Department of Transportation March 23, 2005 – Federal Register Recent Federal Regulation Documents

This notice proposes to create a Class E2 surface area at Valentine, NE. It also proposes to modify the Class E5 airspace at Valentine, NE.

Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption, part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of a certain petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.

The FAA proposes to adopt a new airworthiness directive (AD) for certain GROB-WERKE Model G120A airplanes. This proposed AD would require you to replace the main landing gear (MLG) up-lock hook assembly. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. We are issuing this proposed AD to prevent the MLG from becoming jammed and not extending, which could result in loss of control of the airplane during landing.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Model A319, A320, and A321 series airplanes. This proposed AD would require modifying the floor proximity emergency escape path marking system. This proposed AD is prompted by information that there is not adequate floor path lighting and marking for safe evacuation of the airplane in the event of an emergency. We are proposing this AD to prevent inadequate lighting and marking of the escape path, which could delay or impede the flight crew and passengers when exiting the airplane during an emergency landing.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 757-200 and -300 series airplanes. This proposed AD would require replacing certain electrical panels with certain new panels. This proposed AD is prompted by a report of some loose wire terminations in the P50 panel that caused intermittent indications in the flight deck. We are proposing this AD to prevent intermittent indications in the flight deck, incorrect circuitry operation in the panels, and airplane system malfunctions that may adversely affect the alternate flaps, alternate gear extension, and fire extinguishing.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 747-200C and 747-200F series airplanes. This proposed AD would require one-time inspections for cracks and material loss in the fuselage skin above the stringer (STR) 23 lap splice, between Body Station (BS) 282 and BS 298, and repair if necessary. This proposed AD is prompted by a report of a crack above the STR 23 lap splice on one airplane. We are proposing this AD to detect and correct cracks or material loss in the fuselage skin, and consequent reduced structural integrity of the skin panel, which could result in rapid depressurization of the airplane.

The FAA proposes to revise Airworthiness Directive (AD) 2003- 19-14 R1, which applies to certain BURKHART GROB LUFTUND RAUMFAHRT GmbH & CO KG (GROB) Models G103 TWIN ASTIR, G103A TWIN II ACRO, and G103C TWIN III ACRO sailplanes. AD 2003-19-14 R1 requires you to modify the airspeed indicators, install flight speed reduction and aerobatic maneuver restrictions placards (as applicable), and revise the flight and maintenance manuals. AD 2003-19-14 R1 approves simple aerobatic maneuvers for Model G103A TWIN II ACRO sailplanes and provides an option for modifying the rear fuselage for Models G103A TWIN II ACRO and G103C TWIN III ACRO sailplanes to terminate the flight limitation restrictions for aerobatic maneuvers. This proposed AD retains all the actions from AD 2003-19-14 R1 for Models G103A TWIN II ACRO and G103C TWIN III ACRO and would reinstate certain operating limits for Model G103 TWIN ASTIR sailplanes. We are issuing this proposed AD to prevent damage to the fuselage during limit load flight, which could result in reduced structural integrity. This condition could lead to loss of control of the sailplane.

This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 2002 Jeep Liberty multipurpose passenger vehicles that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards, are eligible for importation into the United States because (1) they are substantially similar to vehicles that were originally manufactured for sale in the United States and that were certified by their manufacturer as complying with the safety standards, and (2) they are capable of being readily altered to conform to the standards.

This action revokes the Class E airspace area at Palmer Metropolitan Airport, MA. This action is prompted by our cancellation of the standard instrument approach procedures to the airport when the airport converted from Instrument Flight Rule (IFR) public use to a Visual Flight Rule (VFR) private use airport.