2017 – Federal Register Recent Federal Regulation Documents

The Environmental Protection Agency (EPA) is proposing to approve portions of the December 9, 2015, State Implementation Plan (SIP) submission, submitted by the State of Alabama, through the Alabama Department of Environmental Management (ADEM), for inclusion into the Alabama SIP. This proposal pertains to the infrastructure requirements of the Clean Air Act (CAA or Act) for the 2012 annual particulate matter (PM2.5) national ambient air quality standard (NAAQS). The CAA requires that each state adopt and submit a SIP for the implementation, maintenance and enforcement of each NAAQS promulgated by EPA, which is commonly referred to as an ``infrastructure SIP.'' ADEM certified that the Alabama SIP contains provisions that ensure the 2012 Annual PM2.5 NAAQS is implemented, enforced, and maintained in Alabama. EPA is proposing to determine that Alabama's infrastructure SIP submission provided to EPA on December 9, 2015, satisfies certain required infrastructure elements for the 2012 Annual PM2.5 NAAQS.

On December 12, 2016, pursuant to section 112(l) of the Clean Air Act (CAA), the Tennessee Department of Environment and Conservation (TDEC) requested approval to implement and enforce State permit terms and conditions that substitute for the National Emission Standards for Hazardous Air Pollutants (NESHAP) from Plating and Polishing Operations with respect to the operation of the Ellison Surface Technologies, Inc. facility in Morgan County, Tennessee (Ellison). The Environmental Protection Agency is proposing to approve this request, and thus, proposing to grant TDEC the authority to implement and enforce alternative requirements in the form of title V permit terms and conditions after the EPA has approved the State's alternative requirements.

On December 12, 2016, pursuant to section 112(l) of the Clean Air Act (CAA), the Tennessee Department of Environment and Conservation (TDEC) requested approval to implement and enforce State permit terms and conditions that substitute for the National Emission Standards for Hazardous Air Pollutants (NESHAP) from Plating and Polishing Operations with respect to the operation of the Ellison Surface Technologies, Inc., facility in Morgan County, Tennessee (Ellison). The Environmental Protection Agency is approving this request, and thus, granting TDEC the authority to implement and enforce alternative requirements in the form of title V permit terms and conditions after the EPA has approved the State's alternative requirements.

The Coast Guard will enforce a safety zone for the San Diego, CA POPS Fireworks Display on the waters of San Diego Bay, CA on specific evenings from June 30, 2017 to September 3, 2017. This safety zone is necessary to provide for the safety of the participants, spectators, official vessels of the events, and general users of the waterway. Our regulation for the Southern California Annual Firework Events for the San Diego Captain of the Port Zone identifies the regulated area for the events. During the enforcement period, no spectators shall anchor, block, loiter in, or impede the transit of official patrol vessels in the regulated area without the approval of the Captain of the Port, or designated representative.

NMFS proposes regulations to allow an exemption to enable vessels with Federal Limited Access General Category Individual Fishing Quota permits from the State of Maine and Commonwealth of Massachusetts to continue fishing in their respective state waters once NMFS has announced that the Federal Northern Gulf of Maine total allowable catch has been fully harvested in a given year. Additionally, Massachusetts has requested that Federal Limited Access General Category Northern Gulf of Maine permits also be included in its exemption. Both states have requested this exemption as part of the Scallop State Water Exemption Program. This proposed rule is necessary to solicit comments on the state requests and to inform the public that NMFS is considering granting the requests.

This action establishes Class E airspace at Finleyville, PA, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving Finleyville Airpark. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport.

This rule identifies communities where the sale of flood insurance has been authorized under the National Flood Insurance Program (NFIP) that are scheduled for suspension on the effective dates listed within this rule because of noncompliance with the floodplain management requirements of the program. If the Federal Emergency Management Agency (FEMA) receives documentation that the community has adopted the required floodplain management measures prior to the effective suspension date given in this rule, the suspension will not occur and a notice of this will be provided by publication in the Federal Register on a subsequent date. Also, information identifying the current participation status of a community can be obtained from FEMA's Community Status Book (CSB). The CSB is available at https:// www.fema.gov/national-flood-insurance-program-community-statu s-book.

The Environmental Protection Agency (EPA) is taking final action to approve revisions to the Operating Permits Program for the State of Missouri submitted on March 16, 2015. These revisions update the emissions fee for permitted sources as set by Missouri Statute from $40 to $48 per ton of air pollution emitted annually, effective January 1, 2016. EPA is also responding to comments received on the proposed action published in the Federal Register on January 15, 2016. In addition, EPA is making a correction to the previous direct final rule published in the Federal Register on January 15, 2016. EPA inadvertently approved and codified this action under both part 52 (Approval and Promulgation of Implementation Plans) and part 70 (State Operating Permit Programs). This final rule removes the part 52 approval and codification and makes a clarification to the part 70 approval relating to the state effective date.

The Environmental Protection Agency (EPA) is taking direct final action to approve a revision to the Georgia State Implementation Plan (SIP) submitted by the Georgia Department of Natural Resources, Environmental Protection Division (GA EPD), on August 30, 2010, and a portion of the SIP revision submitted on July 25, 2014; and portions of revisions to the South Carolina SIP, submitted by the Department of Health and Environmental Control (SC DHEC) on December 15, 2014, August 12, 2015, and on November 4, 2016. The Georgia SIP revisions incorporate definitions relating to fine particulate matter (PM2.5), and amend state rules to reflect the 2008 national ambient air quality standard (NAAQS) for lead. The South Carolina SIP revisions incorporate the 2010 sulfur dioxide (SO2) NAAQS, 2010 nitrogen dioxide (NO2) NAAQS, 2012 PM2.5 NAAQS, 2015 ozone NAAQS, removes the revoked 1997 8-hour ozone NAAQS, and remove the standard for gaseous fluorides from the SIP. This action is being taken pursuant to the Clean Air Act (CAA or Act).

The Environmental Protection Agency (EPA) is approving portions of a State Implementation Plan (SIP) revision submitted by the State of Georgia, through the Georgia Department of Natural Resources' Environmental Protection Division (GA EPD), on September 19, 2006, with a clarification submitted on November 6, 2006. This direct final action approves changes to existing minor source permitting exemptions and approves a definition related to minor source permitting exemptions. EPA is approving these portions of this SIP revision because the State has demonstrated that they are consistent with the Clean Air Act (CAA or Act).

We propose to adopt a new airworthiness directive (AD) for Piaggio Aero Industries S.p.A. Model P-180 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as disbonding of the upper and lower metal skin from the honeycomb core on the elevator assembly and other flight control surfaces. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

The Environmental Protection Agency (EPA) is proposing to determine the Collin County Lead (Pb) Nonattainment Area (comprising the part of Collin County bounded to the north by latitude 33.153 North, to the east by longitude 96.822 West, to the south by latitude 33.131 North, and to the West by longitude 96.837 West, which surrounds the Exide Technologies property), hereinafter referenced to as Non- Attainment Area or NAA, as attainment for the 2008 Pb NAAQS. We are also proposing to approve two SIP revision requests made by the TCEQ in 2009 and 2012. These two requests include one made in 2009 requesting approval of the state's second 10-year maintenance plan for the 1978 Pb National Ambient Air Quality Standard (NAAQS) and one made in 2012 to approve the state's plan to demonstrate compliance with the 2008 Pb NAAQS. These two revisions represent a change in the Texas State Implementation Plan (SIP) for Pb. The details of all three proposals, and our complete analysis of the requirements for each and how the state's submission meets those requirements can be found in the accompanying direct final notice and technical support document (TSD) to this proposal. The TSD is available in the docket at https:// www.regulations.gov, Docket ID No. EPA-R06-OAR-2009-0750.

This direct final rule makes changes to comply with statutory modifications increasing NASA's approval authority for certain actions from $20,000 to $100,000 and makes nonsubstantive changes to clarify the existing notification and review procedures. Pursuant to statutory amendments, NASA's authority to approve certain claims has increased from $20,000 to $100,000. NASA is amending its implementing regulation accordingly. Prior to this statutory change, amounts over $20,000 had to be forwarded to officials within the Department of Justice for approval. The additional changes to procedures were made to comply with ``plain wording'' criteria and to incorporate debt collection procedural changes implemented under the Debt Collection Improvement Act of 1996. No substantive changes were made to existing NASA provisions for notice and review of claims or indebtedness. The revision to this rule is part of NASA's retrospective plan under Executive Order (E.O.) 13563 completed in August 2011.

We are superseding Airworthiness Directive (AD) 2003-18-06, which applied to certain Airbus Model A319-131 and -132 airplanes; Model A320-231, -232, and -233 airplanes; and Model A321-131 and -231 airplanes. AD 2003-18-06 required installing new anti-swivel plates and weights on the engine fan cowl door (FCD) latches and a new cowl door hold-open device. This AD retains the previous actions and requires modifying the engine FCDs, installing placards, and re-identifying the FCDs. This AD also adds airplanes to the applicability. This AD was prompted by reports of additional engine FCD in-flight losses, and a new FCD front latch and keeper assembly that has been developed to address this unsafe condition. We are issuing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for all Airbus Model A319 series airplanes, Model A320-211, -212, -214, -231, - 232, and -233 airplanes, and Model A321-111, -112, -131, -211, -212, - 213, -231, and -232 airplanes. This proposed AD was prompted by a runway excursion due to an unexpected thrust increase leading to an unstable approach performed using the current flight management and guidance computer (FMGC) standard. This proposed AD would require identification of potentially affected FMGCs, replacement of any affected FMGC, and applicable concurrent actions. We are proposing this AD to address the unsafe condition on these products.

This document contains rules that would amend the regulations of the Susquehanna River Basin Commission (Commission) to clarify application requirements and standards for review of projects, add a subpart to provide for registration of grandfathered projects, and revise requirements dealing with hearings and enforcement actions. These rules are designed to enhance the Commission's existing authorities to manage the water resources of the basin and add regulatory clarity.

The NTSB adds to its accident investigation procedures regulations a new subpart for marine casualty investigations. This interim final rule adopts a number of substantive and technical changes the NTSB proposed in its August 12, 2014 Notice of Proposed Rulemaking (NPRM), as those proposals were intended to apply to marine investigations. It also sets forth several changes specific to marine casualty investigations.

On May 12, 2016, the Occupational Safety and Health Administration (OSHA) published a rule entitled ``Improve Tracking of Workplace Injuries and Illnesses'' with an effective date of January 1, 2017 for the final rule's electronic reporting requirements. The final rule sets an initial deadline of July 1, 2017, as the date by which certain employers are required to submit the information from their completed 2016 Form 300A to OSHA electronically. This action proposes to extend the initial submission deadline for 2016 Form 300A data to December 1, 2017, to provide the new administration an opportunity to review the new electronic reporting requirements prior to their implementation and allow affected entities sufficient time to familiarize themselves with the electronic reporting system, which will not be available until August 1. The proposed five-month delay would be effective on the date of publication of a final rule in the Federal Register. OSHA also intends to issue a separate proposal to reconsider, revise, or remove other provisions of the prior final rule. OSHA will seek comment on those provisions in that separate proposal. In this proposal, OSHA only seeks comment on the delay of the July 1, 2017 compliance date to December 1, 2017.

The U.S. Nuclear Regulatory Commission (NRC) is proposing to amend its spent fuel storage regulations by revising the Holtec International (Holtec) HI-STORM Flood/Wind (FW) Multipurpose Canister (MPC) Storage System listing within the ``List of Approved Spent Fuel Storage Casks'' to include Amendment No. 3 to Certificate of Compliance (CoC) No. 1032. Amendment No. 3 revises authorized contents to allow burnup credit for fuel types in the MPC-37 and revises CoC Condition 8, which has been previously incorporated in Amendment No. 2 to CoC No. 1032.

As part of its ongoing, systematic review of all Federal Trade Commission rules and guides, the Commission announces a modified ten- year regulatory review schedule. No Commission determination on the need for, or the substance of, the rules and guides listed below should be inferred from this notice.

The Commission proposes amending the Textile Rules (``Rules and Regulations under the Textile Fiber Products Identification Act'') to delete the requirement that an owner of a registered word trademark furnish the FTC with a copy of the mark's registration with the United States Patent and Trademark Office (``USPTO'') before using the mark on labels, and to no longer restrict the use of such trademarks to only those also employed as house marks. Eliminating these requirements is expected to reduce compliance costs while increasing firms' flexibility.

The Coast Guard will enforce a safety zone for the City of Cleveland 4th of July, on Lake Erie and the Cleveland Harbor from 9:30 p.m. through 11 p.m. on Tuesday, July 4th, 2017. This action is necessary to provide for the safety of life and property on navigable waters during this event. Our regulation for Annual Fireworks Events in the Captain of the Port Buffalo Zone identifies the safety zone for this event. During the enforcement period, no person or vessel may enter the respective safety zone without the permission of the Captain of the Port Buffalo.

This action updates the using agency information for restricted areas R-3007A, R-3007B, R-3007C, and R-3007D, Townsend, GA. This is an administrative change to reflect the current organization tasked with using agency responsibilities for the restricted areas. It does not affect the boundaries, designated altitudes, time of designation or activities conducted within the restricted areas.