of being readily altered to conform to the standards.
Schedule of Fees Authorized by 49 U.S.C. 30141
This document proposes fees for Fiscal Year 2007 and until further notice, as authorized by 49 U.S.C. 30141, relating to the registration of importers and the importation of motor vehicles not certified as conforming to the Federal motor vehicle safety standards (FMVSS). These fees are needed to maintain the registered importer (RI) program.
Elderly Individuals and Individuals With Disabilities, Job Access and Reverse Commute, New Freedom Programs and Coordinated Public Transit-Human Services Plans: Notice of Public Meeting, Interim Guidance for FY06 Implementation, and Proposed Strategies for FY07
The Federal Transit Administration is extending the comment period through May 22, 2006, for interested parties to submit comments to assist FTA in developing guidance in the form of circulars to help grantees in implementing the Elderly Individuals and Individuals With Disabilities Program, the Job Access and Reverse Commute Program, and the New Freedom Program beginning in FY07.
Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 Airplanes
We are adopting a new airworthiness directive (AD) for all Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 airplanes equipped with certain crew seat bucket assemblies with and without a backrest recline system. This AD requires you to replace the backrest tubes on these crew seat bucket assemblies at a specified time and adds a life limit for these backrest tubes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. We are issuing this AD to prevent cracks in the backrest tubes of certain crew seat bucket assemblies, which could result in failure of the seat system. This failure could lead to the pilot and co-pilot's reduced ability to control the airplane. This failure could also affect the proper function of the seat restrain system in the case of an emergency landing.
Airworthiness Directives; General Electric Company CT64-820-4 Turboprop Engines
The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CT64-820-4 turboprop engines with certain part number (P/N) rotating parts. The parts are in the compressor rotor assembly, gas generator turbine rotor assembly, and power turbine rotor assembly that are subject to low-cycle fatigue. This AD requires removing from service these affected rotating parts at reduced compliance times. This AD results from the manufacturer's discovery of cracks in some rotating parts. We are issuing this AD to prevent cracks in the rotating parts that could cause compressor and turbine wheel fracture and uncontained engine failure. An uncontained engine failure could cause possible damage to the airplane.
Environmental Impact Statement on New Transit Operations in Madison, WI
The Federal Transit Administration (FTA) and the City of Madison, WI (Madison) intend to prepare an Environmental Impact Statement (EIS) in accordance with the National Environmental Policy Act (NEPA) for a proposal by Madison to implement new transit operations in an approximately 13-mile travel corridor extending from the City of Middleton on the west, through the campus of the University of Wisconsin-Madison to the Isthmus of Madison, WI to the American Parkway interchange on US 151, southwest of Sun Prairie, WI and encompassing the surrounding urbanized areas. Growing mobility challenges coupled with very limited opportunity for highway capacity expansion has prompted the communities in the area to consider investment in transportation improvements, both to supplement and enhance existing Metro bus service and to extend service to new markets throughout the corridor and in the region. Alternatives proposed to be considered in the draft EIS include No Build, the Transportation System Management (TSM) Alternative and various Build Alternatives.
Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2007 Light Duty Truck Lines Subject to the Requirements of This Standard and Exempted Vehicle Lines for Model Year 2007
This final rule announces NHTSA's determination that no new model year (MY) 2007 light duty truck lines are subject to the parts- marking requirements of the Federal motor vehicle theft prevention standard because they have been determined by the agency to be high- theft or that they have a majority of interchangeable parts with those of a passenger motor vehicle line. This final rule also identifies those vehicle lines that are exempted from the parts-marking requirements because the vehicles are equipped with antitheft devices determined to meet certain statutory criteria pursuant to the statute relating to motor vehicle theft prevention.
Airworthiness Directives; Air Tractor, Inc. Models AT-400; AT-401, AT-401B, AT-402, AT-402A, and AT-402B Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Air Tractor, Inc. (Air Tractor) Models AT-400, AT-401, AT-401B, AT-402, AT-402A, and AT-402B airplanes. This AD requires you to lower the safe life for the wing lower spar cap for certain Models AT-402A and AT-402B airplanes and those that incorporate or have incorporated Marburger Enterprises, Inc. (Marburger) winglets. For Models AT-400, AT-401, AT-401B, AT-402, and certain AT-402A, airplanes, this AD requires you to repetitively inspect the wing lower spar cap in order to reach the safe life. We also developed an alternative method of compliance (AMOC) to the requirements of this Ad for certain Models AT- 402A and AT-402B airplanes. The AMOC includes repetitive eddy current inspections, modification of the center splice connection, and lower spar cap replacement. This AD is the result of reports of cracks in the \3/8\-inch bolt hole of the wing lower spar cap before reaching the approved safe life. We are issuing this AD to prevent fatigue cracks from occurring in the wing lower spar cap before the originally established safe life is reached. Fatigue cracks in the wing lower spar cap, if not detected and corrected, could result in wing separation and loss of control of the airplane.
Airworthiness Directives; Air Tractor, Inc. Models AT-802 and AT-802A Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Air Tractor, Inc. (Air Tractor) Models AT-802 and AT-802A airplanes. This AD requires you to repetitively inspect (using the eddy current method) the two outboard fastener holes in both of the wing main spar lower caps at the center splice joint for cracks and repair or replace any cracked spar cap. This AD results from in-service fatigue cracking of the wing main spar lower cap at the center splice joint outboard fastener hole at hours time-in-service below the safe life limit established for these airplanes in AD 2002-11-05. We are issuing this AD to detect and correct cracks in the wing main spar lower cap at the center splice joint, which could result in failure of the spar cap and lead to wing separation and loss of control of the airplane.
Federal Motor Vehicle Safety Standards; Low-Speed Vehicles
This final rule amends the definition of ``low-speed vehicle'' (LSV) by increasing the Gross Vehicle Weight Rating (GVWR) limit for the class of LSVs to those vehicles with a GVWR of less than 1,361 kilograms (3,000 pounds).
Airworthiness Directives; Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD would require repetitive inspections to detect cracks in the vertical beam webs of the body station (BS) 178 bulkhead, and corrective actions if necessary. This proposed AD also would require a terminating modification for the repetitive inspections. This proposed AD results from reports of numerous cracks in the vertical beam webs. We are proposing this AD to prevent fatigue cracks in certain vertical beam webs, which could result in loss of structural integrity of the BS 178 bulkhead, and consequently could impair the operation of the control cables for the elevators, speed brakes, and landing gear, or could cause the loss of cabin pressure.
Nondiscrimination on the Basis of Disability in Air Travel-Accommodations for Individuals Who Are Deaf, Hard of Hearing, or Deaf-Blind
The Department is extending through June 24, 2006, the period for interested persons to submit comments to its proposed rule on accommodations for individuals who are deaf, hard of hearing, or deaf- blind.
Procedures for Participating in and Receiving Data From the National Driver Register Problem Driver Pointer System Pursuant to a Personnel Security Investigation and Determination
This final rule announces that the amendments to the agency's National Driver Register (NDR) regulations that were published in an interim final rule to reflect changes made to the National Driver Register Act of 1982 by Section 1061 of the Ronald W. Reagan National Defense Authorization Act for Fiscal Year 2005 (Pub. L. 108-375) will remain in effect with one minor change. The amendments authorize a Federal department or agency that investigates an individual for the purpose of determining the individual's eligibility to access national security information to request and receive information from the National Driver Register, upon request and consent of the individual. This final rule establishes the procedures for individuals to request and for the Federal department or agency to receive NDR information.
Dealer's Aircraft Registration Certificates
The Federal Aviation Administration will begin assigning permanent Dealer's Aircraft Registration Certificate numbers to manufacturers and dealers who currently hold an unexpired dealer's certificate and any new issuances.
Modification of Class E Airspace; Scott City, KS.
This document confirms the effective date of the direct final rule which revises Class E airspace at Scott City, KS.
Modification of Class E Airspace; Mason City Municipal Airport, IA
This action amends Title 14 Code of Federal Regulations, part 71 (14 CFR 71) by revising Class E airspace areas at Mason City Municipal Airport, IA. A review of the Class E airspace surface area and the Class E airspace area extending upward from 700 feet above ground level (AGL) revealed neither area complies with criteria in FAA Orders. These airspace areas and their legal descriptions are modified to conform to the criteria in FAA Orders.
Approval of Noise Compatibility Program for Buffalo Niagara International Airport, NY
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program submitted by the Niagara Frontier Transportation Authority (NFTA) under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR Part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). On September 7, 2005 the FAA determined that the noise exposure maps submitted by the Niagara Frontier Transportation Authority under Part 150 were in compliance with applicable requirements. On March 3, 2006, the FAA approved Buffalo Niagara International Airport's noise compatibility program. Most of the recommendations of the program update were approved. Four measures were disapproved for Part 150 purposes.
Aging Aircraft Program: Widespread Fatigue Damage
This action is intended to prevent widespread fatigue damage by proposing to require that design approval holders establish operational limits on transport category airplanes. Design approval holders would also be required to determine if maintenance actions are needed to prevent widespread fatigue damage before an airplane reaches its operational limit. Operators of any affected airplane would be required to incorporate the operational limit and any necessary service information into their maintenance programs. Operation of an affected airplane beyond the operational limit would be prohibited, unless an operator has incorporated an extended operational limit and any necessary service information into its maintenance program.
Airworthiness Directives; Rolls-Royce plc RB211 Trent 800 Series Turbofan Engines
This action withdraws a notice of proposed rulemaking (NPRM). That NPRM proposed to revise the existing airworthiness directive (AD) applicable to Rolls-Royce plc (RR) Model RB211 Trent 892, 884, 877, 875, and 892B series turbofan engines. That proposed rule would have required initial and repetitive inspections of the angled drive upper shroud, the intermediate gearbox housing (IGH), and the external gearbox lower bevel box (LBB) housing, and initial and repetitive master magnetic chip detector (MCD) inspections. Since we issued that proposed rule, RR notified us that after reviewing the service experience and the original actions taken, the unsafe condition no longer exists and mandatory actions required by the proposed rule are no longer required. Accordingly, we withdraw the proposed rule.
Construction and Maintenance
The FHWA proposes to revise certain provisions in 23 CFR part 635 subpart D to address section 5514 of the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU) that requires the FHWA to ensure that the States provide for competition with respect to the specification of alternative types of culvert pipes. This action is in addition to the FHWA's guidance memoranda previously issued on this subject.
Airworthiness Directives; Turbomeca Arriel 1B, 1D, 1D1, and 1S1 Turboshaft Engines
The FAA proposes to revise an existing airworthiness directive (AD) for certain Turbomeca Arriel 1B, 1D, 1D1, and 1S1 turboshaft engines. That AD currently requires initial and repetitive position checks of the gas generator 2nd stage turbine blades on all Turbomeca Arriel 1B, 1D, 1D1, and 1S1 turboshaft engines. That AD also currently requires initial and repetitive replacements of 2nd stage turbines on 1B, 1D, and 1D1 engines only. This proposed AD revision would require the same actions, but would relax the compliance times for initially replacing 2nd stage turbines in Arriel 1B, 1D, and 1D1 turboshaft engines. This proposed AD revision results from a request by Turbomeca to clarify the compliance times for 2nd stage turbine initial replacement on Arriel 1D, 1D1, and 1B turboshaft engines. We are proposing this AD revision to clarify and relax the AD compliance times for 2nd stage turbine initial replacement on Arriel 1B, 1D, and 1D1 turboshaft engines. We are also proposing this AD revision to prevent inflight engine shutdown and subsequent forced autorotation landing or accident.
Airworthiness Directives; General Electric Company CF6-50C Series Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for certain General Electric Company (GE) CF6-50C series turbofan engines. This proposed AD would require reworking the forward fan stator case and installing a fan module secondary containment shield. This proposed AD results from reports of uncontained fan blade failures causing damage and separation of airplane hydraulic lines. We are proposing this AD to prevent uncontained fan blade failures, which can result in separation of airplane hydraulic lines, damage to critical airplane systems, and possible loss of airplane control.
The Kansas City Southern Railway Company-Trackage Rights Exemption-The Texas Mexican Railway Company
Revised Noise Exposure Maps Baltimore/Washington International Thurgood Marshall Airport
The Federal Aviation Administration (FAA) announces its determination that the revised noise exposure maps submitted by the Maryland Aviation Administration for Baltimore/Washington International Thurgood Marshall Airport under the provisions of Title I of the Aviation Safety and Noise Abatement Act of 1979 (Pub. L. 96-193) and CFR part 150 are in compliance with applicable requirements.
Removal of Class E Airspace; Paducah Farrington Airpark, KY
This action removes the Class E5 Airspace at Paducah Farrington Airpark, KY, as there is no longer a Standard Instrument Approach Procedure (SIAP) for Paducah Farrington Airpark requiring Class E5 airspace.
Establishment of Class D Airspace; Bay St. Louis, MS
This action establishes Class D airspace at Bay St. Louis, MS. A Federal contract tower with a weather reporting system is being constructed at the Stennis International Airport. Therefore, the airport will meet the criteria for establishment of Class D airspace. Class D surface area airspace is required when the control tower is open to contain existing Standard Instrument Approach Procedures (SIAPs) and other Instrument Flight Rules (IFR) operations at the airport. This action will establish Class D airspace extending upward from the surface, to and including 2,500 feet MSL, within a 4.2-mile radius of the airport.
Airworthiness Directives; General Electric Company Aircraft Engines (GEAE) CT7-8A Turboshaft Engines
This document publishes in the Federal Register an amendment adopting emergency airworthiness directive (EAD) 2006-06-51 that we sent previously to all known U.S. owners and operators of GEAE CT7-8A turboshaft engines installed on Sikorsky S92 helicopters. This AD requires initial and repetitive inspections of the electrical chip detectors for the No. 3 bearing. This AD results from two failures of the No. 3 bearing in GEAE CT7-8A engines. We are issuing this AD to prevent failures of the No. 3 bearings and possible dual in-flight shutdowns of the engines.
Airworthiness Directives; Air Tractor, Inc. Model AT-501 Airplanes
The FAA is adopting a new airworthiness directive (AD) to revise AD 2002-11-05, which applies to certain Air Tractor, Inc. (Air Tractor) AT-400 series and Models AT-501, AT-802, and AT-802A airplanes. AD 2002-11-05 establishes a safe life for the wing lower spar cap. Since we issued AD 2002-11-05, we have received reports of cracks found prior to the established safe life on AT-400 series airplanes and on Model AT-802A airplanes. We are issuing separate AD actions for AT-400 series and Models AT-802 and AT-802A airplanes to address the unsafe condition of those airplanes. This AD retains the actions required in AD 2002-11-05 for Model AT-501 airplanes and removes AT-400 series and Models AT-802 and AT-802A airplanes from the applicability of AD 2002-11-05.
Standard Instrument Approach Procedures; Miscellaneous Amendments
This amendment amends Standard Instrument Approach Procedures (SIAPs) for operations at certain airports. These regulatory actions are needed because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addition of new obstacles, or changes in air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, Weather Takeoff Minimums; Miscellaneous Amendments
This amendment establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and/or Weather Takeoff Minimums for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addition of new obstacles, or changes in air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Brantly International, Inc. Model B-2, B-2A, and B-2B Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Brantly International, Inc. (Brantly) model helicopters. This action requires certain inspections and measurements of the upper tail rotor vertical gearbox (gearbox), vertical shaft (shaft) and shaft housing (housing) and their associated parts; and of the intermediate gear box bushing (bushing). This amendment is prompted by an accident and an incident report of fatigue cracking of a shaft. The actions specified in this AD are intended to prevent fatigue cracking of a shaft, failure of a shaft, and subsequent loss of control of the helicopter.
TIFIA Program Public Meeting
The DOT seeks views on regulatory implementation of changes made by SAFETEA-LU to the TIFIA statute. All interested persons are invited to offer views at two public meetings.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 18 individuals. FMCSA has statutory authority to exempt individuals from its vision standards if the exemptions granted will not compromise safety. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the vision standard prescribed in 49 CFR 391.41(b)(10). The Agency has concluded that granting these exemptions will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to exempt 19 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSR). The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the vision standard prescribed in 49 CFR 391.41(b)(10). The Agency has concluded that granting these exemptions will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these CMV drivers.
Demonstration of Enhanced Human Service Transportation Models: Phase 1-System Development and Design
This notice is a request for proposals (RFP) for system development and design of enhanced human service transportation models. The USDOT seeks up to 10 local communities to carry out detailed development and design of coordinated human service transportation systems that utilize Intelligent Transportation Systems capabilities. The expected results from Phase 1 include up to 10 ``deployment- ready,'' replicable and scalable system detailed designs for enhanced human service transportation delivery models in communities representing a variety of operational environments and scenarios.
Proposed Cancellation of the Air Taxi Authority of Aero Leasings, Inc. D/B/A Air Florida Airlines
The Department of Transportation is directing all interested persons to show cause why it should not issue an order (1) finding that Aero Leasings, Inc. d/b/a Air Florida Airlines lacks the compliance disposition to hold part 298 exemption authority (2) proposing to cancel its part 298 exemption authority.
National Fuel Cell Bus Technology Development Program
This competitive solicitation is for fiscal year 2006-2009 funding, subject to congressional appropriations action, for the new National Fuel Cell Bus Technology Development Program (NFCBP), administered by the Federal Transit Administration. The purpose of the program is to facilitate the development of commercially viable fuel cell bus technology and related infrastructure. FTA intends to enter into grants, contracts, and cooperative agreements with no more than 3 geographically diverse nonprofit organizations and recipients under chapter 53 of title 49, United States Code, to conduct fuel cell bus technology and infrastructure projects under the program. Regional consortia in partnership with transit agencies are encouraged to apply. The Federal share of the cost of a project carried out under this Program shall not exceed 50 percent of such cost.
Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Request of modifications of special permits (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffic ``M'' denote a modification request. These applications have been separated from the new applications for special permits to facilitate processing.
Office of Hazardous Materials Safety; Notice of Application for Special Permits
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
