2005 – Federal Register Recent Federal Regulation Documents
Results 8,751 - 8,800 of 32,488
Section 272(b)(1)'s “Operate Independently” Requirement for Section 272 Affiliates; Corrections
The Federal Communications Commission published a document in the Federal Register on March 30, 2004 (69 FR 16494), revising Commission rules. That document inadvertently failed to remove paragraphs (a)(2) and (a)(3), and redesignate paragraph (a)(1) as paragraph (a). This document corrects the final regulations by revising these sections.
Bacillus Thuringiensis Cry34Ab1 and Cry35Ab1 Proteins and the Genetic Material Necessary for Their Production in Corn; Exemption from the Requirement of a Tolerance
This regulation establishes an exemption from the requirement of a tolerance for residues of the Bacillus thuringiensis Cry34Ab1 and Cry35Ab1 proteins and the genetic material necessary for their production in corn on corn, field; corn, sweet; and corn, pop when applied/used as a plant-incorporated protectant. Mycogen Seeds c/o Dow AgroSciences LLC submitted a petition to EPA under the Federal Food, Drug, and Cosmetic Act (FFDCA), as amended by the Food Quality Protection Act of 1996 (FQPA), requesting an exemption from the requirement of a tolerance. This regulation eliminates the need to establish a maximum permissible level for residues of Bacillus thuringiensis Cry34Ab1 and Cry35Ab1 proteins and the genetic material necessary for their production in corn.
Cyhexatin; Tolerance Actions
EPA is revoking, under the Federal Food, Drug, and Cosmetic Act (FFDCA) section 408(e)(1), all existing tolerances for residues of the insecticide/acaricide cyhexatin because they do not meet requirements of FFDCA section 408(b)(2). EPA canceled food use registrations for cyhexatin in 1989. Currently, EPA determined that acute dietary risks from use of cyhexatin on commodities for which import tolerances exist exceed the Agency's level of concern. However, EPA also determined that if the only cyhexatin tolerance is for orange juice, there is a reasonable certainty that no harm to any population subgroup will result from exposure to cyhexatin treated oranges. Because manufacturers support a cyhexatin tolerance on orange juice for purposes of importation and the Agency has made a determination of safety for such a tolerance, EPA is establishing, concurrent with the revocation of the citrus fruit group tolerance, an individual time- limited tolerance on orange juice. The regulatory actions in this document contribute toward the Agency's tolerance reassessment requirements of the FFDCA section 408(q), as amended by the Food Quality Protection Act (FQPA) of 1996. By law, EPA is required by August 2006 to reassess the tolerances in existence on August 2, 1996. The regulatory actions in this document pertain to the revocation of 41 tolerances which count as tolerance reassessments toward the August, 2006 review deadline.
Aminopyridine, Ammonia, Chloropicrin, Diazinon, Dihydro-5-heptyl-2(3H)-furanone, Dihydro-5-pentyl-2(3H)-furanone, and Vinclozolin; Tolerance Actions
EPA is revoking specific tolerances and tolerance exemptions for residues of the bird repellent 4-aminopyridine, fungicides ammonia and vinclozolin, and insecticides chloropicrin, diazinon, dihydro-5- heptyl-2(3H)-furanone, and dihydro-5-pentyl-2(3H)-furanone. EPA canceled food use registrations or deleted food uses from registrations following requests for voluntary cancellation or use deletion by the registrants, or non-payment of registration maintenance fees. The regulatory actions in this document contribute toward the Agency's tolerance reassessment requirements of the Federal Food, Drug, and Cosmetic Act (FFDCA) section 408(q), as amended by the Food Quality Protection Act (FQPA) of 1996. By law, EPA is required by August 2006 to reassess the tolerances in existence on August 2, 1996. The regulatory actions in this document pertain to the revocation of 39 tolerances and tolerance exemptions of which 33 count as tolerance reassessments toward the August, 2006 review deadline.
Airworthiness Directives; PZL-Swidnik S.A. Models PW-5 “Smyk” and PW-6U Gliders
The FAA adopts a new airworthiness directive (AD) for certain PZL-Swidnik S.A. (PZL-Swidnik) Models PW-5 ``Smyk'' and PW-6U gliders. This AD requires you to inspect for the minimum dimension of the left side aileron, right side aileron, and airbrake push-rod ends for certain Model PW-5 ``Smyk'' gliders; inspect for the minimum dimension of the aileron, airbrake, and elevator control push-rod ends for certain Model PW-6U gliders; and replace any push-rod end that does not meet the minimum dimension. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Poland. We are issuing this AD to detect and replace any push-rod end that does not meet the minimum dimension, which could result in failure of the control system. This failure could lead to loss of control of the glider.
Airworthiness Directives; The New Piper Aircraft, Inc., Models PA-28-160, PA-28-161, PA-28-180, and PA-28-181 Airplanes
The FAA adopts a new airworthiness directive (AD) for certain The New Piper Aircraft, Inc. (Piper) Models PA-28-160, PA-28-161, PA- 28-180, and PA-28-181 airplanes that incorporate Petersen Aviation, Inc. Supplemental Type Certificate (STC) SA2660CE installed between April 20, 1998, and April 1, 2005, and incorporate Petersen Aviation, Inc. Service Bulletin SB98-1. This AD requires you to replace the AN894-6-4 bushing screw thread expanders on the gascolator and bushing attached to the inlet of the top fuel pump with NAS1564-6-4J reducers and AN818-6 nuts. This AD results from reports of fuel leaks during the post STC installation tests. We are issuing this AD to prevent fuel fittings used in STC SA2660CE from leaking fuel in the engine compartment, which could result in an engine fire. This condition could lead to loss of control of the airplane.
Airworthiness Directives; Short Brothers Model SD3 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all Short Brothers Model SD3-30 and SD3-60 airplanes equipped with certain fire extinguishers. That AD currently requires replacement of the covers for fire extinguisher adapter assemblies that are installed on certain bulkheads with new covers that swivel to lock the extinguishers in place; and replacement of nozzles and triggers on these fire extinguishers with better fitting nozzles and stronger triggers. The existing AD also currently requires the installation of new fire extinguisher point placards and a revision of the airplane flight manual (AFM) to instruct the flightcrew in the use of the new covers for these adapter assemblies. This new AD also requires modification of the fire extinguishing point adapter assembly of the forward and aft baggage bays as applicable. This new AD also adds airplanes to the applicability. For these new airplanes, this new AD requires a revision to the AFM for instructions on using the new fire extinguisher adapter. This AD results from reports of individuals experiencing fire extinguishant blowback when the extinguishant discharges through the fire extinguishing point adapters. We are issuing this AD to prevent fire extinguishant blowback, which could result in injury to a person using the fire extinguisher in the event of a fire.
Airworthiness Directives; Boeing Model 737-300, -400, -500, -600, -700, -700C, -800 and -900 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-300, -400, -500, -600, -700, -700C, -800 and - 900 series airplanes. This AD requires installing an updated version of the operational program software (OPS) and certain other software in the flight management computers (FMCs); and doing configuration checks to ensure that certain software is properly installed and doing other specified actions. This AD also requires reinstalling software, if necessary. This AD results from one operator reporting FMC map shifts on several Model 737-400 series airplanes with dual FMCs, using OPS version U10.4A. We are issuing this AD to prevent the FMC from displaying the incorrect actual navigation performance value to the flightcrew, which could prevent adequate alerting of a potential navigation error. This condition could result in a near miss with other airplanes or terrain, or collision if other warning systems also fail.
Airworthiness Directives; Airbus Model A330-301, -321, -322, -341, and -342 Airplanes; and Model A340-200 and A340-300 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A330-301, -321, -322, -341, and -342 airplanes; and Model A340-200 and A340-300 series airplanes. This AD requires repetitive inspections for cracks of the inboard lower flange and radius of the left- and right-hand outboard floor beams at frame (FR) 48, and related investigative and corrective actions if necessary. This AD also provides an optional terminating action for the repetitive inspections. This AD results from reports that cracks were found during fatigue tests at the attachment between the canted lower flange of the floor beam and the pressure diaphragm in front of FR48 on both left- and right-hand floor beams; and that an additional crack was found in the flange radius of the floor beam. We are issuing this AD to detect and correct such cracking, which could propagate and result in reduced structural integrity of the fuselage.
Airworthiness Directives; British Aerospace Model HS 748 Airplanes
The FAA is adopting a new airworthiness directive (AD) for all British Aerospace Model HS 748 airplanes. This AD requires modifying the undercarriage of the nose landing gear (NLG). This AD results from a report that pintle pins could be installed in an incorrect manner during maintenance without maintenance personnel being aware (or having feedback) that the pin was installed incorrectly. We are issuing this AD to prevent jamming or collapse of the NLG, which could result in damage to the airplane structure or injury to passengers or crew.
Airworthiness Directives; Airbus Model A320-111 Airplanes and Model A320-200 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A320-111 airplanes and Model A320-200 series airplanes. This AD requires installing a bonding strip between each of the two water scavenge jet pumps of the center fuel tank and the rear spar in section 21. This AD results from the results of fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent an ignition source for fuel vapor in the wing, which could result in fire or explosion in the center wing fuel tank.
Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) Model 4101 Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to all BAE Systems (Operations) Limited (Jetstream) Model 4101 airplanes. That AD currently requires operators to determine the number of flight cycles accumulated on each component of the main landing gear (MLG) and the nose landing gear (NLG), and to replace each component that reaches its life limit with a serviceable component. The existing AD also requires operators to revise the Airworthiness Limitations section (ALS) of the Instructions for Continued Airworthiness in the aircraft maintenance manual to reflect the new life limits. This new AD requires revising the ALS to incorporate extended and more restrictive life limits for structurally significant items. This AD is prompted by engineering analysis of fleet operations which resulted in more restrictive life limits. We are issuing this AD to prevent failure of certain structurally significant items, including the MLG and the NLG, which could result in reduced structural integrity of the airplane.
Airworthiness Directives; Airbus Model A318-100, A319-100, A320-200, A321-100, and A321-200 Series Airplanes; and Model A320-111 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A318-100, A319-100, A320-200, A321-100, and A321- 200 series airplanes; and Model A320-111 airplanes. This AD requires modification of the electrical bonding of all structures and systems installed inside the center fuel tank. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent electrical arcing in the center fuel tank due to inadequate bonding, which could result in an explosion of the center fuel tank and consequent loss of the airplane.
Flutriafol; Receipt of Application for Emergency Exemption, Solicitation of Public Comment
EPA has received a quarantine exemption request from the Minnesota and South Dakota Departments of Agriculture to use the pesticide product flutriafol (Impact 125SC), (CAS No. 76674-21-0), on soybeans to control Asian soybean rust. The Applicant proposes the use of a new chemical which has not been registered by EPA. EPA is soliciting public comment before making the decision whether or not to grant the exemption.
Dynamac Corporation; Transfer of Data
This notice announces that pesticide related information submitted to EPA's Office of Pesticide Programs (OPP) pursuant to the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) and the Federal Food, Drug, and Cosmetic Act (FFDCA), including information that may have been claimed as Confidential Business Information (CBI) by the submitter, will be tranferred to Dynamac Corporation in accordance with 40 CFR 2.307(h)(3) and 2.308(i)(2). Dynamac Corporation has been awarded multiple work assignments to perform work for OPP, and access to this information will enable Dynamac Corporation to fulfill the obligations of the contract.
Flusilazole; Receipt of Application for Emergency Exemption, Solicitation of Public Comment
EPA has received a quarantine exemption request from the Minnesota and South Dakota Departments of Agriculture to use the pesticide flusilazole (Punch 3.3EC), CAS No. 85509-19-9, and a flusilazole + famoxadone premix (Charisma 1.7 EC) on soybeans to control Asian soybean rust. The Applicant proposes the use of a new chemical which has not been registered by the EPA. EPA is soliciting public comment before making the decision whether or not to grant the exemption.
Myclobutanil; Re-Establishment of a Tolerance for Emergency Exemption
This regulation re-establishes a time-limited tolerance for combined residues of the fungicide myclobutanil and its metabolite in or on artichoke, globe at 1.0 parts per million (ppm) for an additional 21/89/21/13/23/85/83/8 year period. This tolerance will expire and is revoked on December 31, 2007. This action is in response to EPA's granting of an emergency exemption under section 18 of the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) authorizing use of the pesticide on artichoke, globe. Section 408(l)(6) of the Federal Food, Drug, and Cosmetic Act (FFDCA) requires EPA to establish a time-limited tolerance or exemption from the requirement for a tolerance for pesticide chemical residues in food that will result from the use of a pesticide under an emergency exemption granted by EPA under FIFRA section 18.
Metconazole; Receipt of Application for Emergency Exemption, Solicitation of Public Comment
EPA has received a quarantine exemption request from the Minnesota and South Dakota Departments of Agriculture to use the pesticide metconazole (Caramba 90SL), CAS No. 125116-23-6, and a metconazole + pyraclostrobin co-pack (Headline-Caramba co-pack) on soybeans to control Asian soybean rust. Initially, a metconazole + pyraclostrobin premix product (Operetta 180EC) was also included in this quarantine exemption request. Operetta 180EC was subsequently withdrawn as a section 18 candidate. The Applicant proposes the use of a new chemical which has not been registered by the EPA. EPA is soliciting public comment before making the decision whether or not to grant the exemption.
Trunkline Gas Company, LLC; Notice of Annual Report of Flow Through of Cash Out and Penalty Revenues
New England Fishery Management Council; Public Meeting
The New England Fishery Management Council's (Council) Groundfish Oversight Committee will meet to consider actions affecting New England fisheries in the exclusive economic zone (EEZ).
Pacific Fishery Management Council; Public Meetings
The Pacific Fishery Management Council's (Council) Highly Migratory Species Management Team (HMSMT) and Ad Hoc Highly Migratory Species Management Committee (HMSMC) will hold work sessions, which are open to the public.
North Pacific Fishery Management Council; Notice of Public Meetings
The North Pacific Fishery Management Council (Council) and its advisory committees will hold public meetings October 5 through 11, 2005, at the Anchorage Hilton Hotel, 500 West 3rd Avenue, Anchorage, AK.
Mid-Atlantic Fishery Management Council (MAFMC); Meetings
The Mid-Atlantic Fishery Management Council (Council), its Research Set-Aside Committee, its Joint Spiny Dogfish Committee, its Ecosystems Committee, its Law Enforcement Committee, its Atlantic Mackerel, Squid, Butterfish Committee, and its Executive Committee will hold public meetings.
Guidance on Cashing and Accepting for Deposit Federal Emergency Management Agency (FEMA) Disaster Assistance Checks and Government Benefit Checks Issued by the U.S. Treasury; Hurricane Katrina
The Financial Management Service (FMS) is publishing additional guidance related to the cashing and accepting for deposit of U.S. Treasury checks for FEMA Disaster Assistance payments and Federal benefit payments (Treasury assistance and benefit checks), such as Social Security payments, to recipients who resided in areas affected by Hurricane Katrina. Depository institutions and retailers have experienced difficulty in confirming the identify of Hurricane Katrina evacuees seeking to cash Treasury checks. To encourage depository institutions and retailers to cash Treasury assistance and benefit checks for these individuals, FMS has established an interim policy to relieve depository institutions from liability in a reclamation action based on a forged or unauthorized indorsement. Under the interim policy, Treasury will relieve depository institutions from liability for cashing or subsequently accepting for deposit a Treasury assistance or benefit check bearing a forged or unauthorized indorsement, provided that the procedures set forth in the interim policy are followed.
Public Meeting; National Animal Identification System
The Animal and Plant Health Inspection Service will hold a public meeting concerning the animal movement tracking database component for the National Animal Identification System. The purpose of the meeting is to initiate dialogue about this initiative with industry stakeholders, including representatives of national organizations that represent livestock and poultry production sectors, livestock producers, and other interested individuals. This notice provides information on the discussion topics as well as the date, time, and place of the meeting.
Changes in Flood Elevation Determinations
Modified Base (1% annual chance) Flood Elevations (BFEs) are finalized for the communities listed below. These modified elevations will be used to calculate flood insurance premium rates for new buildings and their contents.
Final Flood Elevation Determinations
Base (1% annual chance) Flood Elevations (BFEs) and modified BFEs are made final for the communities listed below. The BFEs and modified BFEs are the basis for the floodplain management measures that each community is required either to adopt or to show evidence of being already in effect in order to qualify or remain qualified for participation in the National Flood Insurance Program (NFIP).
Agency Information Collection Activities: Submission for OMB Review; Comment Request
The Federal Emergency Management Agency (FEMA) has submitted the following information collection to the Office of Management and Budget (OMB) for review and clearance in accordance with the requirements of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35). The submission describes the nature of the information collection, the categories of respondents, the estimated burden (i.e., the time, effort and resources used by respondents to respond) and cost, and includes the actual data collection instruments FEMA will use. Title: Public Assistance Progress Report and Program Forms. OMB Number: 1660-0017. Abstract: This collection serves as the mechanism to administer the Public Assistance (PA) Program. The application process contains recordkeeping and reporting requirements via mandatory and optional completion of several forms and timeframes. The Progress Report and related forms ensure that FEMA and the State have up-to-date information on PA program grants. The report describes the status of project completion dates, and circumstances that could delay a project. States are responsible for determining reporting requirements for applicants and must submit reports quarterly to FEMA Regional Directors. The date of the report is determined jointly by the State and the Disaster Recovery Manager. Affected Public: State, local or tribal government, and Not-for- Profit Organizations. Number of Respondents: 5,070 respondents from State, local or tribal governments and Not-for Profit Organizations. Estimated Time per Respondent: 134 hours per respondent allocated as follows: Progress Report = 100 hours, Mandatory Audit = 30 hours; Mandatory forms = 3 hours; and Optional forms = 1 hour. Estimated Total Annual Burden Hours: 134,562 hours. Frequency of Response: Quarterly or Yearly. Comments: Interested persons are invited to submit written comments on the proposed information collection to the Office of Information and Regulatory Affairs at OMB, Attention: Desk Officer for the Department of Homeland Security/FEMA, Docket Library, Room 10102, 725 17th Street, NW., Washington, DC 20503, or facsimile number (202) 395-7285. Comments must be submitted on or before October 20, 2005.
Agency Information Collection Activities: Submission for OMB Review; Comment Request
The Federal Emergency Management Agency (FEMA) has submitted the following information collection to the Office of Management and Budget (OMB) for review and clearance in accordance with the requirements of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35). The submission describes the nature of the information collection, the categories of respondents, the estimated burden (i.e., the time, effort and resources used by respondents to respond) and cost, and includes the actual data collection instruments FEMA will use. Title: Standard Flood Hazard Determination Form. OMB Number: 1660-0040. Abstract: On September 23, 1994, the President signed the Riegle Community Development and Regulatory Improvement Act of 1994. Title V of this Act is the National Flood Insurance Reform Act (NFIRA). Section 528 of the NFIRA requires that FEMA develop a standard hazard determination form for recording the determination of whether a structure is located within an identified Special Flood Hazard Area available. Section 528 of the NFIRA also requires the use of this form by regulated lending institutions, Federal agency lending institutions, Federal agency lenders, the Federal National Mortgage Association, the Federal Home Loan Mortgage Corporation, and the Government National Mortgage Association for any loan made, increased, extended, renewed or purchased by these entities. The form developed to comply with the above requirements is the Standard Flood Hazard Determination form (FEMA Form 83-93, dated October 2002). This form will be completed by federally regulated lending institutions when making, increasing, extending, renewing or purchasing each loan for the purpose of documenting the factors considered as to whether flood insurance is required and available. An estimated 33,000,000 such uses are made each year. This number is entirely driven by the volume of mortgage transactions, of which fluctuations in interest rates is a principal factor. Affected Public: Business or other for-profit, Federal Government. Number of Respondents: 33,000,000. Estimated Time per Respondent: 0.33 hours (20 minutes). Estimated Total Annual Burden Hours: 10,890,000. Frequency of Response: Once. Comments: Interested persons are invited to submit written comments on the proposed information collection to the Office of Information and Regulatory Affairs at OMB, Attention: Desk Officer for the Department of Homeland Security/FEMA, Docket Library, Room 10102, 725 17th Street, NW., Washington, DC 20503, or facsimile number (202) 395-7285. Comments must be submitted on or before October 20, 2005.
Proposed Flood Elevation Determinations
Technical information or comments are requested on the proposed Base (1% annual chance) Flood Elevations (BFEs) and proposed BFE modifications for the communities listed below. The BFEs are the basis for the floodplain management measures that the community is required either to adopt or to show evidence of being already in effect in order to qualify or remain qualified for participation in the National Flood Insurance Program (NFIP).
Changes in Flood Elevation Determinations
This interim rule lists communities where modification of the Base (1% annual chance) Flood Elevations (BFEs) is appropriate because of new scientific or technical data. New flood insurance premium rates will be calculated from the modified BFEs for new buildings and their contents.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.